___

• Fuller D. D., A review of research in the field of gas-lubricated bearings, NASA Report, 2429, USA, 5-50, 1970.
• Uneeb M., Theoretical Investigation of Whirl Instability In Externally Pressurized Gas Journal Bearings, PhD Thesis, Imperial College of Science, Techgnologyand Medicine, London, UK, 29-92, 1992.
• Ausman J. S., The fluid dynamic theory of gas lubricated bearing, Trans. Amer. Soc. Lub., Engrs., 79 (6), 1218-1224, 1957.
• Gross W. A., Investigation of whirl in externally pressurized air-lubricated journal bearings, Trans. Amer. Soc. Mech. Engr. J. Basic Eng., 84, 132-140, 1962.
• Heinrich G., The theory of the externally pressurized bearings, 1st International Symposium on Gas-Lubricated Bearing, USA, 42, 1959.
• Wang J., Design of Gas Bearing Systems for Precision Applications, PhD. Thesis, Technische Universiteit, Eindhoven, 1-35, 1993.
• Lund J. W., A theoretical analysis of whirl instability and pneumatic hammer for a rigid rotor in pressurized gas journal bearing, An International Journal on the Science and Technology of Friction, Lubrication and Wear,12 (2), 154-166, 1967.
• Xu C., and Jiang, S. Dynamic Analysis of a Motorized Spindle With Externally Pressurized Air Bearings, Journal of Vibration and Acoustics, 137 (4), 041001, 2015.
• Du J., Zhang G., Liu T., To S., Improvement on load performance of externally pressurized gas journal bearings by openning pressure-equalizing grooves, Tribology International, 73 (May 2014), 156-166, 2014.
• Charki A., Diop K., Champmartin S., Ambari A. Numerical simulation and experimental study of thrust air bearings with multiple orifices, International Journal of Mechanical Sciences, 72, 28-38, 2013.
• Gao S, Cheng K., Chen S., Ding H and Fu H., Computational design and analysis of aerostatic journal bearing with application to ultra-high speed spindles, Proc. of the Inst. of Mech. Eng., Part C: Journal of Mechanical Engineering Science, 095440621663934, 2016.
• Wang X., Xu Q., Wang B., Zhang L., Yang H., and Peng Z., Effects of surface waviness on the static performance of aerostatic journal bearing, Tribology International, 103, 394-405, 2016.
• Wang C., Yau H., Theoretical analysis of high speed spindle air bearings by a hybrid numerical method, Applied Mathematics and Computation, 217 (5), 2084-2096, 2010.
• Bilgili M., and Sivrioğlu M., Pem Yakıt Pilinin Değişik Membran Elektrot Çifti Kalınlıklarında Ve Farklı Çalışma Basıncı Koşullarında Üç Boyutlu Sayısal Analizi-3d Numerıcal Analysıs Of Pem Fuel Cell At Dıfferent Mea Thıcknesses And Operatıng Pressure Condıtıons, Gazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi / Journal of the Faculty of Engineering & Architecture of Gazi University, 31 (1), 51-63, 2016.
• Chang S.H., Chan, C.W. and Jeng, Y.R., Numerical analysis of discharge coefficients in aerostatic bearings with orifice-type restrictors, Tribology International, 90 (October 2015),157-163, 2015.
• Czolczynski, K., “Rotordynamics of Gas-Lubricated Journal Bearing Systems”, Ling, F. F., Winer, W. O., Springer, NewYork, 1-48 (1999).
• Piekos E. S., Numerical Simulation of Gas- Lubricated Journal Bearings For Microfabricated Machines, PhD. Thesis, Department of Aeronautics and Astronautics Massachusetts Instıtute Of Technology, Boston, 15-108, 2000.
• Wang C. Application of a hybrid method to the nonlinear dynamic analysis of a flexible rotor supported by a spherical gas-lubricated bearing system, Nonlinear Analysis:theory, Method & Applications,70 (5), 2035-2053, 2009.
• Lo Y., Wang C.C., Lee Y.H., Performance analysis of high-speed spindle aerostatic bearings, Tribology International, 38 (1), 5-14, 2005.
• Chen Y.S., Chiu C.C., Cheng Y.D., Influence of operational conditions and geometric parameters on stifnness of aerostatic journal bearings, Precision Engineering, 34 (4), 722-734, 2010.
• Zhang W-M., Zhou J-B., Meng G., Performance and stability analysis of gas lubricated journal bearings in MEMS, Tribology International, 44 (7), 887-897, 2011.
• Li Y., Zhou K., Zhang Z., A flow difference feedback iteration method and its application to high-speed aerostatic journal bearings, Tribology International, 84 (Apr. 2015), 132-141, 2015.
• Haentjens T., Hout K., Alternating direction implicit finite difference schemes for the Heston–Hull–White partial differential equation, The Journal of Computational Finance, 16 (1), 83-110, 2012.
• Dal A., Basınçlı hava yatağıyla desteklenmiş yatak-rotor sisteminin dinamik karakteristiklerinin belirlenmesi, Yüksek Lisans Tezi, Gazi Üniversitesi, Fen Bilimleri Enstitüsü, Ankara, 126-128, 2014.
• Chapra S.C., Canale, P.R., Numerical Methods for Engineers, McGraw-Hill, 3th Edition, 832-848, 1988.
• Viktorov V., Belforte G., Raparelli T., Modeling and identification of gas journal bearings: externally pressurized gas bearing results, Journal of Tribology, 127 (3), 548-556, 2005.
• Karaçay T., Basınçlı Hava Yataklı Rotor Dinamiğinin Teorik ve Deneysel İncelenmesi, Sonuç Raporu, ARDEB-1001-112M847, TUBİTAK, (2015)
• Dal A., Karaçay T., On the Numerical and Experimental Analysis of Internal Pressure in Air Bearings, International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 9 (7), 1232-1237, 2015.
• Dal A., Karaçay T., On Dynamics of an Externally Pressurized Air Bearing with High Values of Clearance: Effect of Mass Flow Rate, Proceedings of the World Congress on Engineering, Vol-II, London-U.K., 3-6 July, 2014.
• Dal A., Karaçay T., Vıbratıon Of Two Degrees Of Freedom Aır Bearıng rotor System Wıth Asymmetrıc Supply Pressure, International Conference on Engineering Vibration, Ljubljana-Slovenia, 519-528, 7-10 September, 2015
• Otsu Y., Somaya K., Yoshimoto S., High-speed stability of a rigid rotor supported by aerostatic journal bearings with compound restrictors, Tribology International, 44 (1), 9-17, 2011.
• .