___

• Yükler, İ., “Çok Pasolu Köşe Kaynaklarında
• Çatlamalar”, Böhler Kaynak Dünyası, 9-10, 1998.
• Külekçi, M.K., ve Ertürk, İ., “Kaynaklı Yapılarda
• Çekme ve Çarpılmalar”, Kaynak Teknolojisi I.
• Ulusal Kongresi, Ankara, 179-189, 1997.
• Anık, S., Tülbentçi, K., ve Kaluç, E., “Örtülü
• Elektrot İle Ark Kaynağı”, İstanbul, 1991.
• Michaleris, P., Dantzig, J., Tortorelli, D.,
• “Minimization of Welding Residual Stress and
• Distortion in Large Structures”, Welding
• Journal, 78, 11, 361-366, 1999.
• Deo, M.V., Michaleris, P., “Mitigation Welding
• Induced Buckling Distortion Using Transient
• Thermal Tensioning”, Science and Technology
• of Welding and Joining, 1-17, 2002.
• Hackmair, C., Werner, E., Ponisch, M., “Application
• of Welding Simulation for Chassis Components
• within the Development of Manufacturing Methods”,
• Computational Materials Science, 28, 540-547, 2003.
• Liang Teng, T., Hsiang Chang, P., Cheng Tseng,
• W., “Effect of Welding Sequences on Residual
• Stresses”, Computers and Structures, 81, 273-
• , 2003.
• Tsai, C.L., Park, S.C., Cheng, W.T., “Welding
• Distortion of a Thin-Plate Panel Structure”,
• Welding Research Supplement, 156-165, 1999.
• Voutchkov, I., Keane, A.J., Bhaskar, A., Olsen,
• T.M., “Weld Sequence Optimization:The Use of
• Surrogate Models for Solving Sequential Combinatorial
• Problems”, Computer Methods Application
• Mechanical Engineering, 194, 3535-3551, 2005.
• Bachorski, A., Painter, M.J., Smailes, A.J., Wahab,
• M.A., “Finite-Element Prediction of Distortion
• During Gas Metal Arc Welding Using the
• Shrinkage Volume Approach”, Journal of Materials
• Processing Technology, 92-93, 405-409, 1999.
• Tseng, K.H., Chou, C.P., “The Study of Nitrogen in
• Argon Gas on the Angular Distortion of Austenitic
• Stainless Steel Weldments”, Journal of Materials
• Processing Technology, 142, 139-144, 2003.
• Measurements Group, “Strain Gage
• Temperature Effects”, TN-504-1, USA, 1989.
• TML, “Strain Gauges”, TML Pam E-101P,
• Tokyo Sokki Kenkyujo Co., Ltd.