___

• Zhang, S.H., Danckert, J.; “Development of
• hydro-mechanical deep drawing”, Journal of
• Materials Processing Technology, 83, 14-25,
• -
• Lang, L., Danckert, J., Nielsen, K.B., Zhou, X.;
• “Investigation into the forming of a complex cup
• locally constrained by a round die based on an
• innovative hydromechanical deep drawing
• method”, Journal of Materials Processing
• Technology, 167, 191-200, 2005.
• Lang, L.H., Danckert, J., Nielsen, K.B.;
• “Investigation into the effect of pre-bulging
• during hydromechanical deep drawing with
• uniform pressure onto the blank”, International
• Journal of Machine Tools & Manufacture, 44,
• –657, 2004.
• Zhang, S.H., Nielsen, K. B., Danckert, J., Kang,
• D.C., Lang, L.H., “Finite element analysis of the
• hydromechanical deep-drawing process of
• tapered rectangular boxes”, Journal of Materials
• Processing Technology, 102, 1-8, 2000.
• Tschaetsch H.; “Metal Forming Practice”,
• Springer-Verlag Berlin Heidelberg, Germany,
• -184, 2006.
• Dachang, K., Yu, C., Yongchao, X.;
• “Hydromechanical deep drawing of superalloy cups”, Journal of Materials Processing
• Technology, 166, 243-246, 2005.
• Zhang, S.H., Lang, L.H., Kang, D.C., Danckert,
• J., Nielsen, K.B.; “Hydromechanical deepdrawing
• of aluminium parabolic workpiecesexperiments
• and numerical simulation”,
• International Journal of Machine Tools &
• Manufacture, 40, 1479-1492, 2000.
• Qin,Y., Balendra, R.; “Design considerations for
• hydromechanical deep drawing of sheet
• components with concave features”, Journal of
• Materials Processing Technology, 145, 163–
• , 2004.
• Zhang, S.H., Jensen, M.R., Nielsen, K.B.,
• Danckert, J., Lang, L.H.; Kang, D.C., “Effect of
• anisotropy and prebulging on hydromechanical
• deep drawing of mild steel cups”, Journal of
• Materials Processing Technology, 142, 544–
• , 2003.
• Hezam, L.M.A., Hassan, M.A., Hassab-Allah,
• I.M., El-Sebaie, M.G., “Development of a new
• process for producing deep square cups through
• conical dies”, International Journal of Machine
• Tools & Manufacture, 49, 773-780, 2009.
• Khandeparkar, T., Liewald, M.;
• “Hydromechanical deep drawing of cups with
• stepped geometries”, Journal of Materials
• Processing Technology, 202, 246-254, 2008.
• Karaağaç, İ., Özdemir, A.; “The formability of
• Erdemir 6112 sheet metal by the
• hydromechanical deep drawing process”,
• Journal of The Faculty of Engineering and
• Architecture of Gazi University, 26:4, 841-850,
• -
• Bergkvist M.; “Fluid Cell Pressing in The
• Aerospace Industry”; Hydroforming For
• Advanced Manufacturing, Edited: Koç, M.,
• Woodhead Publishing Limited and CRC Press
• LLC, England, 315-334, 2008.
• “Metal Forming Handbook – Schuler
• GmbH”, Edited: Altan T., Springer, Germany,
• -168, 1998.
• Karaağaç, İ. Özdemir A.; “The Experimental
• investigation of sheet metal hydroforming
• process parameters”, Ph.D. Thesis Gazi
• University, Institute of Science and Technology,
• -