___

• Anonim, Çelik Ucuna Su Verilerek Sertleşebilirlik
• Deneyi (Jominy deneyi), TS 1381 EN ISO 642
• (ICS 77.040.99), TSE 15s., Ankara, 2001.
• Smoljan B., Numerical Simulation of Steel
• Quenching, Journal of Materials Engineering
• and Performance, Volume 11, No 1, 75-79,
• -
• Yazdi, A. Z., Sajjadi, S. A., Zebarjad, S. M.,
• Nezhad, S. M. M., Prediction of Hardness At
• Different Points of Jominy Specimen Using
• Quench Factor Analysis Method, Journal of
• Materials Processing Technology, 11134, 1-6,
• -
• Çakır M., Özsoy A., Investigation of the
• Correlation between Thermal Properties and
• Hardenability of Jominy Bars Quenched with Air–
• water Mixture for AISI 1050 Steel, Material and
• Design, Volume 32, Issue 5, 3099-3015, 2011.
• Masson, P. L., Loulou, T., Artioukhine, E.,
• Comparıson between Two Methods For
• Estimating the Convection Heat Transfer
• Coefficient Durıng A Metallurgical Jominy End-
• Quench Test, 4th International Conference on
• Inverse Problems in Engineering, Rio de
• Janeiro, Brezilya, 2002.
• Smoljan B., Prediction of Mechanical Properties
• and Microstructure Distribution of Quenched and
• Tempered Steel Shaft, Journal of Materials
• Processing Technology, 175, 393–397, 2006.
• Masson P.L., Loulou T., Artioukhine, E., Rogeon
• P., Carron D., Quemener J. J., A Numerical Study
• for the Estimation of a Convection Heat Transfer
• Coefficient During a Metallurgical Jominy End-
• Quench Test, International Journal of Thermal
• Sciences, Volume 41, 517-527, 2002.
• Çakır M., 2008. Su Verme Isıl İşleminde Çelik-
• Ortam Arasındaki Isı Transferinin
• İncelenmesi, Yüksek Lisans Tezi, Süleyman
• Demirel Üniversitesi, Fen Bilimleri Enstitüsü,
• -
• Incropera F. P., DeWitt D. P., Fundamentals of
• Heat and Mass Transfer, (4th ed.), New York,
• -
• Gülenç, B., M.K.E. Kurumu Çeliklerinin
• Sertleşebilirliklerinin Tayini, Yüksek Lisans
• Tezi, Gazi Üniversitesi, Fen Bilimleri Enstitüsü,
• -