___

• Hallam, C. B. ve Ollerton, E., “Thermal stresses in
• axially connected circular cylinders”, Journal of
• Strain Analysis, 8, 160-167, 1973.
• Stanley, P. ve Chan, W. K., “The application of
• thermoelastic stress analysis techniques to
• composite materials”, Journal of Strain
• Analysis, 23, 137-143, 1988.
• Lee, Z.-Y., Chen, C.K. ve Hung, C.-I., “Transient
• thermal stress analysis of multilayered hollow
• cylinder”, Acta Mechanica, 151, 75-88, 2001.
• Orçan, Y. ve Gamer, U., “Elastic-plastic
• deformation of a centrally heated cylinder”, Acta
• Mechanica, 90, 61-80, 1991.
• Orçan, Y., “Thermal-stresses in a heat generating
• elastic-plastic cylinder with free ends”,
• International Journal of Engineering Science,
• , 883-898, 1994.
• Gülgeç, M., “Influence of the temperature
• dependence of the yield stress on the stress
• distribution in a heat generating elastic-plastic
• cylinder”, Zeitschrift fur Angewandte
• Mathematik und Mechanic, 1999, 79, 210-216.
• Gülgeç, M. ve Orçan, Y., “Elastic-plastic
• deformation of a heat generating tube with
• temperature-dependent yield stress”,
• International Journal of Engineering Science,
• , 89-106, 2000.
• Orçan, Y. ve Gülgeç, M., “Influence of the
• temperature dependence of the yield stress on the
• stress distribution in a heat-generating tube with
• free ends”, Journal of Thermal Stresses, 23,
• -547, 2000.
• Lee, S., Wang, W.L. ve Chen, J.R., “Diffusioninduced
• stresses in a hollow cylinder”,
• Materials Science and Engineering A, 285,
• –194, 2000.
• Orçan, Y. ve Eraslan, A. N., “Thermal stresses
• in elastic-plastic tubes with temperaturedependent
• mechanical and thermal properties”,
• Journal of Thermal Stresses, 24, 1097-1113,
• -
• Gülgeç, M.,“Thermal Stress Analysis of a Free-
• End Cylinder Having a Temperature Dependent
• Yield Stress Subjected to Transient Radial
• Temperature Distribution”, Journal of the
• Faculty of Engineering and Architecture of
• Gazi University, Vol 17, No 2, 25-34, 2002.
• Gülgeç, M.,“Elastic-Plastic Analysis of a
• Cylinder Having Temperature Dependent Yield
• Stress with Rigid Casing”, Journal of the
• Faculty of Engineering and Architecture of
• Gazi University, Vol 18, No 3, 85-96, 2003.
• Eraslan, A.N., “Thermally Induced
• Deformations of Composite Tubes Subjected to
• a Nonuniform Heat Source”, Journal of
• Thermal Stresses, 26, 167-193, 2003.
• Eraslan, A.N., Şener, E. ve Argeso, H., “Stress
• Distribution in Energy Generating Two-layer
• Tubes Subjected to Free and Radially
• Constrained Boundary Conditions”,
• International Journal of Mechanical Sciences,
• , 469–496, 2003.
• Chao, C.K., Chuang, C.T. ve Chang, R.C.,
• “Thermal stresses in a viscoelastic three-phase
• composite cylinder”, Theoretical and Applied
• Fracture Mechanics, 48, 258–268, 2007.
• Irfan, M. A. ve Chapman, W., “Thermal stresses
• in radiant tubes due to axial, circumferential and
• radial temperature distributions”, Applied
• Thermal Engineering, 29, 1913–1920, 2009.
• Bîrsan, M., “Thermal stresses in cylindrical
• Cosserat elastic shells”, European Journal of
• Mechanics A/Solids, 28, 94–101, 2009.
• Shao, Z.S., Fan, L.F. ve Ma, G.W., “Theoretical
• investigation on thermo-mechanical stresses in
• laminated cylindrical panels”, Journal of
• Thermoplastic Composite Materials, 23, 111-
• , 2010.
• Tsukrov, I. ve Drach, B., “Elastic deformation
• of composite cylinders with cylindrically
• orthotropic layers”, International Journal of
• Solids and Structures, 47, 25–33, 2010.
• Incropera, F.P. ve De Witt, D.P., Fundamentals
• of Heat and Mass Transfer, 2. Baskı, John
• Wiley & Sons, New York, A.B.D., 1985.
• Öztürk, A., Ortasından Isıtılan İki Ucu Sabit
• Kompozit Silindirde Elastik-Plastik Gerilme
• Analizi, Yüksek Lisans Tezi, Gazi Üniversitesi,
• Fen Bilimleri Enstitüsü, 2001.