___

• Contreras, M., Jiménez-Morales, A., Torralba,
• J.M., “Influence Of Particle Size Distribution
• And Chemical Composition Of The Powder On
• Final Properties Of Inconel 718 Fabricated By
• Metal Injection Moulding (Mim), PIM
• International, 4: 1, 67-70, 2010.
• Klöden, B., Jehring, U., Weißgärber, T., Kieback,
• B., Langer, I., Ralf W.-E. Stein, “High
• Temperature Properties of MIM-Processed
• Superalloys”, Powder Injection Moulding-
• Superalloys & Composites- PM2010 World
• Congress, Floransa, İtalya, 2010.
• Cheng, L.H.,Hwang, K.S., Fan, Y.L. “Molding
• Properties and Causes of deterioration of
• Recycled Powder Injection Molding Feedstock”,
• Metallurgical And Materials Transactions A,
• – 3216, 2009.
• German, RM, Bose A. “Injection moulding of
• metals and ceramics”, Metal Powder Industries
• Federation. NJ: Princeton; 1997.
• Youhua, H., Yimin, L., Hao,H., Jia, L., Xiao, T.
• “Preparation and Mechanical Properties of
• Inconel718 Alloy by Metal Injection Molding”,
• Rare Metal Materials and Engineering, 39: 5,
• -780, 2010.
• Julien, B., Després, M. “Metal Injection
• Moulding: A Near Net Shape Fabrication Method
• for the Manufacture of Turbine Engine
• Component.” In Cost Effective Manufacture
• via Net-Shape Processing, 8-1, 2006.
• Valencia, J.J.,McCabe, T., Hens, K., Hansen,
• J.O., Bose, A., , “Microstructure and Mechanical
• Properties of Inconel 625 and 718 Alloys
• Processed by Powder Injection Molding”,
• Superalloys 718, 625, 706 and Various Derivatives, ed. E.A. Loria, The Minerals,
• Metals & Materials Society, 935 – 945, 1994.
• Johnson, J. L., Tan, L.K., Suri, P.,German, R.M.,
• “Mechanıcal Propertıes And Corrosıon
• Resıstance Of Mım Nı-Based Superalloys”,
• Advances in Powder Metallurgy&Particulate
• Materials 2004, Part4, Princeton: Metal Powder
• Industries Federation, 89-101, 2004.
• Auzène,D.,“Investigations into water soluble
• binder systems for Powder Injection Moulding”
• PIM International, 5:1, 51-54, 2011.
• Karatas, Ç., Sözen, A., Arcaklioglu, E., Erguney,
• S., “Investigation of mouldability for feedstocks
• used powder injection moulding” Materials and
• Design 29, 1713–1724, 2008.
• Urtekin, L., “Toz Enjeksiyon Kalıplanmış Steatit
• Seramiklerin Özelliklerine Kalıplama ve
• Sinterleme Parametrelerinin Etkisinin
• İncelenmesi ”Doktora Tezi, Gazi Üniversitesi
• Fen Bilimleri Enstitüsü, 45-86, 99, 2008.
• Karataş, Ç., Sarıtaş, S., “Toz Enjeksiyon
• Kalıplama : Bir Yüksek Teknoloji İmalat
• Metodu”, Journal of Faculty of Engineering
• and Architecture of Gazi University., 13:2,
• , 1998.
• German, R.M., “Powder Injection Molding”,
• New Jersey, USA, 1-225, 1990.
• German, M.R., “Powder Injection Molding”,
• Metal Powder Industries Federation, USA, 219-
• , 1990.
• Karataş, Ç., “Toz Enjeksiyon Kalıplamada
• Karışımın Reolojisi”, Doktora Tezi, Gazi
• Üniversitesi Fen Bilimler Enstitüsü, Ankara,
• -85, 1997.
• Porter, M.A., “ Effects of Binder Systems for
• Metal Injection Moulding”, Master’s Thesis,
• MSc Programmes in Engineering, Lulea
• University of Technology, 6-55, 2003.
• Urtekin, L., Uslan, İ., Tuç, B., “ Steatitin
• enjeksiyon kalıplana bilirliğine besleme stok
• reolojilerinin etkisinin araştırılması”, Journal of
• Faculty of Engineering and Architecture of
• Gazi University, 27:2, 333-341, 2012.
• Sotomayor, M.E., Várez, A., Levenfeld, B.,
• “Influence of powder particle size distribution on
• rheological properties of 316L powder injection moulding feedstocks”, Powder Technology 200,
• -36, 2010.
• Karataş, C., Kocer, A., Ünal, H.I., Saritaş, S.,
• “Rheological properties of feedstocks prepared
• with steatite powder and polyethylene-based
• thermoplastic binders”, Journal of Materials
• Processing Technology, 152: 77-83, 2004.
• Huang, B., Liang, S., Qu, X., “ The rheology of
• metal injection molding”, Journal of Materials
• Processing Technology 137, 132-137, 2003.
• Hidalgo, J.,Contreras, J.M., Baile, B., Jiménez-
• Morales, A., Torralba, J. M. “Rheological and
• Thermal Behavior Of Powder Injection Moulding
• (PIM) Feedstocks Fabricated with Binder
• Systems Based On Waxes”, PM2010 World
• Congress-Powder Injection Moulding:
• Feedstock Materials, Floransa, İtalya, 2010.
• Sotomayor, M.E., Levenfeld, B., Várez, A.,
• “Powder Injectıon Mouldıng of Premıxed Ferrıtıc
• and Austenıtıc Staınless Steel Powders”,
• Materials Science&Engineering A, 528: 9,
• -3488, 2011.
• Raza, M.R., Ahmad, F., Omar, M.A., German,
• R.M., “Binder Removal from Powder Injection
• Molded 316L Stainless Steel”, Journal of
• Applied Science 11, 2042 – 2047, 2011.
• Yang W.W., Yang K.Y., Hon H.H., “Effect of
• PEG molecular weight on rheological behaviour
• of alumina injection molding feedstock”,
• Materials Chemistry and Physics, 78, 416-424,
• -
• Shibo G., Xuanhui Q., Xinbo H., Ting Z.,
• Bohuave D., “Powder injection molding of Ti–
• Al–4Valloy”, Journal of Materials Processing
• Technology, 173:3, 310-314, 2006.
• Li, D.,Hou, H., Tan, Z., Lee, K., “Metal injection
• molding of pure molybdenum” Advanced
• PowderTechnology 20, 480–487, 2009.
• Ibrahim, R., Azmirruddin, M., Jabir, M., Johari,
• N., Muhamad, M., Talib, A. R. A., “Injection
• Molding of Inconel 718 Parts for Aerospace
• Application Using Novel Binder System Based
• on Palm Oil Derivatives”, World Academy of
• Science, Engineering and Technology 70, 526-
• , 2012.