___

• Danacı M.A., Birgören B. ve Ersöz S., “Weibull
• Parametreleri ve Yüzdelikleri İçin Güven Aralığı
• Tahmin Algoritmaları”, Gazi Üniv. Müh. Mim.
• Fak. Der., cilt 24, no1, 119-128, 2009.
• Wang P. and Coit D. W., “Repairable Systems
• Reliability Trend Tests and Evaluation”, Annual
• Reliability and Maintainability Symposium,
• pp.416-421, 2005.
• Rao K.R.M. and Prasad P.V.N., “Graphical
• Methods for Reliability of Repairable Equipment
• and Maintenance Planning”, Annual Reliability
• and Maintainability Symposium, pp.123-128,
• -
• Chen, Z., “Bayesian and Emprical Bayes
• Approaches to Power Law Process and
• Microarray”, Ph. D. Thesis,
• http://etd.fcla.edu/SF/SFE0000430/DISSER~1.pd
• f, 2004.
• Kumar, U., “Availability Studies of Load-Haul-
• Dump Machines”, Proceedings of the 21th
• APCOM Symposium, Las Vegas, pp. 323-335,
• -
• Kumar, D. and Vagenas, N., Performance
• Evaluation of A Load-Haul-Dump Vehicle, CIM
• Bulletin, 86(974), pp. 39-42, 1993.
• Paraszczak, J. and Perreault, J.F., “Reliability of
• Diesel Powered Load-Haul-Dump Machines in
• an Underground Quebec Mine”, CIM Bulletin,
• (978), pp. 123-127, 1994.
• Hall, R.A. and Daneshmend, L.K., “Reliability
• and Maintainability Models for Mobile
• Underground Haulage Equipment”, CIM
• Bulletin, 96(1072), pp.159-165, 2003a.
• Hall, R.A. and Daneshmend, L.K., “Reliability
• Modeling of Surface Mining Equipment: Data
• Gathering and Analysis Methodologies”,
• International Journal of Surface Mining,
• Reclamation and Environment, 17(3), pp.139-
• , 2003b.
• Lhorente B., Lugtigheid D., Knights P.F. and
• Santana A., “A Model for Optimal Armature
• Maintenance in Electric Haul Truck Wheel
• Motors: A Case Study”, Reliability Engineering
• and System Safety, vol.84, pp. 209-218, 2004.
• Barabady J. and Kumar U., “Reliability
• characteristics Based Maintenance Scheduling: A
• Case Study of a Crushing Plant”, International
• Journal of Performability Engineering, Vol. 3,
• No.3, pp. 319-328, 2007.
• Elevli S., Uzgören N. and Taksuk M.,
• “Maintainability Analysis of Mechanical Systems
• of Electric Cable Shovels”, Journal of Scientific
• & Industrial Research, 67(4), pp. 267-271,
• -
• Gupta S., Maiti J., Kumar R. and Kumar U., “A
• Control Chart Guided Maintenance Policy
• Selection”, International Journal of Mining,
• Reclamation and Environment, 23(3), pp. 216-
• , 2009.
• Vayenas N. and Wu X., Maintenance and
• Reliability Analysis of A Fleet of Load-Haul-
• Dump Vehicles in an Underground Hard Rock
• Mine, International Journal of Mining,
• Reclamation and Environment, 23(3), pp. 227-
• , 2009.
• Kumar, U. and Klefsjö, B., “Reliability Analysis
• of Hydraulic Systems of LHD Machines Using
• The Power Law Process Model”, Reliability
• Engineering and System Safety, vol. 35, pp.
• -224, 1992.
• Majumdar S.K., “Study on Reliability Modeling
• of A Hydraulic Excavator System”, Quality and
• Reliability Engineering International, vol.11,
• pp. 49-63, 1995.
• Pulcini G., “Modeling The Failure Data of A
• Repairable Equipment With Bathtub Type Failure
• Intensity”, Reliability Engineering and System
• Safety, vol. 71, pp. 209-218, 2001.
• Louit D.M., Pascual R. and Jardine A.K.S., “A
• Practical Procedure for The Selection of Time-
• To-Failure Models Based on The Assessment of
• Trends in Maintenance Data”, Reliability
• Engineering & System Safety, 94(10), pp. 1618-
• , 2009.
• Samanta, B., Sarkar, B. and Mukherjee, S.K.,
• “Reliability Analysis of Shovel Machines Used in
• An Open Cast Coal Mine”, Mineral Resources
• Engineering, 10(2), pp. 219-231, 2001.
• Barabady J. and Kumar U., “Reliability and
• Maintainability Analysis of Crushing Plants in
• Jajarm Bauxite Mine of Iran”, Proceedings of
• the Annual Reliability and Maintainability
• Symposium, pp. 109-115, 2005.
• Vagenas, N., Runciman, N. and Clement, S.R.,
• “A Methodology for Maintenance Analysis of
• Mining Equipment”, International Journal of
• Surface Mining, Reclamation and
• Environment, vol.11, pp. 33-40, 1997.
• Barabady J. and Kumar U., “Reliability Analysis
• of Mining Equipment: A Case Study of A
• Crushing Plant At The Jajarm Bauxite Mine of
• Iran”, Journal of Reliability Engineering and
• System Safety, Vol. 93, No.4, pp. 647-653, 2008.
• Rothbart H A., "Reliability", Mechanical
• Design& Systems Handbook, McGraw-Hill Inc.
• p. 20.1-20.12, 1986.
• Jones R B., Risk Based Management: A
• Reliability Centered Approach, Gulf Publishing
• Company. p. 26-68, 1995.
• Ryan K.J., “Some Flexible Families of Intensities
• for Non-Homogeneous Poisson Process Models
• and Their Bayes Inference”, Qual. Reliab.
• Engng. Int. 19, 171–181, 2003.
• DOD, “Department of Defense Guide For
• Achieving Reliability, Availability, and
• Maintainability”,
• http://www.acq.osd.mil/sse/docs/RAM_Guide_08
• pdf, 2005.
• Özmen A., Zaman Serisi analizinde Box Jenkins
• Yöntemi ve Banka Mevduat Tahmininde
• Uygulama Denemesi, T.C. Anadolu Üniversitesi
• Yayınları No:201, Eskişehir, 1986.
• Gujarati D. N., Temel Ekonometri, Literatür
• Yayıncılık, İstanbul, 1999,
• Cirrone G.A.P., Donadio S., Guatelli S., Mantero
• A., Mascialino B., Parlati S., Pia M.G., Pfeiffer
• A., Ribon A. And Viarengo P., “A Goodness-of-
• Fit Statistical Toolkit”, IEEE Transactions on
• Nuclear Science, Vol.51, No.5, pp. 2056-2063,
• -
• Du J., “Evaluation of Equipment Reliability,
• Availability, Maintainability in an OilSands
• Processing Plant”, M.Sc. Thesis, The University
• of British Columbia, 2008.
• Gaudoin O., Yang B. and Xie M., “A simple
• Goodness-of-Fit Test for the Power-Law Process
• Based on the Duane Plot”, IEEE Transaction on
• Reliability, Vol.52, No.1, pp. 69-74, 2003.
• Xie M., Yang B. And Gaudoin O., éRegression
• Goodness-Of-Fit Test for Software Reliability
• Model Validation,
• http://www.chillarege.com/fastabstracts/issre200
• /2001107.pdf, 2001.