___

• Youssef H.A., El-Hofy H., Machining
• Technology: Machine Tools and Operations,
• CRC Press, Taylor & Francis Group, 2008.
• Grzesik W., Advanced Machining Processes of
• Metallic Materials: Theory, Modeling and
• Applications, Amsterdam: Elsevier Science and
• Technology, 2008.
• Şahin, Y., Talaş Kaldırma Prensipleri I, Nobel
• Yayın Dağıtım Ltd. Şti., Ankara, 2000.
• Çakır, M.C., Modern Talaşlı İmalat Yöntemleri,
• Vipaş, Bursa, 2000.
• Rahman, M., Kumar, S.A., Salam, M.U.,
• “Evaluation of minimal quantities of lubricant in
• end milling”, International Journal of Advanced
• Manufacturing Technology, 18, 235–241, 2001.
• Obikawa, T., Kamata, Y., Shinozuka, J., “Highspeed
• grooving with applying MQL”,
• International Journal of Machine Tools and
• Manufacture, 46, 1854–1861, 2006.
• Tan, X.C., Liu F., Cao H.G, Zhang H., “A
• decision-making framework model of cutting fluid
• selection for green manufacturing and a case
• study”, Journal of Materials Processing
• Technology, 129, 467-470, 2002.
• Rahman, M., Kumar, S.A., Salam, M.U.,
• “Experimental evaluation on the effect of minimal
• quantities of lubricant in milling”, International
• Journal of Machine Tools and Manufacture,
• , 539–547, 2002.
• De Lacalle, L.L.N., Angulo, C., Lamikiz, A.,
• S´anchez, J.A., “Experimental and numerical
• investigation of the effect of spray cutting fluids in
• high speed milling”, Journal of Materials
• Processing Technology, 172(1), 11–15, 2006.
• Chern, G.L., “Experimental observation and
• analysis of burr formation mechanisms in face
• milling of aluminum alloys”, International
• Journal of Machine Tools and Manufacture,
• , 1517–1525, 2006.
• Diniz, A.E., Ferreira, J.R., Filho, F.T., “Influence
• of refrigeration/lubrication condition on SAE
• hardened steel turning at several cutting
• speeds”, International Journal of Machine
• Tools and Manufacture, 43, 317–326, 2003.
• Kishawy, H.A., Dumitrescu, M., Ng, E.G.,
• Elbestawi, M.A., “Effect of coolant strategy on
• tool performance, chip morphology and surface
• quality during high-speed machining of A356
• aluminum alloy”, International Journal of
• Machine Tools and Manufacture, 45, 219–227,
• -
• Itoigawa, F., Childs, T.H.C., Nakamura, T.,
• Belluco, W., “Effects and mechanisms in minimal
• quantity lubrication machining of an aluminum
• alloy”, Wear, 260, 339–344, 2006.
• Ezugwu, E.O., Bonney, J., Da Silva, R.B., Çakır,
• O., “Surface integrity of finished turned Ti–6Al–
• V alloy with PCD tools using conventional and
• high pressure coolant supplies”, International
• Journal of Machine Tools and Manufacture,
• , 884–891, 2007.
• Attanasio, A., Gelfi, M., Giardini, C., Remino, C.,
• “Minimal quantity lubrication in turning: Effect on
• tool wear”, Wear, 260, 333–338, 2006.
• Bruni, C., Forcellese, A., Gabrielli, F., Simoncini,
• M., “Effect of the lubrication-cooling technique,
• insert technology and machine bed material on the
• workpart surface finish and tool wear in finish
• turning of AISI 420B”, International Journal of
• Machine Tools and Manufacture, 46, 1547–
• , 2006.
• Liu, J., Han, R., Sun, Y., “Research on
• experiments and action mechanism with water
• vapor as coolant and lubricant in Green cutting”,
• International Journal of Machine Tools and
• Manufacture, 45, 687–694, 2005.
• Huseyinoğlu M., 7075 alüminyum alaşımının
• freze ile işlenmesinde Minimum soğutma sıvısı
• kullanmanın performans karakteristiklerine
• etkisi, Yüksek Lisans Tezi, Fırat Üniversitesi, Fen
• Bilimleri Enstitüsü, Elazığ, 2008.
• Pawade, R.S., Joshi, S.S., Brahmankar, P.K.,
• Rahman, M., “An investigations of cutting forces
• and surface damage in high-speed turning of
• inconel 718”, Journal of Materials Processing
• Technology,192-193,139-146, 2007.
• Davidson, M.J., Balasubramanian, K., Tagore,
• G.R.N., “Surface roughness prediction of flowformed
• AA 6061 alloy by design of experiments”,
• Journal of Materials Processing Technology,
• , 41-46, 2008.
• Ozben, T., Kilickap, E., Çakır, O., “Investigation
• of mechanical and machinability properties of SiC
• particle reinforced Al-MMC”, Journal of
• Materials Processing Technology, 198, 220-225,
• -
• Lalwani, D.I., Metha, N.K., Jain, P.K.,
• “Experimental investigations of cutting parameters
• influence on cutting forces and surface roughness
• in finish hard turning of MDN250 steel, Journal
• of Materials Processing Technology, 206 (1-3),
• -179, 2008.
• Shaw, M.C., Metal Cutting Principles, Oxford
• University Press, London, 1984.
• Korkut I., Korkut, I., Donertas, M.A. “The
• influence of feed rate and cutting speed on the
• cutting forces, surface roughness and tool–chip
• contact length during face milling”, Materials
• and Design, 28,308-312, 2007.
• Dhar, N.R., Kamruzzaman, M., Ahmed, M.,
• “Effect of minimum quantity lubrication (MQL)
• on tool wear and surface roughness in turning
• AISI-4340 steel”, Journal of Materials
• Processing Technology, 172, 299–304, 2006.
• Habalı K., Gökkaya H., “Kaplamasız sementit
• karbür kesici takımlarla takım-talaş ara yüzey
• sıcaklığının deneysel olarak araştırılması”,
• Pamukkale Üniversitesi, Mühendislik Bilimleri
• Dergisi, 11(1), 115-121, 2005.
• Gökkaya H., Sur G., Dilipak H., “PVD ve CVD
• kaplamalı sementit karbür kesici takımların işleme
• parametrelerine bağlı olarak yüzey pürüzlülüğüne
• etkisinin deneysel olarak incelenmesi”, Karabük
• Üniversitesi Teknoloji Dergisi, 7(3), 473-478,
• -
• Trent, E.M., Wright, P.K. Metal cutting, Fourth
• Edition, Butterwort-Heinemann, Woburn, MA,
• -