GERİ KAZANIMLI İMALAT SİSTEMLERİ İÇİN LOJİSTİK AĞI TASARIMI: LİTERATÜR ARAŞTIRMASI

Son zamanlarda firmalar; ekonomik ve ekolojik sebepler, hükümetlerin koydukları kanunlar, sosyalsorumluluklar gibi nedenlerden dolayı tersine akışı sistemlerine dâhil etmektedirler. Bu firmalar, etkin bir tersine lojistik ağının tasarlanması ve malzeme, parça ve ürünlerin tersine akışının etkin bir şekilde yönetilmesi gibi problemlerle karşı karşıya kalmaktadır. Genel bir tersine lojistik ağı tüketicilerden kullanılmış ürünlerin toplanması, depolanması, yeniden işlenmesi ve geri dağıtılması faaliyetlerini içerir. Bu çalışmada tersine lojistik ağı tasarımı ve modellenmesi konusunda yapılmış olan çalışmalar incelenmiş, sınıflandırılmış ve temel özellikleri analiz edilmeye çalışılmıştır.

___

  • Dowlatshahi, S., “A strategic framework for the
  • design and implementation of remanufacturing
  • operations in reverse logistics”, International
  • Journal of Production Research, Cilt 43, No
  • , 3455–3480, 2005.
  • Fleischmann M., Beullens, P., Bloemhof-
  • Ruwaard, J.M., van Wassenhove, L.N., “The
  • Impact of Product Recovery on Logistics
  • Network Design”, Production and Operations
  • Management, Cilt 10, No 2, 156, 2001.
  • Fleischmann, M., Bloemhof-Ruwaard, J.M.,
  • Dekker, R., van der Laan, E., van Nunen,
  • J.A.E.E. And van Wassenhove, L.N.,
  • “Quantitative models for reverse logistics: a
  • review (Invited Review)”, European Journal of
  • Operational Research, Cilt 103, No 1, 1-17,
  • -
  • Hillegersberg, J., Zuidwijk, R., Nunen, J., Eijk,
  • D., “Supporting Return Flows in the Supply
  • Chain”, Communications of the ACM, Cilt 44,
  • No 6, 74-79, 2001.
  • Gungor, A. ve Gupta, S.M., “Issues in
  • environmentally conscious manufacturing and
  • product recovery: A survey”, Computers and
  • Industrial Engineering, Cilt 36, No 4, 811-853,
  • -
  • Lourenço, H.R., Soto, J.P., Institul D’estudis
  • Territorials, Publications-Document de treball,
  • www.ietcat.org, “Reverse logistics models and
  • applications: A recoverable production planning
  • model”, 2002.
  • Tibben-Lemke, R.S. ve Rogers, D.S.
  • “Differences Between Forward and Reverse
  • Logistics in a Retail Environment”, Supply Chain
  • Management: An International Journal, Cilt 7, No
  • , 271-282, 2002.
  • Lu, Z., Bostel, N., Dejax, P., “Simple Plant
  • Location Problem with Reverse Flow”, Supply
  • Chain Optimisation Product/Process Design,
  • Facility Location and Flow Control, Cilt 94,
  • Panos M. Pardalos, Donald W. Hearn (Editors),
  • -166, 2005.
  • Kroon, L. ve Vrijens, G., “Returnable Containers:
  • An Example of Reverse Logistics”,
  • International Journal of Physical Distribution
  • and Logistics Management, Cilt 25, No 2, 56-
  • , 1995.
  • Krikke, H.R., van Harten, A., Schuur, P.C.,
  • “Business Case Oce: Reverse Logistic Network
  • Redesign for Copiers”, OR Spectrum, Cilt 21,
  • No 3, 381-409, 1999.
  • Barros A.I., Dekker R., Scholten V.A., “A Twolevel
  • Network for Recycling Sand: A Case
  • Study”, European Journal of Operational
  • Research,Cilt 110, 199–214, 1998.
  • Jayaraman V., Guide Jr. V.D.R., Srivastava R.,
  • “A Closedloop Logistics Model for
  • Remanufacturing”, Journal of the Operational
  • Research Society, Cilt 50, 497–508, 1999.
  • Ko, H.J. ve Evans, G.W., “A Generic Algorithmbased
  • Heuristic for the Dynamic Integrated
  • Forward/Reverse Logistics Network for 3PL’s”,
  • Computers and Operations Research, Cilt 34,
  • -366, 2007.
  • Kusumastuti, R.D., Piplani, R., Lim, G.H., “An
  • Approach to Design Revese Logistics Networks
  • for Product Recovery”, Engineering
  • Management Conference, 2004 IEEE
  • ınternational, Cilt 3, 1239- 1243, 2004.
  • Lieckens, K. ve Vandaele, N., “Reverse Logistics
  • Network Design with Stochastic Lead Times”,
  • Computers and Operations Research, Cilt 34,
  • -416, 2007.
  • Thierry M.C., An Analysis of the Impact of
  • Product Recovery Management on
  • Manufacturing Companies, Doktora Tezi,
  • Erasmus University, Rotterdam, 1997.
  • Louwers, D., Kip, B.J., Peters, E., Souren, F.,
  • Flapper, S.D.P., “A Facility Location Allocation
  • Model for Reusing Carpet Material”, Computers
  • and Industrial Engineering, Cilt 36, No 4, 855–
  • , 1999.
  • Du, F. ve Evans G.W., “A Bi-objective Reverse
  • Logistics Network Analysis for Post-sale
  • Service”, Computers and Operations
  • Research, Cilt 35, 2617-2634, 2008.
  • Pati, R.K., Vrat, P., Kumar, P., “A Goal
  • Programming Model for Paper Recycling
  • System”, Omega, Cilt 36, 405- 417, 2008.
  • Demirel Özgün N. ve Gökçen H., “A Mixed
  • Integer Programming Model for
  • Remanufacturing in Reverse Logistics
  • Environment”, International Journal of
  • Advanced Manufacturing Technology,
  • baskıda, 2008.
  • Beamon, B.M. ve Fernandes, C., “Supply-Chain
  • Network Configuration For Product Recovery”,
  • Production Planning and Control, Cilt 15, No
  • , 270-281, 2004.
  • Jayaraman, V., Patterson, R.A., Rolland, E., “The
  • Design of Reverse Distribution Networks:
  • Models and Solution Procedures”, European
  • Journal of Operational Research, Cilt 150, No
  • , 128-149, 2003.
  • Lu, Z., Bostel, N., “A Facility Location Model
  • for Logistics Systems Including Reverse Flows:
  • The Case of Remanufacturing Activities”,
  • Computers and Operations Research, Cilt 34,
  • -323, 2007.
  • Spengler T., Püchert H., Penkuhn T., Rentz O.,
  • “Environmental Integrated Production and
  • Recycling Management”, European Journal of
  • Operational Research, Cilt 97, 308-326, 1997.
  • Salema M.I.G., Barbosa-Povoa, A.P., Novais,
  • A.Q., “An Optimization Model for the Design of
  • a Capacitated Multi-product Reverse Logistics
  • Network with Uncertainty”, European Journal
  • of Operational Research, Cilt 179, 1063-1077,
  • -
  • Lee, D.H. ve Dong, M., “A Heuristic Approach
  • to Logistics Network Design for End-of-lease
  • Computer Products Recovery”, Transportation
  • Research Part E, baskıda, 2007.
  • Assavapoke, T., Wayuparb, P., Yao, H., “Reverse
  • Logistics Network Design for Electronic Products
  • in the State of Texas”, Technical Report at the
  • University of. Houston, September 2006.
  • Chouinard, M., D’Amours, S., Ait-Kadi, D.,
  • “Design of Reverse Logistics Networks for
  • Multiproducts, Multistates, and Multiprocessing
  • Alternatives”, Trends in Supply Chain Design
  • and Management, Springer, London, 2007.
  • Listeş, o. ve Dekker, R., “A Stochastic Approach
  • to a Case Study for Product Recovery Network
  • Design”, European Journal of Operational
  • Research, Cilt160, 268-287, 2005.
  • Listeş, O., “A Generic Stochastic Model for
  • Supply-and-Return Network Design”,
  • Computers and Operations Research, Cilt 34,
  • -442, 2007.
  • Berger T. ve Debaillie B., Location of
  • disassembly centres for re-use to extend an
  • existing distribution network, Master Tezi,
  • University of Leuven, Belgium (in Dutch), 1997.
  • Fleischmann M., Quantitative Models for
  • Reverse Logistics. Springer, Berlin, Germany,
  • -
  • Lu Z., Bostel, N., ve Dejax, P., “The Simple Plant
  • Location Problem with Reverse Flows”. In: A.
  • Dolgui, J. Soldek, O. Zaikin (eds.), Suply Chain
  • Optimization. Kluwer Academic Publishers, In
  • press, 2004.
  • Salema M.I., Povoa, A.P.B., Novais, A.Q., “A
  • Warehouse-based Design Model for Reverse
  • Logistics”, Journal of the Operational
  • Research Society, Cilt 57, 615-629, 2006.
  • Min H. ve Ko H.J., “The Dynamic Design of a
  • Reverse Logistics Network from the Perspective
  • of Third-party Logistics Service Providers”,
  • International Journal of Production
  • Economics, baskıda, 2007.
  • Fandel, G., Stammen, M., “A General Model for
  • Extended Strategic Supply Chain Management
  • with Emphasis on Product Life Cycles Including
  • Development and Recycling”, International
  • Journal of Production Economics, Cilt 89, No
  • , 293-308, 2003.
  • Wang, C.H., Even, J.C., Adams, S.K., “A Mixed
  • Integer Linear Model for Optimal Processing and
  • Transport of Secondary Materials”, Resources,
  • Conservation and Recycling, Cilt 15, 65-78,
  • -
  • Pochampally, K.K. ve Gupta, S.M., “A Multiphase
  • Mathematical Programming Approach to
  • Strategic Planning of an Efficient Reverse Supply
  • Chain Network”, Proceedings of the IEEE
  • International Symposium on the Electronics
  • and the Environment, 72-78, 2003.
  • Schultmann, F., Engels, B., Rentz, O., “Closedloop
  • Supply Chains for Spent Batteries”,
  • Interfaces, Cilt 33, No 6, 57-71, 2003.
  • Min H., Ko, H.J., Ko, C.S., “A Genetic
  • Algorithm Approach to Developing the Multiechelon
  • Reverse Logistics Network for Product
  • Returns”, Omega, Cilt 34, 56-69, 2006.
  • Tang Q., Xie, F., “A Genetic Algorithm for
  • Reverse Logistics Network Design”, Third
  • International Conference on Natural
  • Computation, Cilt 4, 277-281, 2007.
  • Ammons J.C., Realff, M.J., Newton, D.,
  • “Reverse Production System Design and
  • Operation for Carpet Recycling”, Work paper,
  • Georgia Institute of Technology, 1997.
  • Shih, L.S., “Reverse Logistics System Planning
  • for Recycling Electrical Appliances and
  • Computers in Taiwan”, Resources,
  • Conservation and Recycling, Cilt 32, 55-72,
  • -
  • Xanthopoulos, A. ve Iakovou, E., “A
  • Methodological Framework for the Efficient
  • Configuration of a Reverse Logistics Network”,
  • in Protection2006, 2006.
  • Aras, N. ve Asken, D., “Locating Collection
  • Centers for Distance-and Incentive-dependent
  • Returns”, International Journal of Production
  • Economics, Cilt 111, 316-333, 2008.
  • Srivastava, S.K., “Network Design for Reverse
  • Logistics”, Omega, Cilt 36, 535-548, 2008.
Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi-Cover
  • ISSN: 1300-1884
  • Yayın Aralığı: Yılda 4 Sayı
  • Başlangıç: 1986
  • Yayıncı: Oğuzhan YILMAZ