___

• Sirin S.Y., Sirin K., Kaluc E., "Effect of the ion
• nitriding surface hardening process on fatigue
• behavior of AISI 4340 steel",Mater Charact,
• Cilt 59, No 4, 351-358, 2008.
• Terres M.A., Mohamed S.B., Sidhom
• H.,"Influence of ion nitriding on fatigue strength
• of low-alloy (42CrMo4) steel: Experimental
• characterization and predictive approach",Int J
• Fatigue, Cilt 32, No 11, 1795-1804, 2010.
• Genel K., Demirkol M., Çapa M.,"Effect of ion
• nitriding on fatigue behaviour of AISI 4140
• steel", Mat Sci Eng A-Struct,Cilt 279, No 1-2,
• -216, 2000.
• Guagliano M., Vergani L.,"Effect of nitriding on
• low-cycle fatigue properties", Int J Fatigue,Cilt
• , No 1, 67-73, 1997.
• De la Cruz P., Odén M., Ericsson T., "Influence
• of plasma nitriding on fatigue strength and
• fracture of a B-Mn steel.",Mat Sci Eng A-Struct,
• Cilt 242, No 1-2, 181-194, 1998.
• Ashrafizadeh F.,"Influence of plasma and gas
• nitriding on fatigue resistance of plain carbon
• (Ck45) steel",Surf Coat Technol, Cilt 174, No
• , 1196-1200, 2003.
• Çelik A., Karadeniz S.,"Improvement of the
• fatigue strength of AISI 4140 steel by an ion
• nitriding process",Surf Coat Technol, Cilt 72,
• No 3, 169-173, 1995.
• Jin O.,"The characterization of small fatigue
• crack growth in PH13-8 molybdenum stainless
• steel"Doktora tezi, Georgia University, Instuty of
• Technology, 2000.
• Murthy A.R.C., Palani G.S., Iyer N.R.,"State-ofthe-
• art review on fatigue crack growth analysis
• under variable amplitude loading",IE (I)
• Journal-CV, Cilt 85, 118-129, 2004.
• Schijve J., Fatigue of Structures and Materials,
• Springer, Netherlands, 2009.
• Julie A. B., Jess J.C., James L.,Fundamentals of
• Metal Fatigue Analysis, Prentice Hall, USA,
• -
• Guler M., Edil T.B., Bosscher P.J.,"Measurement
• of Particle Movement in Granular Soils Using
• Image Analysis"ASCE,Cilt 13, No 2, 116-122,
• -
• Yaman K., Sarucan A., Atak M., Aktürk
• N.,"Preperation of data for dynamic
• schedulingusing image processing and arima
• models",J Fac Eng Archit Gazi Univ, Cilt 16,
• No 1,19-40, 2001.
• Aydilek A.H., Guler M., Edil T.B.,"Use of Image
• Analysis in Determination of Strain Distribution
• during Geosynthetic Tensile Testing",ASCE, Cilt
• , No 1, 65-74, 2004.
• Özden M., Karagöz İ.,"A new gaussian
• distribution based adaptive simulation algorithm
• developed for artificial sight systems", J Fac Eng
• ArchitGazi Univ, Cilt 26, No 3, 691-700, 2011.
• Kanchanomai C., Yamamoto S., Miyashita Y.,
• Mutoh Y., McEvily A.,"Low cycle fatigue test for
• solders using non-contact digital image
• measurement system",Int J Fatigue, Cilt 24, No
• , 57-67, 2002.
• Pommier S., Freitas M.D.,"Effect on fatigue
• crack growth of interactions between overloads",
• Fatigue Fract Engng Mater Struct, Cilt 27, No
• , 709-722, 2002.
• Newman J.C., Elber W., "Testing ACE-24 on F,
• Fatigue ACE-9 on. Mechanics of fatigue crack
• closure", ASTM International; USA, 1988.
• Pereira M.V.S., Darwish F.A.I., Camarão A.F.,
• Motta S.H.,"On the prediction of fatigue crack
• retardation using Wheeler and Willenborg
• models", Mat Res,Cilt 10, No 2, 101-107, 2007.
• Shin C.S., Fleck N.A.,"Overload retardation in a
• stractural steel",Fatigue Frac Engng Mater
• Struct,Cilt 9, No 5, 379-393, 1987.
• Ward-Close C., Blom A., Ritchie
• R.,"Mechanisms associated with transient fatigue
• crack growth under variable-amplitude loading:
• An experimental and numerical study",Eng Fract
• Mech,Cilt 32, No 4, 613-638, 1989.