___

• Lee, D.M., “Base Isolation for Torsion Reduction
• in Asymmetric Structures Under Earthquake
• Loading”, Earthquake Engineering and
• Structural Dynamics, Cilt 8, 349-359, 1980.
• Pan, T.C. and Kelly, J.M., “Seismic Response of
• Torsionally Coupled Base Isolated Building”,
• Earthquake Engineering and Structural
• Dynamics, Cilt 11, 749-770, 1983.
• Nagarajaiah, S., Reinhorm, A. M. and
• Constantinou, M.C., “Torsion in Base Isolated
• Structures With Elastometric Isolation Systems”,
• ASCE Journal of Structural Engineering, Cilt
• , No 10, 2932-2951, 1993.
• Yang, Y.B. and Huang, W.H., “Equipment-
• Structure Interaction Considering the Effect of
• Torsion and Base Isolation”, Earthquake
• Engineering and Structural Dynamics, Cilt 27,
• -171, 1998.
• Goel, R.K., “Seismic Behaviour of Asymmetric
• Buildings With Supplemental Damping”,
• Earthquake Engineering and Structural
• Dynamics, Cilt 29, 461-480, 2000.
• Lin, W.H. and Chopra, A.K., “Understanding and
• Predicting Effects of Supplemental Viscous
• Damping on Seismic Response of Asymmetric
• One-Story Systems”, Earthquake Engineering
• and Structural Dynamics, Cilt 30, 1475-1494,
• -
• Colunga, T.A. and Soberon, L.G., “Torsional
• Response of Base Isolated Structures due to
• Asymmetries in the Superstructure”,
• Engineering Structures, Cilt, 1587-1599, 2002.
• Ryan, K.L. and Chopra, A.K., “Approximate
• Analysis Methods for Asymmetric Plan Base-
• Isolated Buildings”, Earthquake Engineering
• and Structural Dynamics, Cilt 31, 33-54, 2002.
• Colunga, A.T. and Soberon, L.G., “Torsional
• Response of Base-Isolated Structures due to
• Asymmetries in the Superstructure”,
• Engineering Structures, Cilt 24, 1587-1599,
• -
• Samali, B., Wu, Y.M. and Li, J., “Shake Table
• Tests on a Mass Eccentric Model with Base
• Isolation”, Earthquake Engineering and
• Structural Dynamics, Cilt 32, 1353-1372, 2003.
• Zavoni, E.H. and Leyva, A., “Torsional Response
• of Symmetric Buildings to Incoherent and Phase-
• Delayed Earthquake Ground Motion”,
• Earthquake Engineering and Structural
• Dynamics, Cilt 32, 268-276, 2001.
• Almazan, J.L. and Liera, J.C., “Accidental
• Torsion due to Overturning in Nominally
• Symmetric Structures Isolated with the FPS”,
• Eartquake Engineering and Structural
• Dynamics, Cilt 32, 919-948, 2003.
• Liera, J.C., Almazan, J.L. and Vial, I.J.,
• “Torsional Balance of Plan-Asymmetric
• Structures with Frictional Dampers: Analytical
• Results”, Earthquake Engineering and
• Structural Dynamics, Cilt 34, 1089-1108, 2005.
• Derdiman, M.K., Düzensiz Çok Katlı
• Betonarme Yapıların Davranışının Taban
• İzolatörleri, Enerji Sönümleyici ve
• Dağıtıcılarla İyileştirilmesi, Doktora Tezi,
• Süleyman Demirel Üniversitesi, Fen Bilimleri
• Enstitüsü, 2006.
• Colunga, T.A. and Rojas, C.Z., “Dynamic
• Torsional Amplifications of Base-İsolated
• Structures with an Eccentric Isolation
• System”, Engineering Structures, Cilt 28, No 1,
• -83, 2006.
• Demircan, Ş., Düşeyde Düzensiz Binalarda
• Temel Yalıtım Uygulaması, Yüksek Lisans
• Tezi, Sakarya Üniversitesi, Fen Bilimleri
• Enstitüsü, 2003.
• Özmen, C. and Ünay, A.İ., “Commonly
• Encountered Seismic Design Faults Due to the
• Architectural Design of Residential Buildings in
• Turkey”, Building And Environment, Cilt 42,
• No 3, 1406-1416, 2007.
• Bayındırlık ve İskan Bakanlığı, Deprem
• Bölgelerinde Yapılacak Yapılar Hakkında
• Yönetmelik, 2007.
• Tuna, M.E., Depreme Dayanıklı Yapı
• Tasarımı, Ajans Türk Basım,2000.
• Robinson, W.H., “Seismic Isolation of Civil
• Buildings in New Zealand”, Progress in
• Structural Engineering and Materials, Cilt 2,
• -324, 2000.
• SAP2000, Integrated Structural Analysis and
• Design Software, Computers and Structures,
• Inc., Berkeley, California, 2005.
• International Conference of Building Officials,
• Earthquake Regulations for Seismic Isolated
• Structures, Uniform Building Code, Chapter 23,
• Whittier, CA,1997.
• Naeim, F. and Kelly, J.M., Design of Seismic
• Isolated Structures, John Wiley and Sons, New
• York, 1999.