___

• Marzbanrad J., Mehdikhanlo M., Pour A.S., An energy absorption comparison of square, circular, and elliptic steel and aluminum tubes under impact loading, Turkish Journal of Engineering and Environmental Sciences, 33(3):159-66, 2010.
• Öztürk İ., Kaya N., Otomobil ön tampon çarpışma analizi ve optimizasyonu, Uludağ University Journal of The Faculty of Engineering, 13 (1), 2008.
• Alexander J., An approximate analysis of the collapse of thin cylindrical shells under axial loading. The Quarterly Journal of Mechanics and Applied Mathematics, 13(1), 10-5, 1960.
• Abramowicz W., Jones N., Dynamic axial crushing of square tubes, International Journal of Impact Engineering, 2(2), 179-208, 1984.
• Guillow S., Lu G., Grzebieta R., Quasi-static axial compression of thin-walled circular aluminium tubes, International Journal of Mechanical Sciences, 43(9), 2103-23, 2001.
• Al Galib D., Limam A., Experimental and numerical investigation of static and dynamic axial crushing of circular aluminum tubes, Thin-Walled Structures, 42(8), 1103-37, 2001.
• Altin M., Kılınçkaya Ü., Acar E., Güler M.A., Investigation of combined effects of cross section, taper angle and cell structure on crashworthiness of multi-cell thin-walled tubes, International Journal of Crashworthiness ,1-16, 2017.
• Tarigopula V., Langseth M., Hopperstad OS., Clausen AH., Axial crushing of thin-walled high-strength steel sections, International Journal of Impact Engineering, 32(5), 847-82, 2006.
• McGregor C.J., Vaziri R., Poursartip A., Xiao X., Simulation of progressive damage development in braided composite tubes under axial compression, Composites Part A: Applied Science and Manufacturing, 38(11), 2247-59, 2007.
• Xiao X., Botkin M.E., Johnson N.L., Axial crush simulation of braided carbon tubes using MAT58 in LS-DYNA, Thin-Walled Structures, 47(6), 740-9, 2009.
• Zarei H., Kröger M., Multiobjective crashworthiness optimization of circular aluminum tubes, Thin-walled structures, 44(3), 301-8, 2006;
• Huang X., Lu G., Yu TX., On the axial splitting and curling of circular metal tubes, International journal of mechanical sciences, 44(11), 2369-91, 2002.
• Huang X., Lu G., Yu TX., Energy absorption in splitting square metal tubes, Thin-walled structures, 40(2), 153-65, 2002.
• Tran T., Hou S., Han X., Nguyen N., Chau M., Theoretical prediction and crashworthiness optimization of multi-cell square tubes under oblique impact loading, International Journal of Mechanical Sciences, 89, 177-93,2014.
• Salehghaffari S., Tajdari M., Panahi M., Mokhtarnezhad F., Attempts to improve energy absorption characteristics of circular metal tubes subjected to axial loading, Thin-Walled Structures, 48(6), 379-90, 2010.
• Langseth M., Hopperstad O., Static and dynamic axial crushing of square thin-walled aluminium extrusions, International Journal of Impact Engineering, 18(7-8), 949-68, 1996.
• Tarlochan F., Samer F., Hamouda A., Ramesh S., Khalid K., Design of thin wall structures for energy absorption applications: Enhancement of crashworthiness due to axial and oblique impact forces, Thin-Walled Structures, 71, 7-17, 2013.
• Nia AA., Parsapour M., Comparative analysis of energy absorption capacity of simple and multi-cell thin-walled tubes with triangular, square, hexagonal and octagonal sections, Thin-Walled Structures, 74, 155-65, 2014.
• Zhang X., Zhang H., Energy absorption of multi-cell stub columns under axial compression, Thin-Walled Structures, 68, 156-63, 2013.
• Elmarakbi A., Long Y.X., MacIntyre J., Crash analysis and energy absorption characteristics of S-shaped longitudinal members, Thin-walled structures, 68, 65-74, 2013.
• Ahmad Z., Thambiratnam D., Tan A., Dynamic energy absorption characteristics of foam-filled conical tubes under oblique impact loading, International Journal of Impact Engineering, 37(5),475-88, 2010.
• Altin M., Güler M.A., Mert SK., The effect of percent foam fill ratio on the energy absorption capacity of axially compressed thin-walled multi-cell square and circular tubes, International Journal of Mechanical Sciences, 131, 368-79, 2017.
• Hou S., Li Q., Long S., Yang X., Li W., Multiobjective optimization of multi-cell sections for the crashworthiness design, International Journal of Impact Engineering, 35(11), 1355-67, 2008.
• Mirfendereski L., Salimi M., Ziaei-Rad S., Parametric study and numerical analysis of empty and foam-filled thin-walled tubes under static and dynamic loadings, International Journal of Mechanical Sciences, 50(6), 1042-57, 2008.
• Qi C., Yang S., Crashworthiness and lightweight optimisation of thin-walled conical tubes subjectedto an oblique impact, International Journal of Crashworthiness, 19(4), 334-51, 2014.
• Yang S., Qi C., Multiobjective optimization for empty and foam-filled square columns under oblique impact loading, International Journal of Impact Engineering, 54, 177-91, 2013.
• Qi C., Yang S., Dong F., Crushing analysis and multiobjective crashworthiness optimization of tapered square tubes under oblique impact loading, Thin-Walled Structures, 59, 103-19, 2012.
• Gao Q., Wang L., Wang Y., Wang C., Crushing analysis and multiobjective crashworthiness optimization of foam-filled ellipse tubes under oblique impact loading, Thin-Walled Structures, 100, 105-12, 2016.
• Isaac C.W., Oluwole O., Energy absorption improvement of circular tubes with externally press-fitted ring around tube surface subjected under axial and oblique impact loading, Thin-Walled Structures, 109, 352-66, 2016.
• Djamaluddin F., Abdullah S., Ariffin A.K., Nopiah Z.M., Optimization of foam-filled double circular tubes under axial and oblique impact loading conditions, Thin-Walled Structures, 87, 1-11, 2015.
• Jin S.Y, Altenhof W., Comparison of the load/displacement and energy absorption performance of round and square AA6061-T6 extrusions under a cutting deformation mode, International Journal of Crashworthiness, 12(3), 265-78, 2007.
• Wu S., Zheng G., Sun G., Liu Q., Li G., Li Q., On design of multi-cell thin-walled structures for crashworthiness, International Journal of Impact Engineering, 88, 102-117, 2016.