BOR KATKILI STİREN AKRİLİK BOYALARIN ALEV GECİKTİRME, DUMAN BASTIRMA VE ANTİBAKTERİYEL ETKİNLİKLERİ

Bazı bor bileşikleri (kalsiyum ve potasyum metaborat, sodyum tetraborat, susuz ve sulu çinko borat) su bazlı stiren akrilik boyaya üç farklı konsantrasyonda (% 1, 2 ve 3 m/m) ayrı ayrı ilave edildi. Boratlarla karşılaştırmak amacıyla amonyum polifosfat katkısıyla deneyler tekrarlandı. Katkılı boyaların alev geciktirme, duman bastırma ve iki bakteriye karşı (E.coli ve S.aureus) antibakteriyel etkinlikleri ile boyama özellikleri standart metotlar kullanılarak belirlendi. Sonuç olarak sodyum tetraboratın alev geciktirici ve duman bastırıcı katkı maddesi olarak bu boyalarda kullanılabileceği ve boyanın viskozitesinde gözlenen azalmanın, gerektiğinde kalınlaştırıcı kullanılarak giderilebileceği ileri sürüldü. Çinko boratın da alev geciktirme özelliğine ilave olarak, S.aureus bakterisine karşı etkin bir reaktif olduğu gözlendi. Bu iki borat bileşiğinin, boyanın boyama özelliklerini olumsuz etkilemediği belirlenen çalışmada, diğer borlu bileşiklerin de aleve ve dumana karşı kısmi etkinliğe sahip olduğu; ancak hiçbirinde antibakteriyel etkinliğin bulunmadığı ifade edildi.

___

  • Lambourne, R., Paints and surface coatings: Theory and Practice, Ellis Horwood Limited, England, 1987.
  • Rothenberg, G.B., Paint additives, Noyes Data Corporation, USA, 1978.
  • Giudice, C.A., Benitez, J.C. “Zinc borates as flame retardant pigments in chlorine containing coatings” Progress in Organic Coating, Cilt 42, No 1-2, 82-88, 2001.
  • Genovese, A., Shanks, R.A. “Structural and thermal interpretation of the synergy and interactions between the fire retardants magnesium hydroxide and zinc borate” Polymer Degradation and Stability, Cilt 13, No 1, 2-13, 2007.
  • Köytepe, S., Vural, S., Seçkin, T. “Molecular design of nanometric zinc borate containing polyimide as a route to flame retardant materials” Materials Research Bulletin, Cilt 44, No 2, 369-376, 2009.
  • Laoutid, F., Bonnaud, L., Alexandre, M., Lopez-Cuesta, J.M., Dubois, P.H. “New prospects in flame retardant polymer materials: From fundamentals to nanocomposites” Materials Science Engineering R-Research, Cilt 63, No 3, 100-125, 2009.
  • Martin, C., Ronda, J.C., Cadiz, V. “Boron-containing novolac resins as flame retardant materials” Polymer Degradation Stability, Cilt 91, No 4, 747-754, 2006.
  • Ayar, B., Çinko Borat Sentezi ve Yüksek Sıcaklıkta Pigment Olarak Kullanılabilirliği, Yüksek Lisans Tezi, Gazi Üniversitesi, Fen Bilimleri Enstitüsü, Ankara, 2007.
  • Ramazani, S.A., Rahimi, A., Frounchi, M., Radman, S. “Investigation of flame retardancy and physical-mechanical properties of zinc borate and aluminum hydroxide propylene composites” Materials & Design, Cilt 29, No 5, 1051–1056, 2008.
  • Abd El-Wahab, H., Abd El-Fattah M., Gabr. M.Y. “Preparation and characterization of flame retardant solvent base and emulsion paints” Progress Organic Coating, Cilt 69, No 3, 272-277, 2010.
  • Pawlowski, K.H., Schartel, B., Fichera, M.A., Jäger, C. “Flame retardancy mechanisms of bisphenol A bis(Diphenyl phosphate) in combination with zinc borate in bisphenol A polycarbonate/Acrylonitrile–butadiene–styrene blends”, Thermochimica Acta, Cil 498, No 1-2, 92-99, 2010.
  • Mergen, A., Ipek, Y., Bölek, H., Öksüz, M. “Production of nano zinc borate (4ZnO.B2O3.H2O) and its effect on PVC” Journal of Europan Ceramic Society, Cilt 32, No 9, 2001-2005, 2012.
  • Cui, Y., Liu, X., Tian, Y., Ding, N., Wang, Z. “Controllable synthesis of three kinds of zinc borates and flame retardant properties in polyurethane foam” Colloid Surface A-Physicochemical and Engineering Aspects, Cilt 414, 274-280, 2012.
  • Scillinger, B.M., Berstein, M., Goldberg, L.A., Shalita, A.R. “Boric acid poisoning” Journal of American Academy of Dermatology, Cilt 7, No 5, 667-673, 1982.
  • Spinillo, A., Capuzzo, E., Gulminnetti, R. “Prevalence and risk factors for fungal vaginitis caused by non-albicans species” American Journal of Obstetrics and Gynecology, Cilt 176, No 1, 138-141, 1997.
  • Luan, Q., Desta, T., Chehab, L., Sanders, V.J., Plattner, J., Graves, D.T. “Inhibition of experimental periodontitis by a topical boron based antimicrobial” Journal of Dental Research, Cilt 87, No 2, 148-152, 2008.
  • Akgüç, N., Çöl, B., Güneş, H. “Özdemir D, Determination of growth curves of some bacteria as a function of increasing boron concentration” 4th International Boron Symposium, Eskişehir, Turkey, 15-17, 2009.
  • Zgondek, E.M., Bacciarelli, A., Rybicki, E. “Antibacterial properties of silver-finished textiles” Fibres & Textile Eastern Europa, Cilt Cilt 16, No 5, 101-107, 2008.
  • Gorjanc, M., Bukosek, V., Goronsek, M. “CF4 Plasma and silver functionalized cotton” Textile Research Journal, Cilt 80, No 20, 2204-2213, 2010.
  • Caballero, L., Whitehead, K.A., Allen, N.S., Verran, J. “Photoinactivation of Escherichia coli on acrylic paint formulations using fluorescent” Dyes and Pigments, Cilt 86, No 1, 56-62, 2010.
  • Holtz, R.D., Lima, B.A., Souza-Filho. A.G., Brocchi, M., Alves, O.L. “Nanostructured silver vanadate as a promising antibacterial additive to water-based paints” Nanomedicine -Nanotechnology Biology and Medicine, Cilt 8, No 6, 935-940, 2012.
  • http://www.boren.gov.tr/en/icerik.php?id=11 (Eylül 2013)
  • TS 11162-2 EN ISO 4589-2: Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient - temperature test.
  • ASTM D 2843-10: Standard test method for density of smoke from the burning or decomposition of plastics.
  • Tutak, M., Gün, F. “Antimicrobial effect of C.I. Basic Red 18:1 and C.I. Basic Yellow 51 on some pathogenic bacteria” Fibres and Polymer, Cilt 12, No 4, 457-460, 2011.
  • Kayran, B., Su bazlı stiren akrilik esaslı çinko borat katkılı boyaların alev geciktirme, duman bastırma ve antibakteriyel etkinlikleri, Yüksek Lisans Tezi, Gazi Üniversitesi, Fen Bilimleri Enstitüsü, Ankara, 2013.
  • Ökenek, F., Su bazlı ve stiren akrilik esaslı boyalarda alkali-toprak alkali borat katkılarının alev geciktirici özelliklerinin incelenmesi, Yüksek Lisans Tezi, Gazi Üniversitesi, Fen Bilimleri Enstitüsü, Ankara, 2013.
  • Duquesne, S., Magnet, S., Delobel, R. “Intumescent paints: Fire protective coatings for metallic substrates” Surface Coating Technology, Cilt 180, 302-307, 2003.
  • Jimenez, M., Duquesne, S., Bourbigot, S. “Characterization of the performance of an intumescent fire protective coating” Surface Coating Technolgy, Cilt 201, No 3-4, 979-987, 2006.
  • Bourbigot, S., Bras, M.L., Leeuwendal, R., Shen, K.K., Schubert, D. “Recent advances in the use of zinc borates in flame retardancy of EVA” Polymer Degradation and Stability, Cilt 64, No 3, 419 – 425, 1999.
  • Temiz A, Genel mikrobiyoloji uygulama teknikleri, Hatipoğlu Yayınevi, Ankara, 2010.
  • Hochmannova L, Vytrasova J “Photocatalytic and antimicrobial effects of interior paints” Progress Organic Coating, Cilt 67, No 1, 1-5, 2010.
  • Furtuna, Z., Silikon esaslı dış cephe boyalarının deneysel olarak incelenmesi, Yüksek Lisans Tezi, Gazi Üniversitesi, Fen Bilimleri Enstitüsü, Ankara, 2006.
  • Schmidt, R. “In the line of fire-flame retardants overview” Industrial Minerals, 37-41, February 1999.
Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi-Cover
  • ISSN: 1300-1884
  • Yayın Aralığı: Yılda 4 Sayı
  • Başlangıç: 1986
  • Yayıncı: Oğuzhan YILMAZ