___

• Tonbul T. Selcen, Beş Eksenli bir Robot Kolunun Ters Kinematik
• Hesaplamalarının ve Yörünge Planlamasının Yapılması, Yüksek Lisans
• Tezi, Gazi Üniversitesi, F.B.E., 2002.
• T.S. Tonbul ve M. Sarıtaş Beş Eksenli Bir Edubot Robot Kolunda Ters Kinematik Hesaplamalar...
• Gazi Üniv. Müh. Mim. Fak. Der. Cilt 18, No 1, 2003
• Kirecci A. ve Gilmartin M.J., “Improved Trajectory Planning Using Arbitrary
• Power Polynomials”, Proceedings of I.Mech.E.,vol. 208, s 3-13, 1994.
• Jones J.R., “Vibration Due to Motion Discontinuouties in Hydraulically
• Actuated Robots”, Robotica vol.1, s 211-215, 1993.
• Dorf, R.C., Modern Control Systems, Addison-Wesley, s 97-102,
• Massachusetts, 1983.
• Denavit J. and Hartenberg R. S., “A Kinematic Notation for Lower-Pair
• Mechanisms Based on Matrices”, Journal of Applied Mechanics, s 215-221,
• -
• Engelberger J.F., Robotics in Practice, AMACOM, New York, 1980.
• Ernst H.A., MH-1 A Computer-Operated Mechanical Hand, Ph.D.thesis,
• Massachusetts Institue of Technology, Cambridge, 1961.
• Sutherland J.M., Robot Applications, IIT Research Institue, Chicago, 1970.
• Roberts L.G., Homogeneous Matrix Representation and Manipulation of NDimensional
• Constructs, Lincoln Laboratory, Massachusetts Institue of
• Technology, Document no. MS1045, Cambridge, 1965.
• Munson J.H., The SRI Intelligent Automation Program, Stanford Research
• Institue, s 113-117, Stanford, 1981.
• Scheinman V.C., Design of a Computer-Controlled Manipulator, Artificial
• Intelligence Laboratoy, Stanford Universty, Stanford, 1969.
• Duda R.O. and Hart P.E., Experiments in Science Analysis, Stanford Research
• Institue, s 113-117, Stanford, 1970.
• Paul R.P., “Modelling”, Trajectory Calculation and Servoing of a
• Computer-Controlled Arm, Artificial Intelligence Laboratory, Stanford
• Universty, 1972.
• Whitney D.E., “The Mathematics of Coordinated Control of Proshetic Arms
• and Manipulators”, Journal of Dynamics Systems, Measurement and
• Control, s 303-309, 1972.
• Nitzan D. and Rosen C.A., “Programmable Industrial Automation”, IEE
• Transactions on Computers, s 1259-1270, 1976.
• Saveriano J.W., “Interview with Charles Rosen”, Robotics Age, vol3, no.3, s
• -26, 1981.
• Lozano-Perez T., “Robot Programming”, Proceedings of the IEEE, vol. 71,
• no.7, s 821-841, 1983.
• http://trueforce.com/Robot Gallery/robot gallery3.htm#DanteII.
• http://trueforce.com/New/Sony20001121.htmhumanoid.
• http://trueforce.com/Space/ISS/SSRMS.htm
• Paul, R., Robot Manipulators: Mathematics, Programming and Control,
• MIT, Cambridge, 1981.
• Somle J., Lantos and Cat P.T., “Anvanced Robot Control”, Akedemiai Kiada,
• s 4-176, Budapest, 1997.
• Murray, Richard M., A Mathematical Introduction to Robotic Manipulation,
• CRC , s 78-124, Boca Raton, 1994.
• Paden B., Kinematics and Control Robot Manipulators, PhD. Thesis,
• Universty of California, Berkeley, 1986.
• Kahan W., Lectures on Computional aspects of Geometry, Unpublished
• manuscripts, 1983.
• http://www.rhinorobotics.com/scara.html
• http://www.robotica.co.uk/
• Selig, J.M., Gemetrical Methods in Robotics, Springer, s 52-61, New York,
• -
• Bayseç S. And Alıcı G., “Two Dimensional Step Guidance of a Dynamic Load
• Avoiding Residual Vibrations by a Point Positioning Robot Manipulator”,
• Computer Simulation Conference, s 425-428, Boston, 1993.
• Gupta A. and Kamal D., Practical Motion Planning in Robotics: Current
• Approches and Future, Wiley, s 172-205, 1998.