___

• Kawalec, A., Wiktor, J. ve Ceglarek, D.,
• “Comparative Analysis of Tooth-Root Strength
• Using ISO and AGMA Standards in Spur and
• Helical Gears With FEM-based Verification”,
• Journal of Mechanical Design, Cilt 128, 1141-
• , 2006.
• Muni, D. V., Kumar V.S. ve Muthuveerappan,
• G., “Optimization of Asymmetric Spur Gear
• Drives for Maximum Bending Strength Using
• Direct Gear Design Method”, Mechanics Based
• Design of Structures and Machines, Cilt 35, No
• , 127 – 145, 2007.
• Kapelevich, A., “Geometry and Design of
• Involute Spur Gears with Asymmetric Teeth”,
• Mechanism and Machine Theory, Cilt 35, 117-
• , 2000.
• Costopoulos T. ve Spitas V., “Reduction of Gear
• Fillet Stresses by using One-sided Involute
• Asymmetric Teeth”, Mechanism and Machine
• Theory, Cilt 37, No 3, 157-182, 2009.
• Buckingham, E., Analytical Mechanics of
• Gears, McGraw-Hill, New York, A.B.D., 1949.
• Salamoun, C. ve Suchy M., “Computation of
• Helical or Spur Gear Fillets”, Mechanism and
• Machine Theory, Cilt 8, No 3, 305-323, 1973.
• Arıkan, M.A.S., “Determination of Maximum
• Possible Contact Ratios for Spur Gear Drives
• with Small Number of Teeth”, ASME Design
• Engineering Technical Conferences, Cilt 82, 569-
• , 1995.
• Litvin, F.L., Gear Geometry and Applied
• Theory, Prentice Hall, New Jersey, A.B.D, 1994
• Litvin, F.L. ve Fuentes, A., Gear Geometry and
• Applied Theory, Cambridge University Press,
• New York, A.B.D., 2004.
• Tsay, C.-B., “Helical Gears with Involute Shaped
• Teeth: Geometry, Computer Simulation, Tooth
• Contact Analysis, and Stress Analysis”, ASME J.
• Mech. Transm. Autom. Des., Cilt 110, 482-491,
• -
• Litvin, F.L., Lu, J., Townsend, D.P. ve Howkins,
• M., “Computerized Simulation of Meshing of
• Conventional Helical Involute Gears and
• Modification of Geometry”, Mechanism and
• Machine Theory, Cilt 34, 123-147, 1999.
• Liu, C.-C. ve Tsay, C.-B., “Tooth Undercutting
• of Beveloid Gears”, ASME Journal of
• Mechanical Design, Cilt 123, 569-576, 2001.
• Tseng, R.-T. ve Tsay, C.-B., “Mathematical
• Model and Undercutting of Cylindrical Gears
• with Curvilinear Shaped Teeth”, Mechanism
• and Machine Theory, Cilt 36, 1189-1202, 2001.
• Brauer, J., “A General Finite Element Model of
• Involute Gears”, Finite Elements in Analysis
• and Design, 40, 1857-1872, 2004.
• Chen, C.-F. ve Tsay, C.-B., “Tooth Profile
• Design for the Manufacture of Helical Gear Sets
• with Small Numbers of Teeth”, Int. J. of
• Machine Tools and Manufacture, Cilt 45, No
• -13, 1531-1541, 2005.
• Yang, S.-C., “Mathematical Model of a Helical
• Gear with Asymmetric Involute Teeth and Its
• Analysis”, Int. J. Adv. Manuf. Technol., Cilt
• , No 5-6, 448-456, 2005.
• Li, J.-L. ve Chiou, S.-T., “Surface Design and
• Tooth Contact Analysis of an Innovative
• Modified Spur Gear with Crowned Teeth”,
• Journal of Mechanical Engineering Science,
• Cilt 219, No 3, s. 193-207, 2005.
• Fetvacı, C. ve İmrak, C., “Mathematical Model of
• a Spur Gear with Asymmetric Involute Teeth and
• Its Cutting Simulation”, Mechanics Based
• Design of Structures and Machines, Cilt 36,
• No1, 34- 46, 2008.
• Fetvacı, C. ve İmrak, C.E., “Kremayer Takım ile
• Evolvent Düz Dişli Çarkların İmalat
• Simulasyonu”, Mühendis ve Makina, Cilt 48,
• No 572, 9-15, 2007.
• ISO53 Cylindirical Gears for General and Heavy
• Engineering-Basic Rack, International
• Organization for Standartization, Switzerland,
• -
• Maitra, G.M., Handbook of Gear Design, Tata
• McGraw-Hill, New Delhi, India, 2000.