GIDA BİLEŞENLERİNİN SPREY SOĞUTMA YÖNTEMİ İLE ENKAPSÜLASYONU
Sprey soğutma yöntemi ile gıda bileşenlerinin enkapsülasyonu son yıllarda dikkat çeken bir teknoloji olup, özellikle ısıya ve suya duyarlı aktif maddelerin kaplanmasında kullanılmaktadır. Sprey soğutma yöntemi, aktif maddenin kaplama materyali veya materyalleri içerisine dispersiyonu, bu karışımın atomizasyonu ve katılaştırma aşamalarından oluşmaktadır. Sprey soğutma yöntemi ile enkapsülasyon işleminde mumlar, hidrojenize yağlar, yağ asitleri ve düşük sıcaklıklarda jel oluşturma özelliği iyi olan protein ve karbonhidratlar kaplama materyalleri olarak kullanılmaktadır. Kaplama materyallerinin tipi ve karışım oranı diğer enkapsülasyon yöntemlerinde olduğu gibi sprey soğutma yönteminde de enkapsülasyon etkinliğini belirleyen önemli özelliklerdir. Sprey soğutma yönteminin kullanıldığı çalışmalarda genellikle aromalar, vitaminler, mineraller, yağlar ve probiyotikler enkapsüle edilmiştir. Bu çalışmalarda kullanılan kaplama materyallerinin çeşidinin ve oranının enkapsülasyon etkinliği üzerine etkisi ve/veya depolama süresince enkapsüle edilen aktif maddenin stabilitesi incelenmiştir. Bu derleme çalışmasında, sprey soğutma yönteminin enkapsülasyon işleminde kullanılabilirliği ve literatürde gerçekleştirilen çalışmaların kapsamları detaylı olarak değerlendirilmiştir.
ENCAPSULATION OF FOOD MATERIALS WITH SPRAY COOLING METHOD
Encapsulation of food materials with spray cooling has been a remarkable technology in recent years and is especially used for encapsulating heat and water sensitive active materials. The spray cooling method comprises the dispersion of the active material into the coating material or materials, the atomization of the mixture and the solidification stages. In the food industry, aromas, vitamins, oils and probiotics can be encapsulated by using spray cooling method. Waxes, hydrogenated oils, fatty acids and, proteins and carbohydrates that are good at forming gels at low temperatures are used as coating materials in the encapsulation process by spray cooling. The type and mixing ratio of coating materials are the most important features that determine the encapsulation efficiency in spray cooling as well as in other encapsulation methods. Aromas, vitamins, minerals, oils and prebiotics are mostly encapsulated in the studies where spray cooling method is used. In these studies, the effect of coating material type and ratio on encapsulation efficiency and/or the storage stability of active material have been investigated. In this review study, usability of spray cooling method in encapsulation process and the scope of the studies carried out in the literature have been evaluated.
___
- Alvim, I.D., Souza, F.D.S.D., Koury, I.P., Jurt, T., Dantas,
F.B.H. (2013). Use of the spray chilling method to deliver
hydrophobic components: physical characterization
of microparticles. Ciencia e Tecnologia de Alimentos,
33(1), 34-39.
- Alvim, I.D., Stein, M.A., Koury, I.P., Balardin, F., Dantas,
H., Cruz, C.V. (2016). Comparison between the spray
drying and spray chilling microparticles contain
ascorbic acid in a baked product application. LWT -
Food Science and Technology, 65, 689-694.
- Bampi, G.B., Backes, G.T., Cansian, R.L., Matos-Jr, F.E.,
Ansolin, I.M.A., Poleto, B.C., Corezzolla, L.R., Favaro-Trindade,
C.S. (2016). Spray chilling microencapsulation
of Lactobacillus acidophilus and
Bifidobacterium animalis subsp. lactis and its use in
the preparation of savory probiotic cereal bars. Food
and Bioprocess Technology, 9, 1422-1428.
- Can Karaca, A., Low, N., Nickerson, M. (2013). Encapsulation
of flaxseed oil using a benchtop spray dryer for
legume protein-maltodextrin microcapsule preparation.
Journal of agricultural and food chemistry,
61(21), 5148-5155.
- Consoli, L., Grimaldi, R., Sartori, T., Menegalli, F.C.,
Hubinger, M.D. (2016). Gallic acid microparticles
produced by spray chilling technique: Production and
characterization. LWT - Food Science and Technology,
65, 79-87.
- de Lara Pedroso, D., Thomazini, M., Heinemann, R.J.B.,
Favaro-Trindade, C.S. (2012). Protection of
Bifidobacterium lactis and Lactobacillus acidophilus
by microencapsulation using spray-chilling. International
Dairy Journal, 26(2), 127-132.
- Desai, K.G.H., Park H.J. (2005). Recent Developments in
Microencapsulation of Food Ingredients. Drying
Technology, 23, 1361-1394.
- Gamboa, O.D., Gonçalves, L.G., Grosso, F.C. (2011). Microencapsulation
of tocopherols in lipid matrix by
spray chilling method. Procedia Food Science, 1,
1732-1739.
- Garti, N., McClements, J.D. (2012), Encapsulation technologies
and delivery systems for food ingredients
and nutraceuticals. Woodhead Publishing, p. 110-
130, ISBN 9780857091246
- Koç, M., Sakin, M., Ertekin, F. (2010). Mikroenkapsülasyon
ve gıda teknolojisinde kullanımı. Pamukkale
Üniversitesi Mühendislik Bilimleri Dergisi, 16, 77-
86.
- Kwak, H.S. (Ed.). (2014). Nano-and microencapsulation
for foods. John Wiley & Sons, p. 1-42, 223-248,
ISBN 9781118292334
- Lakkis, J.M. (2016). Encapsulation and controlled release
technologies in food systems. John Wiley & Sons,
p.116-177, ISBN 9781118733523
- Matos-Jr, F.E., Comunian, T.A., Thomazini, M., FavaroTrindade,
C.S. (2017). Effect of feed preparation on
the properties and stability of ascorbic acid microparticles
produced by spray chilling. LWT-Food Science
and Technology, 75, 251-260.
- Matos-Jr, F.E., Di Sabatino, M., Passerini, N., FavaroTrindade,
C.S., Albertini, B. (2015). Development
and characterization of solid lipid microparticles
loaded with ascorbic acid and produced by spray congealing.
Food Research International, 67, 52-59.
- Okuro, P.K., Thomazini, M., Balieiro, J.C., Liberal, R.D.,
Fávaro-Trindade, C.S. (2013). Co-encapsulation of
Lactobacillus acidophilus with inulin or polydextrose
in solid lipid microparticles provides protection and
improves stability. Food Research International,
53(1), 96-103.
- Oriani, V.B., Alvim, I.D., Consoli, L., Molina, G., Pastore,
G.M., Hubinger, M.D. (2016). Solid lipid microparticles
produced by spray chilling technique to deliver
ginger oleoresin: Structure and compound retention.
Food Research International, 80, 41-49.
- Paucar, O.C., Tulini, F.L., Thomazini, M., Balieiro, J.C.C.,
Pallone, E.M.J.A., Favaro-Trindade, C.S. (2016).
Production by spray chilling and characterization of
solid lipid microparticles loaded with vitamin D
3. Food and Bioproducts Processing, 100, 344-350.
- Pelissari, J.R., Souza, V.B., Pigoso, A.A., Tulini, F.L.,
Thomazini, M., Rodrigues, C.E. C., Urbano, A., Favaro-Trindade,
C.S. (2016). Production of solid lipid
microparticles loaded with lycopene by spray
chilling: Structural characteristics of particles and lycopene
stability. Food and Bioproducts Processing,
98, 86-94.
- Ribeiro, M.M.M., Arellano, D.B., Grosso, C.R.F. (2012).
The effect of adding oleic acid in the production of
stearic acid lipid microparticles with a hydrophilic
core by a spray-cooling process. Food Research International,
47(1), 38-44.
- Rokka, S., Rantamäki, P. (2010). Protecting probiotic bacteria
by microencapsulation: challenges for industrial
applications. European Food Research and Technology,
231(1), 1-12.
- Sagis, L.M. (2015). Microencapsulation and microspheres
for food applications. Academic Press, p.235-248,
ISBN 9780128003503
- Salvim, M.O., Thomazini, M., Pelaquim, F.P., Urbano, A.,
Moraes, I.C., Favaro-Trindade, C.S. (2015). Production
and structural characterization of solid lipid microparticles
loaded with soybean protein hydrolysate.
Food research international, 76, 689-696.
- Sartori, T., Consoli, L., Dupas Hubinger, M., Cecilia Menegalli,
F. (2015). Ascorbic acid microencapsulation
by spray chilling: Production and characterization.
LWT-Food Science and Technology, 63, 353-360.
- Schrooyen, P.M.M., van der Meer, R., de Kruif, C.G.
(2001). Microencapsulation: its application in nutrition,
Proceedings of the Nutrition Society, 60, 475-
479.
- Ünal, E., Erginkaya, Z. (2010). Probiyotik mikroorganizmaların
mikroenkapsülasyonu. Gıda Dergisi, 35(4),
297-304.
- Wegmüller, R., Zimmermann, M. B., Bühr, V. G., Windhab,
E. J., Hurrell, R. F. (2006). Development, stability,
and sensory testing of microcapsules containing
iron, iodine, and vitamin A for use in food fortification,
Journal of food science, 71(2), 181-187.
- Yajima, T., Umeki, N., Itai, S. (1999). Optimum spray
congealing conditions for masking the bitter taste of
clarithromycin in wax matrix. Chemical and Pharmaceutical
Bulletin, 47, 220-225.
- Zoet, F. D., Grandia, J., Sibeijn, M. (2011). Encapsulated
fat soluble vitamin, NL Patent, 050668
- Zungur, A. (2013). Mikroenkapsülasyon işleminin ekstra
sızma zeytinyağı tozunun depolanması sırasında oksidatif
stabilite, sorpsiyon ve fiziksel kalite kriterleri
üzerine etkisi. Ege Üniversitesi, Fen Bilimleri Enstitüsü,
Yüksek Lisans Tezi, İzmir.
- Zungur, A., Güngör, Ö., Koç, M., Kaymak Ertekin, F.
(2013). Emülsiyonların özellikleri ve emülsifikasyon
koşullarının aroma ve yağların mikroenkapsülasyonu
üzerine etkisi. Akademik Gıda, 11, 116-124.