SIFIR DEĞERLİKLİ DEMİR KULLANILARAK FENTON BENZERİ OKSİDASYON YÖNTEMİ İLE AZO BOYAR MADDE GİDERİMİ

Bu çalışmada Methylene Blue (MB) boyar maddesinin Fenton-benzeri oksidasyon işlemi ile arıtılabilirliği araştırılmıştır. Arıtma verimi renk ve Kimyasal Oksijen İhtiyacı (KOI) parametreleri ile değerlendirilmiştir. Bu işlem için optimum şartların belirlenmesinde Feo ve H2O2 konsantrasyonu, pH ve başlangıç boyar madde konsantrasyonu dikkate alınmıştır. Buna göre 20 dakikalık bir reaksiyon sonunda optimum değerler ; Feo=0.1 gL-1, H2O2=75 mgL-1ve pH=3.0 olarak bulunmuştur. Bu değerler için 100 mgL-1 MB konsantrasyonunda % 99.0 renk ve % 84.6 KOI giderim verimi elde edilmiştir. Boyar madde konsantrasyonunun artması hem renk hem de KOI giderme verimi düşürmüştür

AZODYESTUFFREMOVAL USING ZERO-VALENT IRONWITH FENTON -LIKE OXIDATION METHOD

In this study, the removable of Methylene Blue (MB) was investigated by Fenton-like oxidation process. The removal yield was evaluated associated with color and chemical oxygen demand (COD). Feo , H2O2 and initial dyestuff concentrations and pH were considered in determination of optimum conditions for the process. At the end of reaction for 20 minutes the optimum values were found as Feo=0.1 gL-1 , H2O2 =75 mgL-1 and pH=3.0. The color of 99.0% and COD of 84.6% removal were obtained at the MB concentration of 100 mg L-1 for these values. Increasing of dyestuff concentration reduced both color and COD removal

___

  • Cao M., Wang L., Wang L., Chen J., Lu X. (2013): “Remediation of DDTs Contaminated Soil İn A Novel Fenton Like System with Zero Valent İron”, Chemosphere, No. 90, sf. 2303-2308.
  • Costa R. C. C,. Moura F. C. C., Ardisson J. D., Fabris J. D., Lago R. M.(2008): “Highly Active Heterogeneous Fenton-like Systems Based on Fe0/Fe3O4 Composites Prepared by Controlled Reduction of Iron Oxides”, Applied Catalysis B: Environmental, No. 83, sf. 131–139.
  • Dutta K., Mukhopadhyay S., Bhattacharjee S., Chaudhuri B. (2001): “Chemical Oxidation of Methylene Blue Using a Fenton-Like Reaction”, Journal of Hazardous Materials, B84, sf. 57–71.
  • Ferreira-Leitao V. S., Andrade de Carvalho M. E., Bon E. P. S. (2007): “Lignin Peroxide as Efficiency for Methylene Blue Decolouration: Comparison to Reported Methods”, Dyes and Pigments, No. 74, sf. 230-236.
  • Filibeli A. (2005): “Arıtma Çamurlarının İşlenmesi”, Dokuz Eylül Üniversitesi Yayınları, No:255.
  • Fu F., Wang Q., Tang B. (2010): “Effective Degradation of C.I. Acid Red 73 by Advanced Fenton Process”, Journal of Hazardous Materials, No. 174, sf. 17–22.
  • Gönder Z. B., Barlas H. (2005): “Fenton Prosesi İle Renkli Atıksulardan Renk ve KOİ Giderimi”, II. Mühendislik Bilimleri Genç Araştırmacılar Kongresi, MBGAK İstanbul, sf. 562-567.
  • Grcic I., Papic S., Zizek K., Koprivanac N. (2012): “Zero Valent Iron Fenton Oxidation of Reactive Dye Wastewater Under UCC and Solar Irradition”, Chemical Engineering Journal, sf. 195-196.
  • Gül Ş., Yıldırım Ö. (2009): “Degradation of Reactive Red 194 and Reactive Yellow 145 Azo Dyes by O3 and H2O2/UV-C Processes”, Chemical Engineering Journal, No. 155, sf. 684-690.
  • Kang Y. W., Cho M. J., Hwang K. Y. (1999): “Correction of Hydrogen Peroxide Interference on Standart Chemical Oxygen Demand Test”, Water Research, Cilt 33, No. 5, sf. 1247- 1251.
  • Martins R. C., Henriques L. R., Ferreira R. M. Q. (2013): “Catalytic Activity of Low Cost Materials Pollutants Abatement by Fenton’s Process”, Chemical Engineering Science, No. 100, sf. 225-233.
  • Panizza M., Barbucci A., Ricotti R., Cerisola G. (2007): “Electrochemical Degradation of Methylene Blue”, Separation and Purification Technology, No. 54, sf. 382–387.
  • Shu H. Y., Chang M. C., Chang C. C. (2009): “Integration of Nano Sized Zero-Valent Iron Particles Addition with UV/H2O2 Process for Purification of Azo Dye Acid Black 24 Solution”, Journal of Hazardous Materials, No. 167, sf. 1178–1184.
  • Sun S. P., Li C. J., Sun J. H., Shi S. H., Fan M. H., Zhou Q. (2009): “Decolorization of An Azo Dye Orange G in Aqueous Solution by Fenton Oxidation Process: Effect Of System Parameters and Kinetic Study”, Journal of Hazardous Materials, No. 161, sf. 1052–1057.
  • Weng C. H., Lin Y. T., Chang C. K., Lin N. (2013): “Decolorization of Direct Blue 15 by Fenton/Ultrasonic Process Using a Zero Valent Iron Aggregate Catalyst”, Ultrasonics Sonochemistry, No. 20, sf. 970-977.
  • Zhou T., Lu X., Wang J., Wong F. S., Li Y. (2009): “Rapid Decolorization and Mineralization of Simulated Textile Wastewater in a heterogeneous Fenton Like System With/Without External Energy”, Journal of Hazardous Materials, No. 165, sf. 193-199.