Alüminyum-Silisyum Alaşımlarının Mikroyapısal ve Mekanik Özelliklerinin T6 Isıl İşlemi ile İyileştirilmesi

Bu çalışmada T6 ısıl işleminin ötektik altı bir alüminyum alaşımı olan AlSi10Mg alaşımının mikroyapısal ve mekanik özellikleri üzerindeki etkileri incelenmiştir. Bu amaçla söz konusu alaşıma ısıl işlem uygulanmaksızın ve T6 ısıl işlemi uygulanarak elde edilen numunelerin mikroyapıları optik ve taramalı elektron mikroskopları ile incelenmiş, ayrıca sertlik ile çekme testleri gerçekleştirilmiştir. Elde edilen sonuçlara göre T6 ısıl işlemi alüminyum matris fazı içerisindeki iğnemsi şekildeki silisyum fazını küresele yakın, çok köşeli tanelere çevirerek alaşımın dendritik mikroyapısını değiştirmektedir. Bu duruma ek olarak sertlik ve çekme dayanımı değerlerinde sırasıyla %39,16 ve %40,77 oranında artış meydana gelmiştir.

Improving Microstructural and Mechanical Properties of Aluminum-Silicon Alloys Using T6 Heat Treatment

In this study the effect of T6 heat treatment on the microstructural and mechanical properties of hypoeutectic AlSi10Mg aluminum alloy was investigated. For this purpose, microstructures of untreated and T6 heat treated alloy were characterized by optical and scanning electron microscopes. Also, hardness and tensile tests were carried out. According to the obtained results acicular eutectic silicon phase in the matrix transformed into near globular-polygonal grains by the effect of T6 heat treatment and the dendritic microstructure of the alloy altered. In addition that the hardness and tensile strength values increased by 39,16% and 40,77% respectively.

___

  • [1] Rooy, E. L., 1990. Introduction to Aluminum and Aluminum Alloys. Zorc, T. B., Henry, S. D., ASM Handbook Volume 2 Properties and Selection: Nonferrous Alloys and Special Purpose Materials, ASM International, Ohio, 1328s.
  • [2] King, J. F., 2001. The Aluminium Industry. Woodhead Publishing Limited, Cambridge, 340s.
  • [3] Dwight, J. 2002. Aluminium Design and Construction. Taylor & Francis e-Library, Newyork, 320s.
  • [4] Sigworth, G. K., Fundamentals of Solidification in Aluminum Castings. International Jornal of Metalcasting, Cilt. 8, s 7-20. DOI: 10.1007/BF03355567
  • [5] Mohamed, A. M., Samuel, F. H., 2012. A Review on the Heat Treatment of Al-Si-Cu/Mg Casting Alloys. ss 55-72. Czerwinski, F., Heat Treatment - Conventional and Novel Applications, InTech, 420s. DOI: 10.5772/2798
  • [6] Pio, L. Y., 2011. Effect of T6 Heat Treatment on the Mechanical Properties of Gravity Die Cast A356 Aluminium Alloy, Journal of Applied Sciences, Cilt. 11, s. 2048-2052. DOI: 10.3923/jas.2011.2048.2052
  • [7] Möller, H., Govender, G., Stumpf, W. E., 2008. The T6 Heat Treatment of Semi-Solid Metal Processed Alloy A356, The Open Materials Science Journal, Cilt. 2, s. 6-10. DOI: 10.2174/1874088X00802010006
  • [8] Shi, Z., Wang, Q., Shi, Y., Zhao, G., Zhang, R., 2015. Microstructure and Mechanical Properties of Gd-Modified A356 Aluminum Alloys, Journal of Rare Earths, Cilt. 33, s. 1004-1009. DOI: 10.1016/S1002-0721(14)60518-4
  • [9] Geiser, W., 1982. Aluminium Alloys Tables. 7th, Alcan S. A., Zurich.
Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi-Cover
  • ISSN: 1302-9304
  • Yayın Aralığı: Yılda 3 Sayı
  • Başlangıç: 1999
  • Yayıncı: Dokuz Eylül Üniversitesi Mühendislik Fakültesi