Tek ve İki Bina Etrafındaki Rüzgar Etkilerinin Sayısal Olarak İncelenmesi

Bu çalışmada, tek ve iki bina modeli için rüzgar yükünün etkileri sayısal olarak incelenmiştir. Bina modelleri etrafındaki akış alanları üç boyutlu ve zamandan bağımsız olarak FLUENT paket programı ile hesaplanmıştır. Sayısal çözümlemede Sivas ili için atmosferik sınır tabaka hız profili oluşturulmuş ve RNG k-? türbülans modeli kullanılmıştır. Analizler sonucunda akım çizgileri, hız vektörleri, ortalama hız ve türbülans kinetik enerji dağılımları ile model yüzeylerinde ortalama basınç katsayısı dağılımları hesaplanmıştır. İki bina düzenlemesi için negatif basınç katsayılarının tekli binadan daha yüksek olduğu görülmüştür

Numerical Analysis of Wind Effect Around Single and Two Buildings

In this study, effects of wind load for the a single and two building arrangement is investigated numerically. Flow fields around building models are calculated by FLUENT software package in three dimension and independent of time. In numerical analysis the atmospheric boundary layer velocity profile was created for Sivas province and RNG k-ɛ turbulence model was used. As a result of analysis, streamlines, velocity vectors, mean velocity and turbulence kinetic energy distribution and mean pressure coefficient the patterns of models were calculated. It is seen that the negative pressure coeefficients for the two-building arrangement is larger than that for the single building

___

  • 1. Blocken, B., Carmeliet, J., Stathopoulos, T., 2007. CFD Evaluation of Wind Speed Conditions in Passages Between Parallel Buildings - Effect of Wallfunction Roughness Modifications for the Atmospheric Boundary Layer Flow, Journal of Wind Engineering and Industrial Aerodynamics, 95, 941–962.
  • 2. Özmen, Y., Baydar E., Van Beeck J.P.A.J., 2016. Wind Flow Over the Low-Rise Building Models with Gabled Roofs Having Different Pitch Angles. Building and Environment, 95, 63-74.
  • 3. Kaydok, T., 2014. Farklı Kesitlere Sahip Yüksek Binalar Üzerinde Türbülanslı Akışların Sayısal İncelenmesi. K.T.Ü. Fen Bilimleri Enstitüsü (Yüksek Lisans Tezi), Trabzon 94.
  • 4. Hunte, S., 2010. Testing the Application of CFD for Building Design. Delft University of Technology (Master Thesis), Netherland.
  • 5. Tutar, M., Oğuz, G., 2002. Large Eddy Simulation of Wind Flow Around Parallel Buildings with Varying Configurations. Fluid Dynamics Research, 289-315.
  • 6. Kanbur, B.B., Pınarbaşı, A., Koca, A.İ., 2015. Aynı Bölgede Bulunan Yüksek ve Alçak Katlı Binalar Üzerindeki Rüzgar Yükleri Etkisinin İncelenmesi. Tesisat Mühendisliği, 146, 30-41.
  • 7. Gousseau, P., Blocken, B., Stathopoulos, T., 2011. CFD Simulation of Nearfield Pollutant Dispersion on a High Resolution Grid: A Case Study by LES and RANS for a Building Group in Downtown Montreal. Atmospheric Environment, 45, 428-438.
  • 8. Braun, A.L., Awruch, A.M., 2009. Aerodynamic and Aeroelastic Analyses on the CAARC Standard Tall Building Model Using Numerical Simulation. Computers and Structures, 87, 564-581.
  • 9. Nozawa, K., ve Tamura, T., 2002. Large Eddy Simulation of the Flow Around a Low Rise Building Immersed in a Rough-wall Turbulent Boundary Layer. Journal of Wind Engineering and Industrial Aerodynamics, 90, 1151–1162.
  • 10. ANSYS 14, 2011. User Guide.
Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi-Cover
  • ISSN: 1019-1011
  • Yayın Aralığı: Yılda 4 Sayı
  • Başlangıç: 1986
  • Yayıncı: ÇUKUROVA ÜNİVERSİTESİ MÜHENDİSLİK FAKÜLTESİ