Hata Türleri ve Etkileri Analizinin, HTEA, Tekstil Boya-Terbiye İşletmelerinde Kullanımı

Tekstil sektöründe, ürünlerin kalitesi ve süreçlerin güvenilirliği çok önemlidir. Kalite güvencesini tahmin için yöntemler hala çok yaygın değildir. HTEA (Hata Türleri ve Etkileri Analizi) analiz ve kalite güvencesi potansiyel arızaları ve hasarları önlemek için önemli bir teknik metottur. HTEA süreci analiz eder ve başarısızlıkları, kusurları önlemek amacıyla riskleri değerlendirir. Bu çalışmada tekstil boya terbiye işletmesine HTEA tekniği uygulanmıştır. Çalışma sonucunda işletmede risk önceliği olan üç hata/kusur türü tespit edilmiştir ve önleyici faaliyetlere karar verilebilmiştir

The Using of Failure Mode and Effects Analysis, FMEA in the Textile Dyeing Finishing Mills

In the textile industry, quality of products and reliability of processes are very important. The methods for estimation of quality assurance still is not common. The FMEA (Failure Mode and Effect Analysis) is an important techical method to prevent potentialt failures and defects in quality assurance. Realibility of products and processes is improve the development and the production procedure. In this study, HTEA technique was applied to a selected textile dyeing finishing mill. At the result of the study, three risky failures/defects was found in the mill and the decision has been given to prevention activities

___

  • 1.Yılmaz B.S.,2000. Hata Türü ve Etki Analizi, Dokuz Eylül Üniversitesi Sosyal Bilimler Enstitüsü Dergisi, Cilt2, Sayı 4
  • 2.Yaylalı Ç.,2008.Kalite İyileştirmede Hata Türleri ve Etkileri Analizi ve Bir Üretim Sürecinde Uygulama, Selçuk Üniversitesi Fen Bilimleri Enstitüsü Endüstri Mühendisliği Anabilim Dalı, Bitirme Tezi
  • 3.Yücel Ö., 2007.Failure Mode and EffectAnalysis in Clothing Production, Tekstil ve Konfeksiyon No:2, pp: 126-131.
  • 4.Kaewsom P., Rojanarowan N., 2014. The Application of FMEA to Reduce Defective Rate from Broken Filament Defects in the Direct Spin Drawing process, IOSR Journal of Engineering(IOSRJEN), Vol. 04, Issue 05, PP 55-58.
  • 5.Özyazgan V., Engin F. Z., 2013.Fmea Analysis and Applicatıons in Knitting Industry, Tekstil ve Konfeksiyon, Vol. 23, No:3, pp:228-232.
  • 6.Gültekin, .C., 2001. Tekstil Terbiyesinde Pamuklu Materyalin Boyanmasında Karşılaşılan Hataların OluşNedenleri ve Giderilme Yöntemleri, Electronic Journalof Textiles, Vol:2, No:1.
Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi-Cover
  • ISSN: 1019-1011
  • Yayın Aralığı: Yılda 4 Sayı
  • Başlangıç: 1986
  • Yayıncı: ÇUKUROVA ÜNİVERSİTESİ MÜHENDİSLİK FAKÜLTESİ