Farklı iki kalgon (sodyum hegzametafosfat)'la yapılan hidrometre analizlerinin karşılaştırılması

Bu çalışmada; ince taneli bir zeminin hidrometre analizlerinde (tane boyu analizleri) iki farklı kalgon kullanılmış ve sonuçlar karşılaştırılmıştır. Elde edilen sonuçlardan kireç çözücü kalgon’la yapılan hidrometre analizi sonucunda elde edilen değerlerin yüksek çıktığı belirlenmiştir. Bunun nedeninin kireç çözücü kalgonun yoğunluğunun yüksek olmasıdır. Kireç çözücü kalgon, su ve zemin numunesi karışımını mikserle karıştırma süresince suyun sıcaklığının ve köpüklenme olayının arttığı da gözlenmiştir.

Comparing of hydrometer analysis done with two different calgon (sodium hexametaphosphate)

In this study, it was used two different calgon in hydrometer analysis (particle size analysis) of a fine particle soil and results were compared. According to results, it was determined that values which obtained at the end of hydrometer analysis done by lime solition was high. Cause of this, density of lime solition calgon is high. It were observed water tempure and foam increase during mixing lime solition calgon, water, and soil sample by mixer.

___

1. Holtz,R. and Kovacs,W.D., “Geoteknik Mühendisliğine Giriş”, (Çeviren: Kayabalı,K.), Gazi Kitabevi, 723s., Ankara, 2002.
2. ASTM D 854-02, “Standard test method for specific gravity of soil solids by water pycnometer”, In: Annual Book of ASTM Standards, Volume 04.08, 93-99, West Conshohocken, PA., 2003.
3. ASTM D 2216-98, “Standard test method for laboratory determination of water (moisture) content of soil and rock by mass”, In: Annual Book of ASTM Standards, Volume 04.08, 219-223, West Conshohocken, PA., 2003.
4. ASTM D 422-63, “Standard test method for particle-size analysis of soils”, In: Annual Book of ASTM Standards, Volume 04.08, 10-17, West Conshohocken, PA., 2003.
5. ASTM D 4318-02, “Standard test method for liquid limit, plastic limit, and plasticity index of soils”, In: Annual Book of ASTM Standards, Volume 04.08, 582-595, West Conshohocken, PA., 2003.
6. ASTM D 2487-00, “Standard practise for classification of soils for engineering purposes (unified soil classification system)”, In: Annual Book of ASTM Standards, Volume 04.08, 248-259, West Conshohocken, PA., 2003.
7. Schmidt,G.C., “Stratigrafic nomenculature of the Adana region petroleum district”, VII:Petroleum Administration Bulletin, Number:6, pp.47-62, Ankara, 1961.
8. Yetiş,C. ve Demirkol,C., “Adana Baseni Batı Kesiminin Detay Jeoloji Etüdü”, MTA Derleme Rapor No:8037, s.138-146, 1986.