Düzlem Çelik Çerçeve Sistemlerin Operasyonel Modal Analizi

Bu çalışmada tek katlı-tek açıklıklı ve üç katlı-tek açıklıklı olmak üzere laboratuarda inşa edilmiş küçük ölçekli çelik çerçevelerin dinamik karakteristikleri nümerik ve operasyonel modal analiz yöntemleri ile belirlenmiştir. Çalışmada ilk olarak çerçeve sistemlerin Sap2000 programında sonlu eleman modelleri oluşturulmuş ve dinamik karakteristikler nümerik olarak elde edilmiştir. Daha sonra sözkonusu çerçeve sistemlerin dinamik karakteristikleri operasyonel modal analiz yöntemi ile belirlenmiştir. Her iki analizden elde edilen sonuçlar karşılaştırıldığında ivmeölçer ağırlıklarının dikkate alınmaması durumunda deneysel ve nümerik olarak elde edilen frekans değerleri arasında önemli farklar oluşmuştur. Fakat sonlu eleman modellemesinde ivme ağırlıkları dikkate alınarak analiz yapıldığında her iki yöntemden elde edilen doğal frekans sonuçların birbiri ile uyumlu olduğu görülmüştür

Operational Modal Analysis of Plane Steel Frame Systems

In this study, the dynamic characteristics of small-scale steel frames of one storey-one bay and three storey-one bay, which were built in the laboratory, were determined by numerical and operational model analysis methods. As a first step, finite element models of the frame system were built by using Sap2000 program, and dynamic characteristics of this system were obtained numerically. Then, the dynamic characteristics of mentioned frame system, is determined by operational modal analysis method. Comparison the results of both analyzes, significant differences between the frequency values, could be obtained in experimentally and numerically form, if ignored weight of the accelerometer. However, carrying out the analysis of finite element modeling considering the weight of acceleration, the natural frequency of the results obtained from both methods were found to be compatible with each other

___

  • 1.Rainieri, C., Fabbrocino, G., 2011.Operational Modal Analysis for the Characterization of Heritage Structures, GEOFIZIKA , 28,pp.109-126.
  • 2.Zhang, L., Brincker, R., Andersen, P. 2005.An Overview of Operational Modal Analysis:Major Development and Issues, Proc. Of the International Modal AnalysisConference, Copenhangen, Denmark, 26-27, April.
  • 3.Molina, F.J., Pascual, R., Golinval, J.C., 2003.Descriptionof the Steelquake Benchmark, Mechanical Systems and Signal Processing,17(1),pp. 77-82.
  • 4.Xiaodon,J., Jiaru,Q., Longhe,X.,2007.Damage Diagnosis of a Two-storey Spatial Steel Braced-frame Model, Structural Control and Health Monitoring, 14, pp.1083-1100.
  • 5.Türker, T., Kartal, M.E., Bayraktar, A., Muvafik,M., 2009. Assessment of Semi-rigid Connections in Steel Structures by Modal Testing, Journal of Constructional Steel Research,65, pp.1538-1547.
  • 6.Türker, T.,Bayraktar, A., 2011. Experimental and Numerical Investigation of Brace Configuration Effects on Steel Structures, Journal of Constructional Steel Research,Cilt 67, 854-65.
  • 7.Davoodi, M.R., Mahdavi, M., Mostafavian, S.A., 2012. Experimental and Analytical Determination of Dynamic Properties of a Steel Frame with Bolted Flange Joints, Proceedings of International Conference on Engineering and Information Technology "ICEIT2012",Toronto, Canada, Sep. 17-18.
  • 8.Gomaa, F., Tayel, M., Kandil, K., Hekal, G., 2012. Validation Study Illustrates the Accuracy of Operational Modal Analysis Identification",International Journal of Emerging Technology and Advanced Engineering, ISSN 2250-2459, 2(11), 658-667.
  • 9.Türker, T., Bayraktar, A., 2013. Finite Element Model Calibration of Steel Frame Buildings with and without Brace, Journal of Constructional Steel Research, 90,pp. 164-173.
  • 10.Dönmez, C., Karakan, E., 2009. Köprülerde Deneysel Modal Analiz Uygulamaları,İMO Teknik Dergi, 4851-4863, Yazı 318.
  • 11.Bendat,J.S., Piersol, A.G., 1986. Random Data: Analysis and Measurement Procedures, John Wiley & Sons, USA.
  • 12.Brincker, R., Zhang, L., Andersen, P., 2000.Output-only Modal Analysis by Frequency Domain Decomposition. in: Proceedings of the ISMA25 Noise and Vibration Engineering, Leuven, Belgium.
  • 13.Bayraktar, A., Türker, T., Altunışık, A.C., Sevim, B., Şahin, A.,Özcan D.M., 2010.Binaların Dinamik Parametrelerinin Operasyonal Modal Analiz Yöntemiyle Belirlenmesi İMO Teknik Dergi, Yazı 337, 5185-5205.
  • 14.Türker, T., 2005. Çelik Çerçeve Sistemlerin Dinamik Karakteristiklerinin Deneysel Modal Analiz Yöntemiyle Belirlenmesi, YüksekLisans Tezi, KTÜ Fen Bilimleri Enstitüsü,Trabzon.
  • 15.CSI, SAP2000 V-14,2009. Integrated Finite Element Analysis and Design of Structures Basic Analysis Reference Manual, Computers and Structures, Inc., Berkeley, CA,USA.
  • 16.ARTeMIS V-5.3,AmbientResponse Testing and Modal Identification Software, Structural Vibration Solutions A/S, Denmark, www.svibs.com.
Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi-Cover
  • ISSN: 1019-1011
  • Yayın Aralığı: Yılda 4 Sayı
  • Başlangıç: 1986
  • Yayıncı: ÇUKUROVA ÜNİVERSİTESİ MÜHENDİSLİK FAKÜLTESİ