Analysis of the Loads Acting on Rotary Kiln & Hydraulic Design

Rotary kilns are the equipment for which crystallization and mixing is carried out with the help of high temperature. In this study, evaluation of replacing the electric motor which was used for moving the pinion gear with a hydraulic motor were carried out. The force and torque value exerts on the gear that provides the rotation of the rotary kiln was calculated analytically. As a result of the calculation, it was concluded that the pinion gear is exposed to 21,208 kN and the torque value is 6097,3 N.mm. By these values, detailed calculations of the hydraulic motor, pump, electric motor, minimum pipe diameter and reservoir capacity which constitute the rest of the system were performed. According to the calculations made, the final system was created by selecting the components to be used in the system.

Döner Fırına Etki Eden Yüklerin Analizi ve Hidrolik Dizayn

Döner fırınlar, yüksek sıcaklık yardımıyla kristalizasyon ve karışım işlemlerinin yapıldığı ekipmanlardır. Bu çalışmada, döner fırını hareket ettiren elektrik motorunun hidrolik bir motor ile değiştirilmesi irdelenmiştir. Döner bir fırının çalışması esnasında fırının dönmesini sağlayan dişlinin maruz kaldığı kuvvet ve tork değeri analitik olarak hesaplanmıştır. Yapılan hesaplama sonucu pinyon dişlinin maruz kaldığı 21.208 kN ve tork değerinin 6097.3 N.mm olduğu sonucuna varılmıştır. Bu değerlere göre sistemin geri kalanını oluşturan hidrolik motorun, pompanın, elektrik motorun, minimum boru çaplarının ve rezervuar kapasitesinin detaylı hesaplamaları gerçekleştirilmiştir. Yapılan hesaplamalara göre sistemde kullanılması gereken bileşenler seçilerek nihai sistem oluşturulmuştur.

___

The Working Principle of Rotary Kiln, https://en.wikipedia.org/wiki/Rotary_kiln.

Sew Eurodrive Catalog, Rotary Kiln, Segmented Girth Gears, https://www.sew- eurodrive.kz/solutions/solutions_with_industri al_gear_units/grinding_breaking_and_pulveri zing/rotary_kiln/rotary_kiln.html.

Sew Eurodrive Catalog, Industrial Gear Units: Bevel-Helical Gear Units X. Series Bucket Elevator Drives, Edition 04/2012.

Ramanenka, D., 2015. Numerical Evaluation of Brick Lining Status in Rotary Kilns, Licentiate Thesis, Lulea University of Technology, Sweden.

Versteeg, G.F., Kuipers, J.A.M., Heesink, A.B.M., 2001. Modelling of Rotary Kilns, University of Twente, The Netherlands.

Jörg, G., Sturm, P., Krüger, J., Reuter, M.A., Kögler, C., Probst, Thomas T., 2005. Metallurgical Furnaces. John Wiley & Sons.

Prof. K.Gopinath & Prof. M.M.Mayuram, Machine Design II, Indian Institute of Technology Madras, India.

Güven, A.K., 2001. Hidrolik Yağların Ana Fonksiyonları ve Hidrolik Yağ Seçimi, II. Ulusal Hidrolik Pnömatik Kongresi ve Sergisi, İzmir.

Bringas J., 2004. Handbook of Comparative World Steel Standards Third Edition, USA.

Australian Pump Manufacturers' Association,https://caridokumen.com/downloa d/australian-pump-handbook-_5a44c603 b7d7bc7b7a85091f_pdf, November 2018.

Menezes, P.L., Ingole, S., Nosonovsky, S., 2013. Tribology for Scientist and Engineers: From Basics to Advanced Concept, New York.

Renolin, Product Program Hydraulic Fluids, FUCHS Industrial Lubricants.

Parker Hannifin Corporation, High Torque Radial Piston Motors MR Type Catalogue.
Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi-Cover
  • ISSN: 1019-1011
  • Yayın Aralığı: Yılda 4 Sayı
  • Başlangıç: 1986
  • Yayıncı: ÇUKUROVA ÜNİVERSİTESİ MÜHENDİSLİK FAKÜLTESİ