PİROFİLLİT CEVHERİNDEN ASİT LİÇİ YÖNTEMİYLE ALÜMİNYUM KAZANIMINA AKTİVASYONUN ETKİSİ
Bu çalışmada, Pütürge (Malatya) pirofillit yatağından alınan %23,6 Al2O3 içerikli cevherden asit
Anahtar Kelimeler:
Pirofillit, Alüminyum, Asit liçi, Kalsinasyon, Aşırı öğütme
EFFECT OF ACTIVATION ON ALUMINUM RECOVERY FROM PYROPHYLLITE ORE BY ACID LEACHING
In this study, effect of activation conditions on the recovery of aluminum (Al) obtained by acidleaching from Pütürge (Malatya) pyrophyllite ore containing 23.6% Al2O3 was investigated. In thiscontext, the initially non-activated ore and later activated ore samples using calcining and intensivemilling were leached with HCl, separately. According to the experimental results, Al-recovery inthe leachate for the raw, calcined and intensively milled ore samples were found to be 10.57%,33.63% and 86.5%, respectively. It was also found that there was not sufficient dilation betweenthe clay layers during calcination and the porous structure could not be obtained, also the newmineral phases which resist to dissolution in acidic media were formed at high temperatures. Forthis reason, the aluminum recovery of thermally activated ore was relatively low. However, it wasconfirmed that mechanical activation by intensive milling led to amorphization of clay minerals,and thus, the mechanical activation significantly improved the dissolution behavior of aluminum.As a result of this study, it is concluded that while Al recovery is slightly increased by thermalactivation, it is dramatically increased by mechanical activation.
Keywords:
Pyrophyllite, Aluminum, Acid leaching, Calcination, Intensive milling,
___
- Al-Zahrani, A.A., Abdul-Majid, M.H., 2009. Extraction of Alumina from Local Clays by Hydrochloric Acid Process. Journal of King Abdulaziz University: Engineering Sciences, 20(2), 29-41.
- Bazin, C., K. El-Ouassiti, V. Ouellet., 2007. Sequential Leaching for the Recovery of Alumina from a Canadian Clay. Hydrometallurgy 88, 196–201.
- Barry T. S., Uysal T., Erdemoğlu M., Birinci M., 2019. Thermal and Mechanical Activation in Acid Leaching Processes of Non-bauxite Ores available for Alumina Production-A Review, Mining, Metallurgy&Exploration,https://doi.org/10.1007/s42461- 018-0025-7.
- Bengtson, K.B., 1979. A Technological Comparison of Six Processes for the Production of Reduction Grade Alumina from Non-bauxitic Raw Materials. In: Peterson, W.S. (Ed.), Light Metals, Wiley-VCH, pp. 217–312.
- Bozkaya, Ö., Yalçın H., Başıbüyük, Z., Bozkaya, G., 2007. Metamorphic-Hosted Pyrophyllite and Dickite Occurrences from the Hydrous Al-Silicate Deposits of the Malatya-Pütürge Region, Central Eastern Anatolia, Turkey. Clays and Clay Minerals, 55, 423–442.
- Cohen, J., Mercier, H., 1976. Recovery of Alumina from Non-bauxite Aluminum-bearing Raw Materials, Société Aluminium Pechiney, Light Metals, Wiley-VCH.
- Daniels A. L., Muzenda E., 2012. Recovery of Aluminium Oxide from Flint Clay through H2 SO4 Leaching. Proceedings of the World Congress on Engineering, WCE 2012, July 4 - 6, London, U.K.
- Erdemoğlu, M., 2009. Carbothermic Reduction of Mechanically Activated Celestite. International Journal of Mineral Processing, 92, 144-152.
- Erdemoğlu, M., Birinci, M., Uysal T., Porgalı E., 2018. Acid Leaching Performance of Mechanically Activated Pyrophyllite Ore for Al2 O3 Extraction. Journal of Materials Science, 53:13801–13812.
- Flint E. P., Clarke W. F., Newman E. S., Leo Shartsis. D. L., 1946. Bishop and Lansing S. Wells, Extraction of Alumina from Clays and High Silica Bauxites. Journal of Research of The National Bureau of Standards, Volume 36.
- Habashi, F., 1999. Textbook of Hydrometallurgy (İkinci baskı). Quebec, Kanada: Metallurgie Extractive Quebec.
- Habashi, F., 1997. Handbook of Extractive Metallurgy, Volume 2. Heidelberg, Germany: Wiley-VCH.
- Özdemir, M., Çetişli, H., 2005. Extraction Kinetics of Alunite in Sulphuric Acid and Hydrochloric Acid. Hydrometallurgy, 76, 217-224.
- Sawyer, D.L., Turner, T.L., Hunter, D.B., 1983. Alumina Mini-Plant Operation-Overall Mass Balance for Clay HCl Acid Leaching. U.S. Bureau of Mines. Report No 8759, 29 pp.
- Temuujin, J., Okada, K., Jadambaa, T.S., MacKenzie, K.J.D., Amarsanaa, J., 2003. Effect of Grinding on the Leaching Behaviour of Pyrophyllite. Journal of European Ceramic Society, 23(8), 1277-1282.
- Uysal T., Mutlu H.S., Erdemoğlu M., 2016. Effects of Mechanical Activation of Colemanite (Ca2 B6 O11.5H2 O) on its Thermal Transformations. International Journal of Mineral Processing 151, 51-58.
- Uysal, T., 2018. Asit Liç Yöntemi ile Pirofillit Cevherinden Alümina Üretiminde Aktifleştirme Koşullarının Araştırılması, Doktora Tezi, İnönü Üniversitesi.
- Warris C.J., McCormick, P. G., 1997. Mechanochemical Processing of Refractory Pyrite. Minerals Engineering, 10, 1119-1125.
- World Aluminium, http://www.world aluminium.org/ statistics/alumina-production. Son Erişim Tarihi: 11 Aralık 2018.
- Yao, Z.T., Xia, M.S., Sarker, P.K., Chen, T., 2014. A Review of the Alumina Recovery from Coal Fly Ash, with a Focus in China. Fuel, 120, 74-85.
- ISSN: 2564-7024
- Yayın Aralığı: Yılda 4 Sayı
- Yayıncı: TMMOB Maden Mühendisleri Odası
Sayıdaki Diğer Makaleler
KÖMÜRÜN KENDİLİĞİNDEN YANMASI VE ETKİLEYEN FAKTÖRLER
PİROFİLLİT CEVHERİNDEN ASİT LİÇİ YÖNTEMİYLE ALÜMİNYUM KAZANIMINA AKTİVASYONUN ETKİSİ
Turan UYSAL, Murat ERDEMOĞLU, Mustafa BİRİNCİ
ÇİMENTO ÜRETİMİNDE KİL TAŞINA ALTERNATİF BİR HAMMADDE: META ŞİST