MUSKOVİTİN KARIŞTIRMALI BİLYALI DEĞİRMENDE YAŞ ÖĞÜTÜLMESİNDE ÖĞÜTME YARDIMCILARININ ETKİSİ
Öz
Bu çalışmada, muskovitin karıştırmalı bilyalı değirmende mikronize boyuta (d50: 15 μm) yaş
___
- Altun O., Benzer H., Toprak A., Enderle U., 2015.
Utilization of Grinding Aids in Dry Horizontal
Stirred Milling. Powder Technology, 286, 610-615.
- Ateşok, G., Mütevvelioğlu, N. A., Dinçer, H., Boylu,
F., 2005. Bazı Dağıtıcı Kimyasalların Kömürlerin
Öğütülebilirliğine Etkisi. Bilimsel Madencilik Der
-
gisi, 44(2), 25-35.
- Austin, L.G., Klimpel, R. R., Luckie, P. T., 1984.
Process Engineering of Size Reduction: Ball Mill
-
ing. SME, New York, 561 p.
- Bernhardt, C., Reinsch, E., Husemann, K., 1999.
The Influence of Suspension Properties on Ul
-
tra-Fine Grinding in Stirred Ball Mills. Powder
Technology, 105, 357-361.
- Cayirli, S., Gokcen, H.S., Ucbas, Y., Kayaci, K.,
2014. Fine Grinding of Mica. 14
th
International
Mineral Processing Symposium. Kuşadası, Tur
-
key, 39-43.
- Chevalier, M.D., 2008. Effect of Microwave Irra
-
diation on Aspect Ratio of Treated Mica. M.Sc.
Thesis, Dalhousie University, Nova Scotia, Can
-
ada.
- Choi, H., Lee, W., Kim, S., 2009. Effect of Grind
-
ing Aids on the Kinetics of Fine Grinding Energy
Consumed of Calcite Powders by a Stirred Ball
Mill. Adv. Powder Technol., 20(4), 350–354.
- Choi, H., Lee, W., Kim, D.U., Kumar, S., Kim, S.S.,
Chung, H.S., Kim, J.H., Ahn, Y.C., 2010. Effect of
Grinding Aids on the Grinding Energy Consumed
during Grinding of Calcite in a Stirred Ball Mill.
Miner. Eng., 23(1), 54–57.
- Çayırlı, S., 2014. Mikanın Karıştırmalı Bilyalı
Değirmende Öğütülmesinde Öğütme Parame
-
trelerinin Etkisinin Araştırılması. Doktora Tezi, Es
-
kişehir Osmangazi Ü. Fen Bil. Ens., 160 s.
- Dikmen, S., ve Ergün, Ş.L., 2004. Karıştırmalı Bil
-
yalı Değirmenler. Madencilik Dergisi, 43(4), 3-15.
- El-Shall, H., Somasundaran, P., 1982. Mecha
-
nisms of Grinding Modification by Chemical Ad
-
ditives: Organic Reagents. Annual Meeting of
AIME, Dallas, Texas, 22 p.
- El-Shall, H., Somasundaran, P., 1984. Physi
-
co-Chemical Aspects of Grinding: A Review of
Use of Additives. Powder Technology, 38, 275-
293.
- Gokcen, H.S., Cayirli, S., Ucbas, Y., Kayaci, K.,
2015. The Effect of Grinding Aids on Dry Micro
Fine Grinding of Feldspar. International Journal of
Mineral Processing, 136, 42-44.
- Hanna, K. M., Gamal, A. E., 1977. The Effect of
Dispersing Agents on Fine Grinding of Limestone.
Powder Technology, 17(1), 19-25.
- He, M., Wang, Y., Forssberg, E., 2004. Slurry
Rheology in Wet Ultrafine Grinding of Industrial
Minerals: A Review. Powder Technology, 147,
94–112.
- He, M., Wang, Y., Forssberg, E., 2006. Parame
-
ter Effects on Wet Ultrafine Grinding of Limestone
through Slurry Rheology in a Stirred Media Mill.
Powder Technology, 161(1), 10-21.
- Jimenez, J. L. S., 1981. A Detailed Study on
Stirred Ball Mill Grinding. Ph.D. Dissertation, De
-
partment of Metallurgy and Metallurgical Engi
-
neering, The University of Utah, 211 p.
- Katsioti, M., Tsakiridis, P.E., Giannatos, P., Tsi
-
bouki, Z., Marinos, J., 2009. Characterization of
Various Cement Grinding Aids and their Impact on
Grindability and Cement Performance. Construc
-
tion and Building Materials, 23(5), 1954-1959.
- Klimpel, R., Manfroy, W., 1977. Development of
Chemical Grinding Aids and their Effect on Se
-
lection-for-Breakage and Breakage Distribution
Parameters in the Wet Grinding of Ores. XIIth Int.
Min. Proc. Cong., Sao Paulo, Brazil.
- Klimpel, R. R., 1999. The Selection of Wet Grind
-
ing Chemical Additives based on Slurry Rheology
Control. Powder Technology, 105, 430–435.
- Lowrison, G. C., 1979. Crushing and Grinding.
CRC Press Inc., Cleveland, OH, 60 p.
- Orumwense, O. A., Forssberg, E., 1992. Super
-
fine and Ultrafine Grinding - A Literature Survey.
Mineral Processing and Extractive Metallurgy Re
-
view, 11, 107-127.
- Özkan, A., Yekeler, M., 2001. Palp Reolojisinin
Öğütme İşlemine Etkisi ve Kontrolü. Madencilik
Dergisi, 40(1), 40-47.
- Rehbinder, P. A., 1931. Hardness Reduction
through Adsorption of Surface Active Agents.
Physik, V., 72, 191-205.
- Reinisch, E., Bernhardt, C., Husemann, K., 2001.
The Influence of Additives during Wet Ultra-Fine
Grinding in Agitator Bead Mills: Part 1. General
Principles and Experimental. Ceramic Forum In
-
ternational: Berichte der Deutschen Keramischen
Gesellschaft, 78(3), E38-E42.
- Rose, H. E., Sullivan, R. M. E., 1958. A Treatise
on the Internal Mechanics of Ball, Tube, and Rod
Mills. Chemical Publishing Company, New York,
NY.
- Savage, K. I., Austin, L. G., Sun, S. C., 1974. Ef
-
fect of the Environment during the Ultrafine Com
-
minution of Silicon Carbide in a Laboratory Vibra
-
tory Mill. Trans. AIME, 225, 89-96.
- Somasundaran, P., El-Shall, H., 1983. Mecha
-
nochemical Effects in Ultrafine Grinding. SME-
AIME, Annual Meeting, Atlanta, Georgia.
Toprak, N.A., Altun, O., Aydogan, N., Benzer, H.,
2014. The Influences and Selection of Grinding
Chemicals in Cement Grinding Circuits. Con
-
struction and Building Materials, 68, 199-205.
- Toprak, N.A., Altun, O., Benzer, H., 2018. The Ef
-
fects of Grinding Aids on Modelling of Air Clas
-
sification of Cement. Construction and Building
Materials, 160, 564-573.
- Toraman, O. Y., 2015. Karıştırmalı Bilyalı Değir
-
mende Çok İnce Yaş Öğütme: Bölüm: II. Palp Re
-
olojisi ve Duraylılık. Madencilik, 54(1), 25-36.
- Wang, Y., Forssberg, E., 2007. Enhancement of
Energy Efficiency for Mechanical Production of
Fine and Ultra-Fine Particles in Comminution.
China Particuology, 5, 193-201.
- Westwood, A. R. C., Goldheim, D. L., 1968. Oc
-
currence and Mechanism of Rehbinder Effects in
CaF
2
. J. Appl. Physics, 39(7), 3401-3405.
Willett, J.C., 2012. Mica. Minerals Yearbook,
USGS.
- Yue, J., Klein, B., 2004. Influence of Rheology on
the Performance of Horizontal Stirred Mills. Min
-
erals Engineering, 17, 1169–1177.
- Zheng, J., Harris, C. C., Somasundaran, P., 1997.
The Effect of Additives on Stirred Media Milling of
Limestone. Powder Technology, 91, 173-179.
- Zhou, Z., Scales, P. J., Boger, D. V., 2001. Chem
-
ical and Physical Control of the Rheology of Con
-
centrated Metal Oxide Suspensions. Chemical
Engineering Science, 56, 2901-2920.