Mekanize Kazıda Grizu Patlamaları

Madencilikte son yıllarda mekanize kazı çalışmalarının artması ile birlikte, metalin kayaca sürtünmesi sonucu oluşan grizu patlamaları önem kazanmıştır. Bu tür patlamaları etkileyen parametreleri üç grupta toplamak mümkündür. Bunlar: — Patlayıcı gaz karışımı ve ateşleyici yüzeyin özellikleri, — Kayaç cinsi, — Kesici uçlar ve kazı işleminin uygulanışı ile ilgili özelliklerdir. Patlamanın meydana gelmesi için ilk koşul, ocak havasına yeterli oranda patlayıcı gazın karışmasıdır. Madencilik çalışmaları sırasında tehlike yaratan, genellikle metan gazı olup; hidrojen, etan, propan gazlarının varlığı, karışımın alt patlaması sınırını dü­ şürmektedir. Kayaç cinsi çok önemli bir faktördür. Kayacın içerdiği kuvars miktarı ve tane boyutu arttıkça, patlama olasılığı fazlalaşmaktadır. Kesici uçların aşınması ve kesme hızının yükseltilmesi de patlama tehlikesini yükseltici rol oynamaktadır. Yapılan araştırmalar, kesici uçların ve kesilen kayacın su püskürtülerek soğutulması yoluyla, patlama olasılığının büyük ölçüde azaltılabileceğini ortaya koymuştur.

The Methane Explosions in Mechanized Excavations

During the last few years, parallel to the development of mechanized excavation workings, the methane explosions resulting from the friction between rock and metal surfaces has gained importance. Parameters effecting these type of explosions can be classified in three following groups. — The properties of explosive gas mixture and ignition surfaces, — Rock type, — The properties related with the application of excavation process and cutter bits. The first condition for the explosion to occur is the mixing of explosive gas to the mine air in certain proportions. Generally the methane is the cause of danger during the mine workings. The existance of hydrogen, ethane and prophane gases; however, decreases the lower explosion limit of the mixture. Rock type is also an important factor. As the quartz content and the particle size of rock gets higher, the possibility of explosion increases. Wearing of bits and the increment of cutting speed plays an important role in increasing the danger. It is determined that cooling of bits and rock excavated using water sprays decreases the possibil ity of explosions.