LAVVAR TESİSİ BESLEME MALI, ARA ÜRÜN VE ATIĞININ AĞIR METALLERİN UZAKLAŞTIRILMASINDA ADSORBENT OLARAK KULLANIMI

Bu çalışmada, G.L.İ. Ömerler lavvarına ait besleme malı, ara ürün ve atık kullanılarak Pb ve Cu ağır metal adsorpsiyonuna tane irilik dağılımının etkisi araştırılmıştır. Bu amaçla, besleme malı ve ara ürün azot ortamında beş farklı boyuta öğütülmüş (d80=0,600, 0,355, 0,250, 0,106 ve 0,063 mm), atık ise orijinal formu ile birlikte yedi farklı tane boyu aralığına (d60=0,063 mm orijinal form, -1+0,600, -0,600+0,355, -0,355+0,250, -0,250+0,106, -0,106+0,063 ve -0,063 mm) ayrılmıştır. Bu numuneler aynı deney koşullarında adsorpsiyon deneylerine tabi tutulmuşlardır. Deney sonuçları; her iki metalin de adsorplanmaları için en uygun tane iriliğinin besleme malı için d80=0,063 mm, ara ürün için d80=0,106 mm, atık numunesi için ise orijinal tane dağılımının (d60=0,063 mm) olduğunu göstermiştir. Bununla birlikte, atık numunesinin Pb için 9,30 mg/g, Cu için 7,69 mg/g metal iyon adsorplama değerleri ile öne çıktığı tespit edilmiştir.

Removal of Heavy Metal Ions Using Coal Washing Plant’s Feed Material, Intermediate Product and Tailings as Adsorbents

In this study, the effect of particle size distribution on the adsorption of Pb and Cu heavy metals was investigated by using G.L.İ. Ömerler Coal Washing Plant’s feed material, intermediate product and tailings. For this purpose, feed material and intermediate product were ground down to five different finenesses (d80=0,600, 0,355, 0,250, 0,106 and 0,063 mm) in nitrogen environment, and the tailings having the original d80 of 0,063 mm was separated into seven size fractions (-1+0,600, -0,600+0,355, -0,355+0,250, -0,250+0,106, -0,106+0,063 and -0,063 mm). Then, the samples were subjected to adsorption tests under the same experimental conditions. The test results showed that the optimum size for the adsorption of the two heavy metals was d80=0,063 mm for the feed sample, d80=0,106 mm for the intermediate product and its original size (d60=0.063 mm) for the tailings. Furthermore, It was determined that the tailings sample took priority with 9,30 mg/g and 7,69 mg/g metal adsorption capacity for Pb and Cu, respectively.