LABORATUVAR ÇALIŞMALARINA BAĞLI OLARAK KAYAÇLARIN P-DALGA HIZI VE SCHMIDT ÇEKİCİ SERTLİĞİ DEĞERLERİ KULLANILARAK ÖZGÜL ENERJİNİN TAHMİNİ
Öz
Spesifik enerji değeri mekanik kayaç kazısında kayaçların kesilebilirlik özelliklerini belirlemek için
PREDICTION OF SPECIFIC ENERGY USING P-WAVE VELOCITY AND SCHMIDT HAMMER HARDNESS VALUES OF ROCKS BASED ON LABORATORY STUDIES
___
- Altindag, R., 2003. Correlation of Specific Energy with
Rock Brittleness Concepts on Rock Cutting. J. S. Afr.
Inst. Min. Metall, 103(3), 163-171.
- Altındag, R., 2012. Correlation between P-Wave Velocity
and Some Mechanical Properties for Sedimentary
Rocks. J. S. Afr. Inst. Min. Metall, 112, 229-237.
- Apuani, T., King, M.S., Butenuth, C., De Freitas, M.H.,
1997. Measurements of the Relationship Between Sonic
Wave Velocities and Tensile Strength in Anisotropic
Rock. In: Developments in Petrophysics, Geological
Society Special Publication No. 122, pp. 107-119.
- Aydın, A., Basu, A., 2005. The Schmidt Hammer in Rock
Material Characterization. Eng Geol, 81:1-14.
- Balci, C., Demircin, M.A., Copur, H., Tuncdemir, H.,
2004. Estimation of Specific Energy Based On Rock
Properties for Assessment of Roadheader Performance.
J. S. Afr. Inst. Min. Metall, 11, 633-643.
- Balci, C., Bilgin, N., 2007. Correlative Study of Linear
Small and Full-Scale Rock Cutting Tests to Select
Mechanized Excavation Machines. Int. J. Rock Mech.
Min. Sci, 44, 468-76.
- Bilgin, N., Seyrek, T., Shahriar, K., 1990. Roadheaders
Glean Valuable Tips For Istanbul Metro. Tunnels
Tunnelling, 29-32.
- Bilgin, N., Balci, C., Eskikaya, S., Ergunalp, D., 1997a.
Full Scale and Small Scale Cutting Tests For Equipment
Selection In A Celestite Mine. In: Strakos, V. et al. (eds.)
6th International Symposium on Mine Planning and
Equipment Selection. Balkema, Rotterdam, pp. 387-
392.
- Bilgin, N., Kuzu, C., Eskikaya, S., 1997b. Cutting
Performance of Jack Hammers and Roadheaders In
Istanbul Metro Drivages. In: Golser, J., Hinkel, W.J.,
Schubert, W. (eds.) In: Proceedings World Tunnel
Congress ‘97. Tunnels for People, Vienna, pp. 455-460.
- Bilgin, N., Dincer, T., Copur, H., 2002. The Performance
Prediction of Impact Hammers from Schmidt Hammer
Rebound Values in Istanbul Metro Tunnel Drivages.
Tunnelling and Underground Space Technol, 17 (3),
237-247.
- Boadu, F.K., 2000. Predicting the Transport Properties
of Fractured Rocks from Seismic Information: Numerical
Experiments. Journal of Applied Geophysics, 44:103-13.
- Brich, F., 1960. The Velocity of Compressional Waves
in Rocks to 10 kbars. Part 1. Journal of Geophysical
Research, 65, 1083-1102.
- Cobanoğlu, İ., Celik, S.B., 2008. Estimation of Uniaxial
Compressive Strength from Point Load Strength,
Schmidt Hardness and P-Wave Velocity. Bull Eng Geol
Environ, 67, 491-498.
- Chrzan, T., 1997. The Determination of Rocks Mechanical
Properties with the Use of Ultrasounds. In: Strakos V,
Kebo V, Farana L, Smutny L, editors. Proceedings of
the 6th International Symposium on Mine Planning and
Equipment Selection, Balkema, Rotterdam, pp. 315-
318.
- Comakli, R., Kahraman, S., Balci, C., 2014. Performance
Prediction of Roadheaders in Metallic Ore Excavation.
Tunnelling and Underground Space Technol, 40, 38-45.
- Copur, H., Tuncdemir, H., Bilgin, N., Dincer, T., 2001.
Specific Energy as a Criterion for Use of Rapid
Excavation System in Turkish Mines. Institution Mining
and Metallurgy, Transactions A, Mining Technology,
110(A), 149-157.
- Copur, H., 2010. Linear Stone Cutting Tests With
Chisel Tools For Identification of Cutting Principles and
Predicting Performance of Chain Saw Machines. Int. J.
Rock Mech. Min. Sci., 47, 1, 104-120.
- Copur, H., Balci, C., Tumac, D., Bilgin, N., 2011. Field
and Laboratory Studies on Natural Stones Leading
to Empirical Performance Prediction of Chain Saw
Machines. Int. J. Rock Mech. Min. Sci., 48, 2, 269-282.
- Dursun, A.E., 2012. Cuttability of Limestone Strata at
North-West of Konya City, PhD. Thesis, The Graduate
School of Natural and Applied Science, Selçuk
University, Konya, Turkey, p.286 (In Turkish).
- Dursun, A.E., Gokay, M.K., 2016. Cuttability Assessment
of Selected Rocks Through Different Brittleness Values.
Rock Mech Rock Eng, 49, 1173-1190.
- Farmer, I.W., Hignett, H.J., Hudson, J.A., 1979. The Role
of Geotechnical Factors in the Cutting Performance of
Tunnelling Machines in Rocks. In: Proceedings of the
fourth international congress on rock mechanics of the
ISRM, Montreux, p. 371–7.
- Fowell, R.J., McFeat-Smith, I., 1976. Factors Influencing
the Cutting Performance of a Selective Tunnelling
Machine. in Proc. of Tunnelling’76 Symposium, IMM,
London, March, pp.3-10.
- Gaviglio, P., 1989. Longitudinal Wave Propagation in
a Limestone: The Relationship Between Velocity and
Density. Rock Mech Rock Eng, 22:299-306.
- Gokceoglu, C., 2002. A Fuzzy Triangular Chart to
Predict the Uniaxial Compressive Strength of Ankara
Agglomerates from Their Petrographic Composition.
Eng Geol, 66, 39-51.
- Gokceoglu, C., Zorlu, K., 2004. A Fuzzy Model to Predict
the Uniaxial Compressive Strength and the Modulus
of Elasticity of a Problematic Rock. Engineering
Applications of Artificial Intelligence, 17 (1), 61-72.
- Goktan, R.M., Gunes, N., 2005. A Comparative Study
of Schmidt Hammer Testing Procedures with Reference
to Rock Cutting Machine Performance Prediction. Int. J.
Rock Mech. Min. Sci., 42, 466-477.
- Howarth, D.F., Adamson, W.R., Berndt, J.R., 1986.
Correlation of Model Tunnel Boring and Drilling Machine
Performances with Rock Properties. Int J Rock Mech
Min Sci Geomech Abstr, 23, 171–5.
- Inoue, M., Ohomi, M., 1981. Relation between Uniaxial
Compressive Strength and Elastic Wave Velocity of Soft
Rock. In: Proceedings of the International Symposium
on Weak Rock, Tokyo, pp. 9-13.
- Kahraman, R., 1999. Rotary and Percussive Drilling
Prediction Using Regression Analysis. Int J Rock Mech
Min Sci, 36, 981–9.
- Kahraman, R., Balcı, C., Yazıcı, S., Bilgin, N., 2000.
Prediction of the Penetration Rate of Rotary Blast Hole
Drills Using a New Drillability Index. Int J Rock Mech Min
Sci, 37, 729–43.
- Kahraman, S., Bilgin, N., Feridunoglu, C., 2003.
Dominant Rock Properties Affecting the Penetration
Rate of Percussive Drills. Int J Rock Mech Min Sci, 40,
711–23.
- Kahraman, S., 2001. A Correlation Between P-Wave
Velocity, Number of Joints and Schmidt Hammer
Rebound Number. Int J Rock Mech Min Sci, 38, 729-
733.
- Kahraman, S., 2002a. Estimating the Direct P-Wave
Velocity Value of Intact Rock from Indirect Laboratory
Measurements. Int J Rock Mech Min Sci, 39, 101-104.
- Kahraman, S., 2002b. The Effects of Fracture
Roughness on P-Wave Velocity. Eng Geol, 63:347-350.
- Kahraman, S., 2007. The Correlations Between the
Saturated and Dry P-Wave Velocity of Rocks. Ultrasonic,
46:341-348.
- Kahraman, S., Soylemez, M., Gunaydin, O., and
Fener, M., 2005. Determination of the Some Physical
Properties of Travertines from Ultrasonic Measurement.
Proceedings of 1st International Symposium on
Travertine, Denizli, Turkey, pp. 231-234.
- Kahraman, S., Yeken, T., 2008. Determination of
Physical Properties of Carbonate Rocks from P-Wave
Velocity. Bull Eng Geol Environ, 67, 277-281.
- Karakuş, M., Tutmez, B., 2006. Fuzzy And Multiple
Regression Modelling for Evaluation of Intact Rock
Strength Based On Point Load, Schmidt Hammer and
Sonic Velocity. Rock Mech Rock Eng, 39 (1), 45-57.
- Khandelwal, M., Singh, T.N., 2009. Correlating Static
Properties of Coal Measures Rocks with P-Wave
Velocity. International Journal of Coal Geology, 79, 55-
60.
- Kidybinski, A., 1968. Rebound Number and the Quality
of Mine Roof Strata. Int J Rock Mech Min Sci, 5:283-
291.
- King, M.S., Chaudhry, N.A., Shakeel, A., 1995.
Experimental Ultrasonic Velocities and Permeability for
Sandstones with Aligned Cracks. Int J Rock Mech Min
Sci, 32(2):155-163.
- Kopf, M., Muller, H.J., Gottesmann. B.. 1985. Correlation
between Pyroxene Content and Vp
And Vs
Under High
Pressure. Kapicka, A., Kropacek, V., Pros, Z. (eds.).
Physical properties of the mineral system of the Earth’s
Interior. Union Czech. Math. Phys., Prague, pp. 168-172.
- McFeat-Smith, I., Fowell, R.J., 1977. Correlation of
Rock Properties and The Cutting Performance of
- Tunneling Machines. In Proc. of a Conference on Rock
Engineering, CORE-UK, The University of Newcastle
upon Tyne, 581-602.
- McFeat-Smith, I., Fowell, R.J., 1979. The Selection
and Application of Roadheaders for Rock Tunneling.
Proc. 4th Rapid Excavation and Tunnelling Conference,
Atlanta, AIME, New York, 261-279.
- Poole, R.W., Farmer, I.W., 1978. Geotechnical Factors
Affecting Tunnelling Machine Performance in Coal
Measures Rock. Tunnels and Tunnelling, 27-30.
- Rostami, J., Ozdemir, L., Neil, D., 1994. Performance
Prediction, A Key Issue in Mechanical Hard Rock Mining.
Mining Engineering, November, 1264-1267.
- Schmidt, E., 1951. A Non-Destructive Concrete Tester.
Concrete, 59:34-35.
- Shahriar, K., 1988. Rock Cuttability and Geotechnical
Factors Affecting the Penetration Rates of Roadheaders.
PhD thesis, Istanbul Technical University, p. 241.
- Tarkoy, P.J., Hendron, A.J., 1975. Rock Hardness
Index. US National Science Foundation report NSFRAT-75-030.
- Thill, R.E., Bur, T.R., 1969. An Automated Ultrasonic
Pulse Measurement System. Geophysics. 34, 101-105.
Tuncdemir, H., 2008. Impact Hammer Applications in
Istanbul Metro Tunnels. Tunnelling and Underground
Space Technol, 23, 264-72.
- Vasconcelos, G., Lourenco, P.B., Alves, C.A.S.,
Pamplona, J. 2008. Ultrasonic Evaluation of the Physical
and Mechanical Properties Of Granites. Ultrasonics, 48,
453-466.
- Yagiz, S., 2011. P-Wave Velocity Test for Assessment of
Geotechnical Properties of Some Rock Materials. Bull
Mater Sci., 34, 947–953.
- Young, R.P., Hill, T.T., Bryan I.R., Middleton, R., 1985.
Seismic Spectroscopy in Fracture Characterization.
Quart. J. Eng. Geol. 18, 459-479.
- Tiryaki, B., Dikmen, A., 2006. Effects of Rock Properties
on Specific Cutting Energy in Linear Cutting of
Sandstones By Picks. Rock Mech Rock Eng, 39(2), 89-
120.
- Tumac, D., Bilgin, N., Feridunoglu, C., Ergin, C., 2007.
Estimation of Rock Cuttability from Shore Hardness and
Compressive Strength Properties. Rock Mech Rock
Eng, 40(5), pp. 477-490.
- Tumac, D., 2014. Predicting the Performance of Chain
Saw Machines Based on Shore Scleroscope Hardness.
Rock Mech Rock Eng, 47, 703-715.
- Ulusay, R., Hudson, J., 2007. The Complete ISRM
Suggested Methods For Rock Characterization, Testing
and Monitoring: 1974–2006.” Ankara: ISRM Turkish
National Group.