___

• Aghlmandi Harzanagh, A., Orhan, E.C., Ergun, S.L., 2018. Discrete Element Modelling of Vibrating Screens. Miner. Eng., 121, 107-121.
• Alkhaldi, H., Ergenzinger, C., Fleißner, F., Eberhard, P., 2008. Comparison Between Two Different Mesh Descriptions Used for Simulation of Sieving Processes. Granular Matter., 10 (3), 223-229.
• Balevičius, R., Džiugys, A., Kačianauskas, R., Maknickas, A., Vislavičius, K., 2006. Investigation of Performance of Progrming Approaches and Languages used for Numerical Simulation of Granular Material by the Discrete Element Method. Computer Physics Communications, 175 (6), 404–415.
• Cleary, P.W., 1998. Predicting Charge Motion, Power Draw, Segregation and Wear in Ball Mills Using Discrete Element Methods. Miner. Eng., 11, 1061–1080.
• Cleary, P.W., Morrisson, R., Morrell, S., 2003. Comparison of DEM and Experiment for a Scale Model SAG Mill. Int. J. Miner. Process., 68, 129–165.
• Cleary, P.W., Sinnott, M.D., Morrison, R.D., 2009. Separation Performance of Double Deck Banana Screens - Part 1: Flow and Separation for Different Accelerations. Miner. Eng., 22, 1218–1229.
• Cundall, P.A., Strack, O.D.L., 1979. A Discrete Numerical Model for Granular Assemblies. Géotechnique, 29, 47–65.
• Delaney, G.W., Morrison, R.D., Sinnott, M.D., Cummins, S., Cleary, P.W., 2015. DEM Modelling of Non-Spherical Particle Breakage and Flow in an Industrial Scale Cone Crusher. Miner. Eng., 74, 112–122.
• Elskamp, F., Kruggel-Emden, H., 2014. Review and Benchmarking of Process Models for Batch Screening Based on Discrete Element Simulations. Adv. Powder Technol., 1–19.
• Fernandez, J.W., Cleary, P.W., Sinnott, M.D., Morrison, R.D., 2011. Using SPH One-Way Coupled to DEM to Model Wet Industrial Banana Screens. Miner. Eng., 24, 741–753.
• Gera, D., Gautam, M., Tsuji, Y., Kawaguchi, T., Tanaka, T., 1998. Computer Simulation of Bubbles in Large-Particle Fluidized Beds. Powder Technol., 98, 38–47.
• Goniva, C., Kloss, C., Deen, N., Kuipers, J., Pirker, S., 2012. Influence of Rolling Friction on Single Spout Fluidized Bed Simulation. Particuology, 10 (5), 582-591.
• Kuwabara, G., Kono, K., 1987. Restitution Coefficient in a Collision Between Two Spheres. Jpn. J. Appl. Phys., 26, 1230–1233.
• LAMMPS, 2017. Large-scale Atomic/Molecular Massively Parallel Simulator Documentation. Bağlantı adresi: http://lammps.sandia.gov/doc/Manual.html (erişim tarihi: 10.04.2017).
• Langston, P.A., Tüzün, U., Heyes, D.M., 1995. Discrete Element Simulation of Granular Flow in 2d and 3d Hoppers: Dependence of Discharge Rate and Wall Stress on Particle Interactions. Chem. Eng. Sci., 50, 967–987.
• Liffman, K., Nguyen, M., Metcalfe, G., Cleary, P., 2001. Forces in Piles of Granular Material: An Analytic and 3D DEM Study. Granul. Matter, 3, 165–176.
• Liu, C., Wang, H., Zhao, Y., Zhao, L., Dong, H., 2013. DEM Simulation of Particle Flow on a Single Deck Banana Screen. Int. J. Min. Sci. Technol., 23, 273–277.
• Mio, H., Kano, J., Saito, F., Kaneko, K., 2002. Effects of Rotational Direction and Rotation-to-Revolution Speed Ratio in Planetary Ball Milling. Mater. Sci. Eng., 332, 75–80.
• Mishra, B.K., Mehrotra, S.P., 2001. A Jig Model Based on the Discrete Element Method and its Experimental Validation. Int. J. Miner. Process., 63, 177–189.
• Mishra, B.K., Rajamani, R.K., 1992. The Discrete Element Method for the Simulation of Ball Mills. Appl. Math. Model., 16, 598–604.
• Mular, A.L., Halbe, D.N., Barratt, D.J., 2002. Mineral Processing Plant Design, Practice, and Control. SME, Vancouver, British Columbia.
• Nesbit, P.Q., Moys, M.H., 1998. Load Behaviour in the Hicom Nutating Mill. Miner. Eng., 11, 979–988.
• Orhan, E.C., 2008. Yüksek Alan Şiddetli Kalıcı Mıknatıslı Rulo Tipi Kuru Manyetik Ayırıcıların Ayrık Elemanlar Yöntemi ile Modellenmesi. Doktora Tezi, Hacettepe Üniversitesi Fen Bilimleri Enstitüsü Maden Mühendisliği Bölümü.
• Orhan, E.C., 2018. Endüstriyel Elemenin Sayısal Modellemesi. TÜBİTAK, Proje No: 215M368, Ankara.
• Sinnott, M.D., Cleary, P.W., Morrison, R.D., 2011. Is Media Shape Important for Grinding Performance in Stirred Mills?. Miner. Eng., 24, 138–151.
• Ting, J.M., Corkum, B.T., 1992. Computational Laboratory for Discrete Element Geomechanics. J. Comput. Civ. Eng., 6, 129–146.
• Tung, K.L., Chang, T.H., Lin, Y.-F., Chyang, C.-S., 2011. DEM Simulation of a 3D Vertical Vibratory Screening Process: The Study of a Simulated Woven-Mesh Structure. AIChE J., 57, 918–928.
• Xiao, J., Tong, X., 2012. Particle Stratification and Penetration of a Linear Vibrating Screen by the Discrete Element Method. Int. J. Min. Sci. Technol., 22, 357– 362.
• Yang, R.Y., Zou, R.P., Yu, A.B., 2003. Microdynamic Analysis of Particle Flow in a Horizontal Rotating Drum. Powder Technol., 130, 138–146.
• Yokoyama, T., Tamura, K., Usui, H., Jimbo, G., 1996. Simulation of Ball Behavior in a Vibration Mill in Relation With its Grinding Rate: Effects of Fractional Ball Filling and Liquid Viscosity. Int. J. Miner. Process., 44–45, 413–424.
• Zhang, D., Whiten, W. J., 1996. The Calculation of Contact Forces Between Particles Using Spring and Damping Models. Powder Technology, 88 (1), 59-64.
• Zhao, L., Zhao, Y., Liu, C., Li, J., Dong, H., 2011. Simulation of the Screening Process on a Circularly Vibrating Screen Using 3D-DEM. Min. Sci. Technol., 21, 677–680.