DENİZLİ MOLAS HAVZASINDA BULUNAN SEDİMANTER KAYAÇLARIN CERCHAR VE SHORE SERTLİKLERİNİN TAYİNİ VE BULANIK MANTIK UYGULAMASI
Öz
Bu çalışmada, Denizli ilinin Molas havzasında yapılan iki adet sondaj kuyusundan elde edilen
___
- Al-Ameen, S., Waller, M., 1994. The Influence
of Rock Strength and Abrasive Mineral Content
on the Cerchar Abrasive Index. Eng. Geol., 36,
293–301
- Alber, M., 2008. Stress Dependency of the
Cerchar Abrasivity Index (CAI) and Its Effects
on Wear of Selected Rock Cutting Tools. Tunn.
Undergr. Space Technol., 23, 351–359.
- Alvarez Grima, M., Babuska, R., 1999. Fuzzy
Model for the Prediction of Unconfined
Compressive Strength of Rock Samples.
International Journal of Rock Mechanics and
Mining Science, 36, 339–349
- Atkinson, T., Cassapi, V.B., Singh, R.N., 1986.
Assessment of Abrasive Wear Resistance
Potential in Rock Excavation Machinery.
International Journal of Mining and Geological
Engineering, Technical Note, 3, 151-163
- Bölükbaşı, N., 1986. Yeraltı Kömür ve Ayak
Kazı Mekanizasyonu. TKİ Genel Müdürlüğü
Seminerleri No.4, Mining Eng.Dept. METU,
Ankara
- Cerchar, 1986. Centre d’Etudes et Recherches
de Charbonnages de France. The CERCHAR
abrasiveness index, Verneuil 12S.
- Dahl, F., Bruland, A., Jakobsen, P.D., Nilsen,
B., Grov, E., 2012. Classifications of Properties
Influencing the Drillability of Rocks, Based on
the NTNU/SINTEF Test Method. Tunn Undergr
Space Technol, 28, 150–158
- Finol, J., Guo, Y. K., Jing, X. D., 2001. A Rule Based
Fuzzy Model for the Prediction of Petrophysical
Rock Parameters. Journal of Petroleum Science
and Engineering, 29, 97–113.
- Gokceoglu, C., 2002. A Fuzzy Triangular Chart
to Predict the Uniaxial Compressive Strength of
Ankara Agglomerates from Their Petrographic
Composition. Engineering Geology, 66, 39-51.
- Hamzaban, M.T., Memariana, H., Rostami, J.,
2013. Continuous Monitoring of Pin Tip Wear
and Penetration Into Rock Surface Using a New
Cerchar Abrasivity Testing Device. Rock Mech
Rock Eng
- ISRM, 2007. The ISRM Suggested Methods for
Rock Characterization, Testing and Monitoring,
International Society for Rock Mechanics and
Rock Engineering.
- Kasling, H., Thuro, K., 2010. Determining
Abrasivity of Rock and Soil in the Laboratory. In:
11th IAEG Congress, Auckland, New Zealand,
235.
- Michalakopoulos, T., Anagnostou, V., Bassanou,
M., Panagiotou, G., 2006. The Influence of Steel
Styli Hardness on the Cerchatr Abrasiveness
Index Value. Int J Rock Mech Min Sci, 43, 321-
327.
- Plinninger, R., Kasling, H., Thuro, K., Spaun, G.,
2003. Testing Conditions and Geomechanical
Properties Influencing the Cerchar Abrasiveness
Index (CAI) Value. Int J Rock Mech Min Sci, 40,
259-263.
- Plinninger, R., Kasling, H., Thuro, K., 2004.
Wear Prediction in Hardrock Excavation Using
The Cerchar Abrasiveness Index (CAI). In:
Proceedings of the Eurock 2004 and 53rd
Geomechanics Colloquium, 599-604.
- Rostami, J., Ozdemir, L., Bruland, A., Dahl, F.,
2005. Review of Issues Related to Cerchar
Abrasivity Testing and Their Implications on
Geotechnical Investigations and Cutter Cost
Estimates. In: Proceedings of the RETC, 738-751
- Rostami, J., Ghasemi, A., Gharahbagh, E.,
Dogruoz, C., Dahl, F., 2014. Study of Dominant
Factors Affecting Cerchar Abrasivity Index. Rock
Mechanics and Rock Engineering,47, 1905-1919
- Stanford, J., Hagan, P., 2009. An Assessment
of the Impact of Stylus Metallurgy on Cerchar
Abrasiveness Index. In: Proceedings of the Coal
Operators’ Conference, 348-355.
- Suana, M., Peters, T., 1982. The Cerchar
Abrasivity Index and Its relation to Rock
Mineralogy and Petrography. Rock Mech., 15,
1-7.
- Thuro, K., Singer, J., Kasling, H., Bauer, M.,
2007. Determining Abrasivity with the LCPC
Test. In: Eberhardt E, Stead D, Morrison T
(eds) Proceedings of the 1st Canada–U.S. rock
mechanics symposium, 27.
- West, G., 1989. Rock Abrasiveness Testing for
Tunnelling. Int J Rock Mech Min Sci Geomech
Abstr, 2, 151-160.
- Yarali, O., Yasar, E., Bacak, G., Ranjith, P., 2008.
A Study of Rock Abrasivity and Tool Wear in Coal
Measures Rocks. Int J of Coal Geol., 74, 53-66.