Cevher Hazırlama ve Proses Metalurjisi ile İlgili Anılar 4. BÖLÜM Segregasyon Prosesleri

Bu bölümde, 1923 yılında geliştirilen bakır segregasyon yöntemi ve bu yöntemin refrakter bakır cevherlerinin işlenmesinde kullanılması ile tesis dizaynında karşılaşılan problemler açıklanmıştır.Yöntemin geliştirilmesi ile tesisteki başarısızlıklar ve 1931 yılı ekonomik bunalımı nedeniyle yöntemden vazgeçilmesi detaylandınlmış, marjinal ekonomik olan Moritanya'daki Akjoujt madeninin tekrar canlandırılması konu edilmiştir. Anglo American Corporation, Ltd., U.S. Bureau of Mines ve Mitsui Mining Company Ltd. tarafından geliştirilen yöntemler konu edilmiştir. Kurşun ve bakır-kurşun cevherlerinin segregasyonu ile ilgili denemeler ile nikel segregasyonunun kimyası tartışılmış, çeşitli endüstriyel tesislerin karşılaştırılması yapılmıştır. Sonuç olarak araştırma ve bunu yapanların rolü ile ilgili fikirler ileri sürülmüştür. Refrakter bakır cevherlerinin değerlendirilmesi için geliştirilen "segregasyon prosesi", teorik ve kimyasal açıdan mükemmel ve son derece zekicedir. Ancak tesisin tasarım işletilmesi ilke olarak basit olmakla beraber, uygulamada zordur. Yöntem bir çok metalurjisti yanlış yöne sevketmiş olup 50 yıl sonra şimdi bile başarıyla kullanılabilecekken endüstriyel bir işlem haline gelememiştir.

Memoirs of Milling and Process Metallurgy Segregation Processes

The development, in 1923, of the copper segregation process and its use in the treatment of refractory copper ores are discussed, with the associated problems of plant design. The development of the process and its abandonment because of plant failure and the recession of 1931 are detailed, as is the brief, but marginally economic, revival of the process at the Akjoujt mine in Mauritania. The methods evolved by Anglo American Corporation, Ltd., the U.S. Bureau of Mines and the Mitsui Mining Company, Ltd., are presented. Attempts to segregate lead and copper - lead ores and the chemical theory of nickel segregation are discussed, and various industrial plants are compared. In conclusion comments are offered on the role of research and of those who undertake research. In this, the last paper of this series concerned with aspects of milling and metallurgical research, the evolution of a process for the benéficiation of refractory copper ores - the 'segregation process' - is discussed. From theoretical and chemical standpoints it is brillant and efficient, but the design and operation of a plant, although simple in principle, are difficult in practice. The process has deceived many metallurgists, and even with 50 years of development it has not become an industrial success.