Selman KARAYILMAZLAR, Yıldız ÇABUK, Ayşe ATMACA, Ayşin AŞKIN

ORMAN ÜRÜNLERİ ENDÜSTRİSİNDE LAMİNASYON TEKNİĞİ VE ÖNEMİ

Orman ürünleri endüstrisinde her geçen gün daha yaygın kullanım alanı bulan lamine ağaç malzeme, odun

Anahtar Kelimeler:

Orman ürünleri endüstrisi, Laminasyon

LAMINATION TECHNIQUE AND ITS IMPORTANCE IN LUMBER INDUSTRY

Laminated wood materials, having increasingly been found a very large usage areas nowadays, can be describedas structural material made by bonding wooden layers or veneers in parallel to grain direction. It is not an easyand economical way to use solid wood materials as one piece in large or curved parts. Because, it is not possibleto remove all of the defects which can be knots, checks and abnormalities in grain orientations. Using onewooden piece in curved parts is not economicial because this increases the loss of wood material and also thisdecreases the strength because of having fibers being cut in diagonal direction. In order to eliminate this,lamination technique has been used. Thus, it can be possible to manufacture high quality laminated woodenmaterials with desired shape and dimensions. In this paper, the manufacture, technology and importance oflaminated wooden materials were discussed.

Keywords:

Lumber industry, Lamination,

PDF

___

1. Anonim 1989. Glued Laminated Timber Association, Specifier’s Guide to Glued Laminated Structural Timber, London.
2. ASTM 1984. Standart Method for Establishing Stresses for Structural Glued Laminated Timber, American Society for Testing and Material, D37, Philadelphia.
3. Keskin, H. ve Togay, A. 2004. Lamine Edilmiş Karaçam Odununda Kesiliş Yönünün Eğilme Direnci ve Eğilmede Elastiklik Modülüne Etkileri, Gazi Üniversitesi Endüstriyel Sanatlar Eğitim Fakültesi Dergisi, Sayı:14, ss. 13-25.
4. Hoyle, A. and Woste, B. 1989. Handbook Of Wood And Wood Based Materials, USDAForest Service, Forest Products Laboratory, Madison, USA.
5. Baird, O. 1998. HK-Holz und Kunststoffe Verarbeitung, 6/1998 s. 26-28, Germany.
6. Tokyay, V. 2007.Tutkallı Tabakalanmış Ağaç Teknolojisi Nedir? (www.oranmimarlık.com.tr)
7. Şenay, A. 1996. Lamine Edilmiş Ağaç Malzemenin Özellikleri, İÜ, Fen Bilimleri Enstitüsü.
8. Bozkurt, Y. ve Göker, Y. 1987. Fiziksel ve Mekanik Ağaç Teknolojisi, İÜ Orman Fak. Yayını, No: 3445, İstanbul.
9. Bozkurt, Y., Parlar K. ve Erdin, S. 1987. Fiziksel ve Mekanik Ağaç Teknolojisi, İÜ, Yayın No: 3445, O.F. Yayın No: 388, İstanbul.
10. Göker, Y. 1994. Ahşap Malzemenin Özellikleri, Ahşap Dergisi, Sayı:4, İstanbul.
11. Berkel, A. 1970. Ağaç Malzeme Teknolojisi, Cilt:1, İÜ Yayın No: 1448, Orman Fakültesi, Yayın No: 147, İstanbul.
12. Çolakoğlu, G. 2001. Tabakalı Ağaç Malzeme Teknolojisi Ders Notu, KTÜ, Orman Fakültesi.