Yeniden Yapılandırılabilir Üretim Sistemlerinin ve Tedarikçi Cevap Verebilirliğinin, Ürün Cevap Verebilirliği Üzerindeki Rolü: İmalat Sektöründe Bir Uygulama

İşletmelerin, yeniden yapılandırılabilir üretim sistemlerine ve tedarikçi cevap verebilirliği yeteneğine sahip olması; ani ve öngörülmeyen durumlara tepki verilmesi açısından önem arz etmektedir. Bu çalışmanın amacı, yeniden yapılandırılabilir üretim sistemlerinin ve tedarikçi cevap verebilirliğinin, ürün cevap verebilirliği üzerinde etkisinin olup olmadığını incelemektir. Gerçekleştirilen literatür taraması sonucunda, bu etkinin ele alındığı bir çalışma ile karşılaşılmamıştır. Bu doğrultuda yapılan çalışmanın, ilgili alandaki boşluğu doldurarak, literatüre katkı sağlayacağı düşünülmektedir. Çalışmada, iki ayrı hipotez oluşturularak, bir uygulama gerçekleştirilmiştir. Türkiye’de imalat sektöründe faaliyet gösteren orta ve büyük ölçekli işletmelerin üst düzey yöneticilerinden, 397’sinin katılımıyla anket yapılmıştır. Elde edilen veriler ile güvenilirlik analizi ve yapı geçerliliği test edilerek ulaşılan sonuçlar sunulmuştur. Ayrıca, yapısal eşitlik modeli kullanılarak araştırma modeli sınanmıştır. Hipotez testleri sonucunda, yeniden yapılandırılabilir üretim sistemleri ile ürün cevap verebilirliği arasında olumlu yönde bir ilişki tespit edilmiştir. Tedarikçi cevap verebilirliği ile ürün cevap verebilirliği arasında da olumlu yönde bir ilişki tespit edilerek, hipotezler doğrulanmıştır.

The Role of Reconfigurable Production Systems and Supplier Responsiveness on Product Responsiveness: An Application in the Manufacturing Sector

Having reconfigurable production systems and supplier responsiveness capability is important for businesses in terms of reacting to sudden and unexpected situations. This study aims to analyze whether reconfigurable production systems and supplier responsiveness have an impact on product responsiveness. As a result of the literature search, no study addressing this effect has been found. It is thought that a study conducted in this direction will contribute to the literature, filling the gap in the relevant field. In this study, an application was carried out by developing two separate hypotheses. 397 questionnaires were administered to senior executives of medium and large-sized businesses operating in the manufacturing sector in Turkey. The results obtained by testing the reliability analysis and construct validity with the obtained data are presented. In addition, the research model was tested using the structural equation model. As a result of the hypothesis tests, a positive relationship was found between reconfigurable production systems and product responsiveness. Hypotheses have been verified by detecting a positive relationship between supplier responsiveness and product responsiveness.

Keywords:

Reconfigurable Production Systems Supplier Responsiveness, Product Responsiveness,

PDF

___

Agarwal, A., Shankar, R. ve Tiwari, M. K. (2007). Modeling Agility of Supply Chain. Industrial Marketing Management, 36(4), 443–457. https://doi.org/10.1016/j.indmarman.2005.12.004
Al-Hawajreh, K. M. ve Attiany, M. S. (2014). The Effect of Supply Chain Responsiveness on Competitive Advantage: A Field Study of Manufacturing Companies in Jordan. European Journal of Business and Management, 6(13), 151–162. http://www.iiste.org/Journals/index.php/EJBM/article/view/12700
Atalay, M., Anafarta, N. ve Sarvan, F. (2013). The Relationship Between Innovation and Firm Performance: An Empirical Evidence from Turkish Automotive Supplier Industry. Procedia - Social and Behavioral Sciences, 75(3), 226–235. https://doi.org/10.1016/j.sbspro.2013.04.026
Bateman, N., Stockton, D. J. ve Lawrence, P. (1999). Measuring the Mix Response Flexibility of Manufacturing Systems. International Journal of Production Research, 37(4), 871–880. https://doi.org/10.1080/002075499191571
Bejlegaard, M., Brunoe, T. D., Bossen, J., Andersen, A. L. ve Nielsen, K. (2016). Reconfigurable Manufacturing Potential in Small and Medium Enterprises with Low Volume and High Variety: Pre-design Evaluation of RMS. Procedia CIRP, 51, 32–37. https://doi.org/10.1016/j.procir.2016.05.055
Bellgran, M. ve Säfsten, E. K. (2009). Production Development: Design and Operation of Production Systems. In Journal of Chemical Information and Modeling (Vol. 53, Issue 9). Springer Science & Business Media. http://www.elsevier.com/locate/scp
Bi, Z. M., Lang, S. Y. T., Shen, W. ve Wang, L. (2008). Reconfigurable Manufacturing Systems: The State of the Art. International Journal of Production Research, 46(4), 967–992. https://doi.org/10.1080/00207540600905646
Bortolini, M., Galizia, F. G. ve Mora, C. (2018). Reconfigurable Manufacturing Systems: Literature Review and Research Trend. Journal of Manufacturing Systems, 49, 93–106. https://doi.org/10.1016/j.jmsy.2018.09.005
Can, A. (2013). SSPS ile Bilimsel Araştırma Sürecinde Nicel Veri Analizi. Pegem Akademi Yayıncılık.
Capawa-Fotsoh, E., Mebarki, N., Castagna, P. ve Berruet, P. (2020). A Classification of Reconfigurable Manufacturing Systems. In L. Benyoucef (Ed.), Reconfigurable Manufacturing Systems : From Design to Implementation (pp. 11–29). Springer International Publishing.
Cevher, M. F. (2019). Sosyal Medya Fenomenlerinin Tüketici Algısı ve Satın Alma Niyeti Üzerine Etkisi. Beykent Üniversitesi Sosyal Bilimler Enstitüsü Yayımlanmış Doktora Tezi.
Christopher, M. ve Peck, H. (2004). Building the Resilient Supply Chain. International Journal of Logistics Management, 15(2), 1–28.
Comrey, A. L. ve Lee, H. B. (1992). A First Course in Factor Analysis (Second Edition). Psychology Press. https://doi.org/10.2307/2348352
Çetin, O. ve Altuğ, N. (2005). Çevik Üretim. V. Ulusal Üretim Araştırmaları Sempozyumu, İstanbul Ticaret Üniversitesi, 301–306.
Duclos, L. K.,Vokurka, R. J. ve Lummus, R. R. (2003). A Conceptual Model of Supply Chain Flexibility. Industrial Management and Data Systems, 103(6), 446–456. https://doi.org/10.1108/02635570310480015
Ehtesham Rasi, R., Abbasi, R. ve Hatami, D. (2019). The Effect of Supply Chain Agility Based on Supplier Innovation and Environmental Uncertainty. International Journal of Supply and Operations Management, 6(2), 94–109. https://doi.org/10.22034/2019.2.1
Gindy, N. N., Saad, S. M.ve Yue, Y. (1999). Manufacturing Responsiveness Through İntegrated Process Planning and Scheduling. International Journal of Production Research, 37(11), 2399–2418. https://doi.org/10.1080/002075499190572
Handfield, R. B. ve Bechtel, C. (2002). The Role of Trust and Relationship Structure in Improving Supply Chain Responsiveness. Industrial Marketing Management, 31(4), 367–382. https://doi.org/10.1016/S0019- 8501(01)00169-9
Harari, N. S., Fundin, A. ve Carlsson, A. L. (2018). Components of the Design Process of Flexible and Reconfigurable Assembly Systems. Procedia Manufacturing, 25, 549–556. https://doi.org/10.1016/j.promfg.2018.06.118
Holweg, M. (2005). An İnvestigation İnto Supplier Responsiveness: Empirical Evidence From the Automotive İndustry. The International Journal of Logistics Management, 16(1), 96–119. https://doi.org/10.1108/09574090510617376
Javanmard, H. (2011). The Role of Supplier Capabilities in Buyer Responsiveness. International Journal of Innovation Management and Technology, 2(5), 436–440.
Jean, R. J. B., Kim, D. ve Sinkovics, R. R. (2012). Drivers and Performance Outcomes of Supplier Innovation Generation in Customer-Supplier Relationships: The Role of Power-Dependence. Decision Sciences, 43(6), 1003–1038. https://doi.org/10.1111/j.1540-5915.2012.00380.x
Jermsittiparsert, K. ve Rungsrisawat, S. (2019). Impact Strategic Sourcing, Supplier Innovativeness, and Information Sharing on Supply Chain Agility. International Journal of Innovation, Creativity and Change, 5(2), 397–415. https://doi.org/10.18510/hssr.2019.7418
Jimenez, C. H. O., Machuca, J. A. D., Garrido-Vega, P. ve Filippini, R. (2015). The Pursuit of Responsiveness in Production Environments: From Flexibility to Reconfigurability. International Journal of Production Economics, 163, 157–172. https://doi.org/10.1016/j.ijpe.2014.09.020
Johnson, F., Leenders, M. R. ve Flynn, A. E. (2021). Purchasing and Supply Management (Fourteenth). McGraw-Hill Companies. https://doi.org/10.1201/b21595-5
Khettabi, I., Benyoucef, L. ve Boutiche, M. A. (2021). Sustainable Reconfigurable Manufacturing System Design Using Adapted MultiObjective Evolutionary Based Approaches, 1-32.
Khezri, A., Benderbal, H. H. ve Benyoucef, L. (2020). Towards a Sustainable Reconfigurable Manufacturing System (SRMS): Multi-objective Based Approaches for Process Plan Generation Problem. International Journal of Production Research, 1-26. https://Doi.Org/10.1080/00207543.2020.1766719
Koç, E. (2017). Tedarı̇k Zı̇ncı̇rı̇ Entegrasyonunun Yenı̇ Ürün Gelı̇ştı̇rme Üzerı̇ne Etkı̇sı̇. Ankara Üniversitesi Yayımlanmış Doktora Tezi.
Koren, Y. (2006). General RMS Characteristics. Comparison with Dedicate and Flexible Systems. Reconfigurable Manufacturing Systems and Transformable Factories, 27–45. https://doi.org/10.1007/3-540-29397-3
Koren, Y. (2010). The Global Manufacturing Revolution: Product-ProcessBusiness Integration and Reconfigurable Systems. John Wiley & Sons.
Koren, Y. (2013). The Rapid Responsiveness of RMS. International Journal of Production Research, 51(23–24), 1–14. https://doi.org/10.1080/00207543.2013.856528
Koren, Y., Gu, X. ve Guo, W. (2018). Reconfigurable Manufacturing Systems: Principles, Design, and Future Trends. Frontiers of Mechanical Engineering, 13(2), 121–136. https://doi.org/10.1007/s11465-018-0483-0
Kumar, G., Kumar Goyal, K. ve Batra, N. K. (2019). Evolution, Principles and Recent Trends in Reconfigurable Manufacturing System. Journal of Physics: Conference Series, 1240(1), 1–8. https://doi.org/10.1088/1742- 6596/1240/1/012161
Lam, L. W. (2012). Impact of Competitiveness on Salespeople's Commitment and Performance, Journal of Business Research, 65, 1328-1334.
Lee, N. C. A. - Wang, E. T. G. ve Grover, V. (2020). IOS Drivers of Manufacturer-Supplier Flexibility and Manufacturer Agility. Journal of Strategic Information Systems, 29(1), 1–18. https://doi.org/10.1016/j.jsis.2020.101594
Lummus, R. R., Duclos, L. K. ve Vokurka, R. J. (2003). Suppy Chain Flexibility: Building a New Model. Quarterly Journal of Global Institute of Flexible Systems Management, 4(4), 1–13. http://www.giftsociety.org/docs/Issues _pdf_2008/4-4.pdf#page=5
Maganha, I., Silva, C. ve Ferreira, L. M. D. F. (2018). Understanding Reconfigurability of Manufacturing Systems: An Empirical Analysis. Journal of Manufacturing Systems, 48(May), 120–130. https://doi.org/10.1016/j.jmsy.2018.07.004
Maganha, I., Silva, C. ve Ferreira, L. M. D. F. (2020). The Impact of Reconfigurability on the Operational Performance of Manufacturing Systems. Journal of Manufacturing Technology Management, 31(1), 145–168. https://doi.org/10.1108/JMTM-12-2018-0450
Maskell, B. (2001). The age of Agile Manufacturing. Supply Chain Management: An International Journal, 6(1), 5–11.
Mehrabi, M. G., Ulsoy, A. G., Koren, Y. ve Heytler, P. (2002). Trends and Perspectives in Filexible and Reconfigurable Manufacturing Systems. Journal of Intelligent Manufacturing, 13(2), 135–146.
Milner, J. M. ve Kouvelis, P. (2002). On the Complementary Value of Accurate Demand Information and Production and Supplier Flexibility. Manufacturing and Service Operations Management, 4(2), 99–113. https://doi.org/10.1287/msom.4.2.99.283
Musanga, M. B., Ondari, N. G. ve Kiswili, N. E. (2015). Buyer-Supplier Relationship and Supplier Responsiveness : A Case if Manufacturing Firms Listed in Nairobi Stock Exchange, Kenya. International Journal of Economics, Commerce and Management, 3(4), 1–23. http://ijecm.co.uk/
Schermelleh-Engel, K., Moosbrugger, H. ve Müller, H. (2003). Evaluating the Fit of Structural Equation Models: Tests of Significance and Descriptive Goodness-of-Fit Measures. Methods of Psychological Research Online, 8(2), 23–74.
Squire, B., Cousins, P. D., Lawson, B. ve Brown, S. (2009). The Effect of Supplier Manufacturing Capabilities on Buyer Responsiveness: The Role of Collaboration. International Journal of Operations and Production Management, 29(8), 766–788. https://doi.org/10.1108/01443570910977689
Sülek, A. N., Avşar, K. U. ve Schmidt, K. W. (2013). Yeniden Yapılandırılabilir Üretim Sistemleri İçin Kontrolcü Tasarımı. Çankaya Üniversitesi Bilim ve Mühendislik Dergisi, 10(1), 1–16.
Tseng, M. M., Wang, Y. ve Jiao, R. J. (2017). Mass Customization. Cirp Encyclopedia of Production Engineering, 1–14. Tüik (2019). Kobi İstatistikleri Raporu (2009-2019).
Türker, M., Balyemez, F. ve Biçer, A. A. (2005). Üretim Sürecinde Tedarik Zincirinin Önemi ve Maliyet Yönetimi. V. Ulusal Üretim Araştırmaları Sempozyumu, 459–465.
Ungan, M. C. (2011). En İyi Tedarik Zinciri Uygulamaları ve Bir Saha Çalışması. Süleyman Demirel Üniversitesi, İktisadi ve İdari Bilimler Fakültesi Dergisi, 16(2), 307–322.
Vickery, S., Roger, C. ve Dröge C. (1999). Supply Chain Flexibility: An Empiricial Study. Journal of Supply Chain Management, 35(2), 16–24. https://doi.org/10.1109/ICNC.2009.455
Voss, N., Kwaadgras, B., Mencer, O., Luk, W. ve Gaydadjiev, G. (2021). On Predictable Reconfigurable System Design. ACM Transactions on Architecture and Code Optimization (TACO), 18(2), 1-28.
Wang, G. ve Netemeyer, R. G. (2004). Salesperson Creative Performance: Conceptualization, Measurement, and Nomological Validity. Journal of Business Research, 57(8), 805–812. https://doi.org/10.1016/S0148- 2963(02)00483-6
Williamson, P. J. (1991). Supply Strategy and Customer Responsiveness: Managing the Links. Business Strategy Review, 2(2), 75–90.
Yaşlıoğlu, M. M. (2017). Sosyal Bilimlerde Faktör Analizi ve Geçerlilik : Keşfedici ve Doğrulayıcı Faktör Analizlerinin Kullanılması. Istanbul University Journal of the School of Business, 46, 74–85.
Yavuz, E. (2016). Üretim Yapan İşletmelerin Yeniden Yapılandırılabilir Üretim Bakımından İncelenmesi: Erzurum İli Örneği. Journal of International Social Research, 9(46), 857–865. https://doi.org/10.17719/jisr.20164622649
Yeh, C. ve Lee, Y. (2014). Construction of Speed-to-market Supply Chain Management Model for Garment Industry. Journal of Manufacturing Technology Management, 25(5), 734–746. https://doi.org/10.1108/JMTM-05-2012-0052
Zhang, Y., Wang L. ve Gao, J. (2017). Supplier Collaboration and Speed-tomarket of New Products: The Mediating and Moderating Effects. Journal of Intelligent Manufacturing, 28(3), 1–14. https://doi.org/10.1007/s10845-014-1021-5