ALTIN İÇİN Cu(II) KULLANILARAK OKSİDATİF KENETLENMEYE DAYAYAN SPETROFOTOMETRİK BİR TAYİN YÖNTEMİNİN GELİŞTİRİLMESİ

Bu çalışmada m- ve p-fenilendiaminlerin Cu(II) ve Au(III) ile verdiği reaksiyonlar spektrofotometrik ve potansiyometrik olarak incelenerek bir tayin yönteminin geliştirilmesi amaçlanmıştır. m- ve p-fenilendiamin karışımları ile Cu(II) ve Au(III)’ün verdiği reaksiyonlar sonucunda kompleksleşme üzerinden giden bir oksidasyon olduğu, bu oksidasyon sonucunda aminler arasında bir diazo bileşiği oluşurken Cu(II)’nin elementel hale Au(III) ün ise Au(I) basamağına indirgendiği görülmüştür. Ayrıca Cu(II) ile aminlerin verdikleri reaksiyonların oluşum koşulları incelenerek, reaksiyonun meydana geldiği pH aralığı, reaksiyonların oluşum süreleri ve bu metallerle aminlerin tam olarak reaksiyona girebilmesi için gerekli olan mol oranları bulunmuştur. Deneylerden elde edilen sonuçlardan Cu(II) ve Au(III)’ün aminlerle oluşturdukları oksidatif bağlanma ürünlerinin mol oranları; Cu(II)/(m+p)fenilendiamin = 1 / 2 ; Au(III) / (m+p)fenilendiamin= 1 / 2 olarak bulunmuştur. Spektrofotometrik ve potansiyometrik olarak yapılan bu deneyler sonucunda yeni basit bir spektrofotometrik tayin yönteminin temelleri ortaya konmuştur.

DEVELOPMENT OF SPECTROPHOTOMETRIC DETERMINATION METHOD OF GOLD BY OXIDATIVE COUPLING

 In this study, m- and p-phenylenediamine’s reactions which were in the presence of Cu(II) and Au(III) ions were investigated using spectrophotometric and potentiometric method. The results of the reactions between Cu(II) and Au(III) and m- and pphenylenediamine mixtures it was found out that, there is an oxidation by means of complexation. And as a result of oxidation, a diazo compound occured from amines and Cu(II) were reduced to elementel form, Au(III) was reduced to Au(I). Also the formation conditions of the reactions of these metals with amines were investigated, the pH range that the reactions takes place, time needed for the formation of the reactions and the mol ratios needed for the complete reaction of the metals with amines. Mole ratios are calculated as: Cu(II) / (m+p)phenylenediamine = 1 / 2; Au(III) / (m+p)phenylenediamine = 1/2 As a result of these spectrophotometric and potentiometric experiments, the basis of a new and easy determination method for Au(III) brought up.