PBT VE PET İPLİKLERİN TERMOGRAVİMETRİK, MİKROSKOPİK VE MEKANİK ANALİZLERİ

Bu çalışmada, farklı tipte poliester ipliklerinin termogravimetrik, mikroskopik ve mekanik özellikleri incelenmiş ve karşılaştırılmıştır. Bu amaçla, PET esaslı normal poliester ipliği ve çeşitli özellikler (güç tutuşurluk, ultraviole koruyuculuk ve antibakteriyel) kazandırılmak için modifiye edilmiş poliester iplikleri ve PBT ipliği seçilmiştir. Elde edilen sonuçlara göre, normal PET ipliği ile kıyaslandığında, PBT ipliğinin daha düşük Tdi değerine, daha yüksek kömürleşmiş kalıntıya, daha düşük kopma mukavemetine ve benzer yüzey özelliklerine sahip olduğu tespit edilmiştir. Modifikasyon işlemleri arasında ise yalnızca güç tutuşurluk işleminin termal özellik üzerinde değişikliğe sebep olduğu anlaşılmıştır

THERMOGRAVIMETRIC, MICROSCOPIC AND MECHANICAL ANALYSES OF PBT AND PET YARNS

In this study, thermogravimetric, microscopic and mechanical properties of different types of polyester yarns were investigated and compared. To this goal, PET based regular polyester yarn and polyester yarns modified for various specialities (flame-retardant, UV protective and antibacterial) and PBT yarn were selected. According to the results, it was determined that PBT had a lower Tdi value, higher char residue, lower tensile strength compared to regular PET and similar surface characteristics to regular PET. Among the modification processes, only the flame retardancy process was found to affect the thermal property

___

  • 1. Edwards JV, Buschle-Diller G, and Goheen SC, 2006, “Modified Fibers with Medical and Specialty Applications, Modification of Polyester for Medical Uses” Bide, M., and Phaneuf, M. (eds), Springer, Netherlands, Ch. 7, 91-125.
  • 2. Koç SK, and Hockenberger AŞ, 2010, “Investigation Of Air-Jet Texturing Of Technical Polyester Yarns”, Tekstil ve Konfeksiyon, 4, 299-305.
  • 3. Verdu P, Rego1 JM, Nieto J and Blanes M, 2009, “Comfort Analysis of Woven Cotton/Polyester Fabrics Modified with a New Elastic Fiber, Part 1 Preliminary Analysis of Comfort and Mechanical Properties”, Textile Research Journal, 79(1), 14–23.
  • 4. Scheirs J, and Long TE, 2003, “Modern Polyesters, Chemistry and Technology of Polyesters and Copolyesters”, Reese, G., John Wiley and Sons Ltd., England, Ch. 4, 401-433.
  • 5. Zhao L, Hu H and Wang S-H, “Fuzzy-integrative judgment on the end-use performance of knitted fabrics made with polytrimethylene terephthalate blended yarns”, Textile Research Journal, Article in Press.
  • 6. Zhang D, Sun C, Beard J, Zhao W, Carson I. and Hwo C, 2002, “Innovative Polytrimethylene Terephthalate (PTT) Polymers for Technical Nonwovens”, Journal of Industrial Textiles, 31(3), 159-178.
  • 7. Catalani LH, Collins G and Jaffe M, 2007, “Evidence for Molecular Orientation and Residual Charge in the Electrospinning of Poly(butylene terephthalate) Nanofibers”, Macromolecules, 40, 1693-1697.
  • 8. Militky J, Vanicek J, Krystufek and Hartych V, 1991, “Modified Polyester Fibres, Textile Science and Technology”, Elsevier, Ch. 10, 15-140.
  • 9. Yu L, Zhang S, Liu W, Zhu X, Chen X and Chen X, 2010, “Improving the flame retardancy of PET fabric by photo-induced grafting”, Polymer Degradation and Stability, 95, 1934-1942.
  • 10. Saravanan D., 2007, “UV Protection Textile Materials”, AUTEX Research Journal, 7(1), 53-62.
  • 11. Mathew G, Hong JP, Rhee JM, Lee HS and Nah C, 2005, “Preparation and characterization of properties of electrospun poly (butylene terephthalate) nanofibers filled with carbon nanotubes”, Polymer Testing, 24, 712–717.
  • 12. Wang D-Y, Wang Y-Z, Wang J-S, Chen D-Q, Zhou Q, Yang B and Li,W-Y, 2005, “Thermal oxidative degradation behaviors of flame-retardant copolyesters containing phosphorous linked pendent group/montmorillonite nanocomposites”, Polymer Degradation and Stability, 87, 171-176.
  • 13. Chang Y-L, Wang Y-Z, Ban D-M, Yang B and Zhao G-M, 2004, “A Novel Phosphorus-Containing Polymer as a Highly Effective Flame Retardant”, Macromol. Mater. Eng., 289, 703–707.
  • 14. Konwar U, Karak N and Mandal M, 2010, “Vegetable oil based highly branched polyester/clay silver nanocomposites as antimicrobial surface coating materials”, Progress in Organic Coatings, 68, 265–273.
  • 15. Saeed K., Park S-Y and Ali N, 2009, “Characterization of Poly (butylene Terephthalate) Electrospun Nanofibres Containing Titanium Oxide”, Iranian Polymer Journal, 18 (8), 671-677.
  • 16. Balabanovich, A.I., Pospiech, D., Häußler, L., Harnisch, C. and Döring, M., “Pyrolysis behavior of phosphorus polyesters”, Journal of Analytical and Applied Pyrolysis, 86 (1), 99-107.
  • 17. Chang S-J and Chang F-C, 1999, “Synthesis and Characterization of Copolyesters Containing the Phosphorus Linking Pendent Groups”, Journal of Applied Polymer Science, 72, 109–122.
  • 18. Levchik SV and Weil ED, 2005, “Flame retardancy of thermoplastic polyesters—a review of the recent literature”, Polymer International, 54, 11–35.
  • 19. Chang J-H, An YU, Kim SJ and Im S, 2003, “Poly(butylene terephthalate)/organoclay nanocomposites prepared by in situ interlayer polymerization and its fiber (II)”, Polymer; 44, 5655–5661.
Tekstil ve Konfeksiyon-Cover
  • ISSN: 1300-3356
  • Yayın Aralığı: Yılda 4 Sayı
  • Yayıncı: Ege Üniversitesi Tekstil ve Konfeksiyon Araştırma & Uygulama Merkezi
Sayıdaki Diğer Makaleler

HAZIR GİYİM SANAYİNDE ÜRETİM HATLARINDA MAKİNE DEĞİŞİM SÜRESİNİN EN AZA İNDİRİLMESİ

Aykut KENTLİ, Vedat DAL, Ali Fuat ALKAYA

Pseudevernia furfuracea (L.) Zopf EKSTRAKTLARI İLE MUAMELE EDİLEN DOĞAL DERİLERİN ANTİMİKROBİYAL AKTİVİTESİNİN DEĞERLENDİRMESİ

Mehmet Fatih TÜRKAN, Ahmet ASLAN, Ali Nail YAPICI, Binnur MERİÇLİ YAPICI, Sadi Turgut BİLGİ

TEKSTİL BOYA TERBİYE İŞLETMELERİNDE ZAMAN SERİLERİ MODELİ İLE TALEP TAHMİNİ

Emel Ceyhun SABIR, Esma BATUK

Thermogravimetric, microscopic and mechanical analyses of pbt and pet yarns

Buket ARIK, Aslı DEMİR, Ebru BOZACI, Esen ÖZDOĞAN

HAVA FİLTRASYONU AMACIYLA ERİYİK ÜFLEME (MELTBLOWN) YÖNTEMİNE GÖRE ÜRETİLEN DOKUSUZ YÜZEYLERİN FİZİKSEL ÖZELLİKLERİNİN İNCELENMESİ

Kerim DURAN, Deniz DURAN, Gülşah OYMAK, Kevser KILIÇ, Ezgi ÖNCÜ, Mehmet KARA

The study of flame retardancy and thermal properties of seacell® fabrics

B. Cenkkut GÜLTEKİN, S. Müge YÜKSELOĞLU, Mehmet AKALIN

Assessment of antimicrobial activity of natural leathers treated wıth pseudevernia furfuracea (L.) Zopf extracts

Ahmet ASLAN, Binnur YAPICI MERİÇLİ, Sadi Turgut BİLGİ, Ali Nail YAPICI, Mehmet Fatih TÜRKAN

Working capital management in Turkish clothing industry

Gülseren KARABAY

SeaCell® KUMAŞLARIN TERMAL ÖZELLİKLERİ VE GÜÇ TUTUŞURLUK ÖZELLİKLERİNİN İNCELENMESİ

B. Cenkkut GÜLTEKİN, Mehmet AKALIN, S. Müge YÜKSELOĞLU

The effects of fabric structural parameters on the breaking, bursting and impact strengths of diced woven fabrics

Hakan ÖZDEMİR, Engin MERT