KONFEKSİYON ÜRETİMİNDE İSTATİSTİKSEL YÖNTEMLE MONTAJ HATTI DENGELEME

Bu çalışmada, bir konfeksiyon işletmesinde beş farklı model kullanılarak, çok modelli hat dengeleme probleminin çözümü için sezgisel bir yöntem olan ve El-Sayed ve Boucher tarafından geliştirilen “Probabilistik (Olasılıklı) Hat Dengeleme Yöntemi” kullanılmıştır. Montaj hattı dengeleme problemi ile ilgili tanımlar ve çözüm yöntemleri hakkında bilgi verilmiş ve literatür araştırması sunulmuştur. Vaka çalışmasının amacı, sabit bir çevrim süresi için, optimum işgücü ve makina sayısı kullanarak en yüksek hat etkinliğine ulaşmaktır. Sonuçlar incelendiğinde istatistiksel yöntemin iş öğelerinin, iş istasyonlarına hassas bir şekilde atanmasına olanak sağladığı ve güvenilir sonuçlar verdiği görülmektedir

ASSEMBLY LINE BALANCING BY USING STATISTICAL METHOD IN CLOTHING PRODUCTION

In this study a heuristic assembly line balancing technique known as “Probabilistic Line Balancing Technique” developed by ElSayed and Boucher is applied to solve multi-model assembly line balancing problem in a clothing company for two different models. Information about definitions and solution methods related to the assembly line balancing problems is given and a literature research is introduced. The aim of the case study is to reach maximum line efficiency by using optimum machine and worker amount for a constant cycle time. When results investigated, it is seen that probabilistic method gives the opportunity to assign items to work stations more accurately and it gives reliable results

___

  • 1. Acar N. ve Eştaş S., 1991, “Kesikli Seri Üretim Sistemlerinde Planlama ve Kontrol Çalışmaları”, Milli Prodüktivite Yayınları: 309, Üçüncü Baskı, MPM Endüstri Şubesi, Ankara.
  • 2. McMullen, P.R. and Frazierb, G.V., 1997, “A Heuristic for Solving Mixed-Model Line Balancing Problems with Stochastic Task Durations and Parallel Stations”, ELSEVIER Int. J. Production Economics, 51, pp:177-190.
  • 3. Baybars, İ., 1986, “A Survey of Exact Algorithms for The Simple Assembly Line Balancing Problem”, Management Science, 32, 8, pp: 909–932.
  • 4. G. Suresh, V.V. Vinod and S. Sahu, 1996, “A genetic algorithm for assembly line balancing”, Production Planning and Control, 7, 1, pp: 38–46.
  • 5. El-Sayed, E.A. and Boucher, T.O., 1985, “Analysis and Control of Production Systems”, Prentice Hall Inc., New Jersey.
  • 6. Bowman, E.H., 1960, “Assembly Line Balancing by Linear Programming”, Operations Research, 8, 3, pp: 385-389.
  • 7. Talbot, F.B. and Patterson, J.H., 1984, “An Integer Programming with NetworkCuts for Solving the Assembly Line Balancing Problem”, Management Science, 30, 4, pp: 85-99.
  • 8. Bryton, B., 1954, “Balancing of a Continuous Production Line”, M.S. Thesis, Northwestern University, Evanson, ILL.
  • 9. Salveson, M.E., 1955, “The Assembly Line Balancing Problem”, Journal of Industrial Engineering, 6, 3, pp:18-25.
  • 10. Kilbridge, M.D. and Wester, L., 1961, “A Heuristic Method for Assembly Line Balancing, Journal of Industrial Engineering, 12, 4, pp: 292-298.
  • 11. Helgeson, W.P. and Birnie, D.P., 1961, “Assembly Line Balancing Using the Ranked Positional Weight Technique”, Journal of Industrial Engineering, 12, 6, pp: 384-398.
  • 12. Baskak, M., 1998, “Çok Modelli/ Ürünlü Montaj Hatlarının Dengelenmesi için Yeni Bir Model ve Çözüm Yöntemi”, Doktora Tezi, İ.T.Ü. Fen Bilimleri Enstitüsü, İstanbul.
  • 13. Vural, T. ve Çoruh, E., 2008, “Hücresel İmalat Sistem Yaklaşımı ve Hazır Giyim Sektörüne Yönelik Bir Model Önerisi“, Tekstil ve Konfeksiyon, 4, pp: 297- 305.
  • 14. Yücel, Ö., Güner, M.,2008, “Giysi Dikim Süresine Etki Eden Faktörlerin Analizi”, Tekstil ve Konfeksiyon, 1, pp: 41-48.
  • 15. Kanat, S., Güner, M., 2007, “Tekstil ve Konfeksiyon İşletmelerinde Verimlilik Ölçümü”, Tekstil ve Konfeksiyon, 4, pp: 279-283.
  • 16. Eryuruk, S.H., Kalaoglu,F., Baskak, M., 2008, “Assembly Line Balancing in a Clothing Company”, Fibres & Textiles in Eastern Europe January / March, Vol. 16, No. 1 (66), pp: 93-98.
  • 17. Kobu, B., 1979, “Üretim Yönetimi”, İstanbul Üniversitesi, İşletme Fakültesi, İşletme İktisadi Enstitüsü Yayınları.
  • 18. Tanyaş, M., 1995, “Endüstri Mühendisliğine Giriş”, Cilt 1, Bölüm 3: İş Etüdü ve Ergonomi, pp: 47-98, İrfan Yayınları.
Tekstil ve Konfeksiyon-Cover
  • ISSN: 1300-3356
  • Yayın Aralığı: Yılda 4 Sayı
  • Yayıncı: Ege Üniversitesi Tekstil ve Konfeksiyon Araştırma & Uygulama Merkezi