KATLANABİLİR HAROŞA YAPILARIN SIKIŞTIRILABİLİRLİK ÖZELLİĞİ

COMPRESSION OF FOLDABLE LINKS-LINKS KNITTED STRUCTURES

Folding of links-links knitted structures is based on the structural disequilibrium of face and reverse loops, which causes the fabric to form a 3-dimensional structure. Foldable structures shrink in both course and wale directions when relaxed. Under the applied strain in the horizontal or vertical direction, 3-dimensional structures smooth into a flat fabric, creases unfold and the structures expand in both directions. Fabric thickness increases with folding. Compressibility means a decrease in initial thickness due to the increase in compressive force at measuring time. It is affected by knitting parameters such as density, fabric thickness, texture etc. The aim of the research was to evaluate the compressibility of links-links weft knitted fabrics with a zigzag structure which could potentially be used as a packaging and mechanical damage protection material. The influence of the yarn material composition and repeat size on the compression properties of foldable links-links knitted structures was examined in order to evaluate their adequacy for compression resistant materials

___

  • 1. LIU, Y., HU, H., LAM, J. K. C., LIU, S., Negative Poisson’s ratio weft-knitted fabrics, Textile Research Journal, 2010, 80, p. 856–863 . 2. MURTHYGURU, Novel approach to study compression properties in textiles, Autex Research Journal, 2005, 5, No 4, p. 176–193.
  • 3. HUANG, W., GHOSH, T. K., Online Measurement of Fabric Mechanical Properties: Compressional behavior. In of the IEEE Annual Textile, Fiber and Film Industry Technical Conference: Proceedings, Atlanta, 4–6 May 1999.
  • 4. ALIMAA, D., MATSUO, T., NAKAJIMA, M., TAKAHASHI, M., YAMADA E.Y., Pressure-Thickness relation and Compression Mechanism of Plain and Rib Knitted Fabrics, Journal of Textile Machinery Society of Japan (English Edition), 2000, 46, No 1, 7–10.
  • 5. ERTEKIN, G., MARMARALI, A., The compression characteristics of weft knitted spacer fabrics, Tekstil ve Konfeksiyon, 2012, 22, No 4, p. 340–345.
  • 6. MOHKTARI, F., VAGHEFI, P. M., SHAMSHIRSAZ, M., LATIFI, M., Analysis of Compressibility Behaviour in Warp Knitted Spacer Fabrics: Expewrimenta and van Wyk Theory, Journal of Engineered Fibers and Fabrics, 2013, 8, No 3, p. 125–130.
  • 7. MECIT, D., ROYE, A., Investigation of a testing Method for Compression behavior of Spacer Fabrics Designed for Concrete Applications, Textile Research Journal, 2009, 79, p. 867–875.
  • 8. CIAO, H., QIAN, K., WEI, Q., LI, H., Compression After Impact of 3-D Integrated Hollow Core Sandwich Composites, Tekstil ve Konfeksiyon, 2011, 21, No 1, 16–21.
  • 9. LIU, Y., Hu, H., ZHAO, L., Long, H., Compression Behaviour of Warp-knitted Spacer Fabrics for Cushioning applications, Textile Research Journal, 2012, 82, 11–20.
  • 10. RANT, D., PAVKO-CUDEN, A., Foldable weft knitted structures with auxetic potential. In International Symposium in Knitting and Apparel, Textiles of the future – ISKA 2013: proceedings. Iaşi, Romania, Faculty of Textiles, Leather and Industrial Management, 21–22 June 2013, p. 45–49.
  • 11. RANT, D., PAVKO-CUDEN, A., Foldable links-links knitted structures with auxetic potential, Tekstilec, 2013, 56, No 3, p. 190–197.
Tekstil ve Konfeksiyon-Cover
  • ISSN: 1300-3356
  • Yayın Aralığı: Yılda 4 Sayı
  • Yayıncı: Ege Üniversitesi Tekstil ve Konfeksiyon Araştırma & Uygulama Merkezi
Sayıdaki Diğer Makaleler

TEKSTİL BOYA TERBİYE İŞLETMESİNDE ÜRETİM MALİYETİ VE SÜRESİNİN DEĞİŞKEN TALEP ALTINDA SİMÜLASYONLA MODELLENMESİ

Emel Ceyhun SABIR, Esma BATUK

DERİ ETEK ÜRETİMİNDE KULLANILMAK ÜZERE FARKLI TABAKLAMA MADDELERİ İLE TABAKLANMIŞ GİYSİLİK DERİLERİN FİZİKSEL VE HASLIK ÖZELLİKLERİNİN KARŞILAŞTIRMALI OLARAK BELİRLENMESİ

Nilay ÖRK, Hasan ÖZGÜNAY, Mehmet Mete MUTLU, Ziynet ÖNDOĞAN

İKİ KATLI BİRLEŞTİRME İŞLEMİNİN ANA KARAKTERİSTİKLERİNE ISI İLE BİRLEŞTİRME İŞLEMİNİN ETKİSİ ÜZERİNE BİR ARAŞTIRMA

Ionut DULGHERIU, Manuela AVADANEI, Ciprian COZMANCIUC

BİR HAZIR GİYİM İŞLETMESİNDE KAYNAK KISITLI KARMA MODELLİ MONTAJ HATTI DENGELEME

Mahmut GÜNGÖR, Saliha AĞAÇ

TEK RENKLİ DOKUMA KUMAŞLARIN YAPISAL PARAMETRELERİNİN GÖRÜNTÜ İŞLEME YÖNTEMİ İLE BELİRLENMESİ

Erkan TÜRKER

KATLANABİLİR HAROŞA YAPILARIN SIKIŞTIRILABİLİRLİK ÖZELLİĞİ

Darja RANT, Ramona CIOBANU, Mirela BLAGA, Alenka PAVKO-CUDEN

NANOİZ TESTİ İLE PLASTİK OPTİK LİFLERİN ÖZELLİKLERİNİN İNCELENMESİ

Juan HUANG, Dana KREMENÁKOVÁ, Jirí MİLİTKÝ

DİKİŞ MAKİNESİ İĞNESİ KAPLAMA MALZEMELERİNİN DİKİM AŞAMASINDA İĞNENİN ISINMASINA ETKİLERİNİN ANALİZ EDİLMESİ

Vedat DAL, Merve ERTINMAZ YARGICI, Serdar SALMAN

YIKAMANIN DENİM GÖRÜNÜMLÜ ÖRME KUMAŞLARIN BOYUTSAL STABİLİTESİNE ETKİSİ ÜZERİNE BİR ARAŞTIRMA

Züleyha DEĞİRMENCİ, Nihat ÇELİK

ÇEK ERKEK VÜCUT ORANLARI VE ERKEK GÖMLEK KALIBI HAZIRLAMA METOTLARI ÜZERİNE BİR ARAŞTIRMA

Blazena MUSİLOVÁ, Renáta NEMČOKOVÁ