Necla YAMAN, Tülin ÖKTEM, Necdet SEVENTEKİN

KARBON LİFLERİNİN ÖZELLİKLERİ VE KULLANIM OLANAKLARI

Performans/fiyat oranının değişimi ile karbon lifleri hızla kompozit materyallerde kullanılan metallerin yerini almaya başlamıştır. Daha hafif, dayanıklı ve daha etkili ticari ürün olan karbon liflerin kompozisyonları artık sadece uzay araçlarında değil otomotiv, inşaat ve kağıt endüstrisi gibi pek çok alanda kullanılmaktadır

Anahtar Kelimeler:

Germe dayanımı, karbon lif kullanımı, izotrop-anizotrop karbon

PROPERTIES OF CARBON FIBERS AND USAGE POSSIBILITIES

Carbon fibers have been used to supersede metals used for composite materials because of changing of performance/price rate. Carbon fibers that have been lighter, more strength and more efficient as commercial materials have been used not only space but also a good number of areas as automotive, civil engineering and paper industry

Keywords:

Tensile strength, carbon fiber usage, isotrop-anisotrop carbon,

PDF

___

1. http://www.eng.uab.edu/epcl/b_fiber.htm#carbon
2. Walsh P.J., Carbon Fibers, ASM Handbook, 2001, 21, 35-40
3. http://www.spmtips.com/products/hopg/
4. Seventekin, N., Kimyasal Lifler, 2001, İzmir, s: 136.
5. Zhou Y., Yang W., Xia Y. ve Mallick PK., An Experimental Study On The Tensile Behavior Of A Unidirectional Carbon Fiber Reinforced Aluminum Composite at different Strain Rates, Materials Science and Engineering, 2003, 362, 112-117.
6. Li JJ., Qiao ZJ., Zhao NQ., Shi CS., A Theoretic Calculation of Methane Adsorption By Activated Carbon Fibers, Journal of Tianjin Institute of Textile Science and Technology, 2002, 21(2), 1-3.
7. http://www.technica.net/NF/NF2/efibreinorganiche.htm
8. Wu Q., Pan D., A New Cellulose Based Carbon Fiber From a Lyocell Precursor, Textile Research Journal, 2002, 72(5), 405-410.
9. Matsumoto T., Mesophase pitch and its carbon fibers, Pure&Appl. Chem., 1985, 57(11), 1553-1562.
10. Worasuvannarak N., Hatori S., Nakagawa H. ve Miura K., Effect of Oxidation Pre-treatment at 220-270 0C on The Carbonization And Activation Behavior of Phenolic Resin Fiber, Carbon, 2003, 41, 933-944.
11. Barbosa-Coutinho E., Salim VMM. ve Borges CP., Preparation of Carbon Hollow Fiber Membranes by Pyrolysis of Polyetherimide, Carbon, 2003, 41, 1707-1714.
12. Schueler R., Joshi SP. ve Schulte K., Damage Detection In CFRP By Electrical Conductivity Mapping, Composites Science and Technology, 2001, 61(6),921-930.
13. Lintz TS., Robinson CB. ve Stahlman MD., Carbon Fiber and Ceramic Fiber Paper Composites and Uses Therefor, UnifraxCorporation, 1997, Patent Number: USP 5989736.
14. Pauljuchkou A., Industrial: Wear-resistant Vanes, Advanced Composites Bulletin, 1999, AUGUST 5.
15. Noisternig JF. ve Jungwirth D., Design and Analysis of Anchoring Systems For a Carbon Fiber Composite Cable, 2nd-Int. Conf. on Advanced Composite Materials in Bridges and Structures, Montreal, August 1996. 16. Brooks RA., Jones E., Storef A. ve Rushton N., Biological Evaluation of Carbon Fibre Reinforced Polybutylenterephthalate (CFRPBT) Employed in a Novel Acetabular Cup, Biomaterials, 2004, 25, 3429-3438.
17. Zhang Z., Liu Y., Huang Y., Liu L. ve Bao J., The Effect of Carbon-Fiber Surface Properties on The Electron-Beam Curing of Epoxy Resin Composites, Composites Science and Technology, 2002, 62(3), 331-337.
18. Clingerman ML., King JA., Schulz KH. ve Meyers JD., Evaluation of Electrical Conductivity Models for Conductive Polymer Composites, Journal of Applied Polymer Science, 2002, 83(6), 1341-1356.
19. Choi MH., Jeon BH. ve Chung IJ., The Effect of Coupling Agent on Electrical and Mechanical Properties of Carbon Fiber/Phenolic Resin Composites, Polymer, 2000, 41(9), 3243-3252.
20. Kojira K. ve Kiryu-shi, Agriculture and Horticulture: Plant Growth Promoted By Carbon Fibers, High Performance Textiles, 1999, 3-4.
21. Gao-Feng, Yao-Mu, Huo-Qunli, Electrical Properties of Short Carbon Fiber/Nitrile Butadiene Rubber (SCF/NBR) Composites, Xibei Fangzhi Gongxueyuan Xuebao. 1998, 12(2), 103-105.
22. Murakami K., Toshima H. ve Yamamoto M., Effect of Mesophase Pitches on Tensile Modulus of Pitch-Based Carbon Fibers, Sen-iGakkaishi, 1997, 53/3,73-78.
23. Ming-Chien-Yang ve Da-Guang-Yu, Influence of Oxidation Conditions on Polyacrylonitrile-Based Activated Hollow Carbon Fibers, Textiles Research Journal, 1996, 66(2), 115-121.
24. Hampl V.Jr., Schweitzer Mauduit International Inc.,Cigarette Paper Containing Carbon Fibers for Improved Ash Characteristics, U