DÖKÜNTÜ OLUŞUMU: İPLİK ÜRETİM SİSTEMLERİNİN ETKİSİ

İpliğin sonraki işlemleri sırasında, iplik-iplik sürtünmesi nedeniyle oluşan döküntü oluşumu, lif kaybına, iplik mukavemetinde azalmaya, kumaş üretimi sırasında makine ve çalışma ortamında problemler yaşanmasına yol açmakta ve kendini kumaş üzerinde hatalar şeklinde göstermektedir. Bütün bunların sonucunda, üretim verimliliğinde azalmaya neden olmaktadır. Bu çalışmada, farklı üretim sistemlerinde (ring, kompakt, rotor, RoCoS kompakt, siro) üretilen ipliklerin döküntü oluşturma özelliklerinin incelenmesi amaçlanmıştır. Bu ipliklerin döküntü oluşturma eğilimleri CTT cihazı ile test edilmiştir. Üretim sistemlerinin etkisi yanında, bobinleme işleminin döküntü oluşumuna etkisi incelenmiş ve iplik tüylülüğü ve döküntü oluşumu arasındaki ilişki istatistiksel olarak tespit edilmiştir. 

LINT GENERATION: THE EFFECTS OF YARN PRODUCTION SYSTEMS

Lint generation, which is occurred due to the yarn to yarn friction during the subsequent processing of the yarns is one of the yarn properties causing several problems such as fiber loss, decreasing in yarn strength, problems in machines and working environment during fabric production and showing itself as faults on fabrics. As a result of all, it causes decreasing in the production productivity. In this study, it was aimed to define the lint generation characteristics of the yarns produced by different production systems (ring, compact, rotor, RoCoS compact, siro). Lint generation tendencies of these yarns were tested by using CTT (Constant Tension Transport) instrument. Besides, the effects of the production systems, the influence of the winding process on lint shedding feature and the correlation between the yarn hairiness and lint generation was statistically investigated. 

___

  • 1. Koo Y.S., Kim H.D, “Friction of Cotton Yarn in Relation to Fluff Formation on Circular Knitting Machines”, Textile Research Journal, 2002, Vol.72 (17), pp.17-20
  • 2. Koo Y.S., “Yarn hairiness affecting fluff generation”, Fibers and Polymers, 2003, Vol.4 (3), pp.119-123
  • 3. Basu, A., Gotipamul, L.R., “Lint Shedding Propensity of Cotton and Blended Yarns”, Indian Journal of Fibre and Textile Research, 2003, Vol.28 (3), pp.288-294
  • 4. Yuksekkaya M.E., “A study of fly generation during raising”, The Journal of the Textile Institute, 2008, Vol.99 (4), pp.169-176
  • 5. Yuksekkaya M.E., “Fiber Fly Generation of Soybean Yarns during Weaving”, Journal of Textile Science and Engineering, 2012, Vol.2 (7), pp.1-5
  • 6. Bhomıck N., Ghosh A., “Role of Yarn Hairiness in Knitting Process and its Impact on Knitting Room’s Environment”, Wseas Transactions on Environment and Development, 2008, Vol. 4 (4), pp.360-371
  • 7. Bhomıck N., Ghosh, S., “Fibre Shedding from Cotton Spun Yarn-A Serious Indoor Air Pollution in Knitting Industry”, 2007, 5th WSEAS Int. Conf. on Environment, Ecosystems and Development, Tenerife, Spain, December 14-1
  • 8. Ghosh A., Patanaik A., Nandjiwala R. D., Rengasamy R. S., “A Study on Dynamic Friction of Different Spun Yarns”, Journal of Applied Polymer Science, 2008, Vol. 108 (5), pp.3233-3238
  • 9. Barella, A., Manich, A.M.,“Yarn Hairiness Update”, Textile Progress, 1997, Vol. 26 (4), pp.1-29
  • 10. Ozcelik K.G., “The Frictional and Lint Shedding Characteristics of Regenerated Cellulosic Yarns”, Industria Textila, 2014, Vol.65 (5), pp.263-270
  • 11. Süpüren G., Özçelik Kayseri G., Özdil N. , “A Research on Lint Generation Properties of Different Carpet Yarns”, 2010, XII IITAS, 28-30 October, İzmir
  • 12. Xu W. and et.al, “Embeddable and Locatable Spinning”, Textile Research Journal, 2010, Vol.81 (3), pp.223-229
  • 13. Su X., Gao W., Liu X., Xie C., Xu B., “Research on the Compact-Siro Spun Yarn Structure”, Fibres & Textiles in Eastern Europe, 2015,Vol.3 (111), pp.54-57.
  • 14. Yılmaz D., Büyük L., Topuz Z., “The Analysis of Yarn and Fabric Properties of Second Generation Compact Spinning Systems”, Electronic Journal of Textile Technologies, 2013, Vol.7 (3), pp.15-29
  • 15. Das A., Kothari V.K., Sadachar A., “Study on Characteristics of Compact Yarns under Dynamic State”, Fibers and Polymers, 2007, Vol.8 (1), pp.111-115
  • 16. Ute Bedez T., “A Comparative Study between the Dynamic Friction Characteristics of Compact and Siro Yarns”, Tekstil ve Konfeksiyon, 2016, Vol. 26 (1), pp.55-63
  • 17. Coll-Tortosa L., Marcelo. F.X., “Medición de la Vellosidad de los Hilados en Función de la Metodologia Utilizada”, Bol. Intexter 1992;,No. 102, pp.57-65
  • 18. Koo Y.S., “Waxing Effect on Lint Contamination in the Knitting Process”, Textile Research Journal, 2008, Vol. 78(2), pp.168–173.
  • 19. Telli A., Özdil N., “Lint Generation of the Yarns Produced PET Fibers”, International Congress of Innovative Textiles- ICONTEX, 20- 22 October, 2011, pp.32-35.
  • 20. Lawson-Hempfill, CTT User Manuel & Technical Documents
  • 21. www.lawsonhemphill.com
Tekstil ve Konfeksiyon-Cover
  • ISSN: 1300-3356
  • Yayın Aralığı: Yılda 4 Sayı
  • Yayıncı: Ege Üniversitesi Tekstil ve Konfeksiyon Araştırma & Uygulama Merkezi
Sayıdaki Diğer Makaleler

Abdelhamid Rajab Ramadan ABOALASAAD, Brigita Kolcavova SIRKOVA, Abdel-latif Mohamed EL-HOSSINI, Ali HEBEISH

YUMUŞATICI UYGULANMASININ FARKLI İPLİK YAPILARININDAN ÜRETİLMİŞ PAMUKLU ÖRME KUMAŞLARIN HAVA VE SU BUHARI GEÇİRGENLİKLERİNE ETKİSİ

Umut Kıvanç ŞAHİN, Sena CİMİLLİ DURU

SENTETİK ATIK SULARDAN BOYAR MADDELERİN KİTOSAN, ÇAPRAZ BAĞLI KİTOSAN VE KİTOSAN-POLİ (AKRİLİK ASİT) KONJUGATI İLE GİDERİLMESİ

Mithat ÇELEBİ, Zafer Ömer ÖZDEMİR

PAMUKLU KUMAŞLARIN BASILMASI İÇİN FARKLI DOĞAL BOYARMADDE KAYNAKLARININ KULLANILMASI

M. İbrahim BAHTİYARİ, Hüseyin BENLİ, Arzu YAVAŞ, Candan AKÇA

TEKSTİL VE HAZIR GİYİM SEKTÖRÜNDEKİ ÜRETİM YÖNETİCİLERİNİN TÜKENMİŞLİK DÜZEYLERİNİN ANALİZİ: TÜRKİYE ÖRNEĞİ

Mehmet KERTMEN, Seher KANAT, Turan ATILGAN

TEK ADIMDA MULTIFONKSIYONEL PAMUKLU DOKUMA KUMAŞ ÜRETİMİ

Şule SOYKAN, Necdet SEVENTEKİN, Esen ÖZDOĞAN, Zehra KOCATÜRK

KALİTE KONTROLDE YANIT YÜZEY DESENLERİ: İPLİK DÜZGÜNSÜZLÜĞÜ ÖRNEĞİ

Nefise Gönül ŞENGÖZ, Pınar ARSLAN

COMPARATIVE STUDY ON VISCOSE YARN AND KNITTED FABRIC MADE FROM OPEN END AND RIETER AIRJET SPINNING SYSTEM

Shoaib IQBAL, Moaz ELDEEB, Zuhaib AHMAD, Adnan MAZARİ

SÜRDÜRÜLEBİLİR KISA LİF İPLİK TEKNOLOJİSİ İÇİN GERİ DÖNÜŞÜM PAMUK VE POLYESTER LİFLERİNİN KULLANIMI

Abdurrahman TELLİ, Osman BABAARSLAN

ÇEVRE DOSTU RETENAJ UYGULAMALARI: TABAKHANE KİRLİLİK YÜKÜNÜ AZALTMAK İÇİN TABAKLAMA SONRASI SÜREÇLERDE TRANSGLUTAMİNAZ ENZİMİNİN (TGase) ROLÜ

Selime MENTEŞ ÇOLAK