ANAOKULLARI İÇİN KORUYUCU KOMPOZİT DUVAR KAPLAMASI TASARIMI

Bu çalışmada, çocuk yuvaları için nonwoven tekstil malzemelerinden oluşan koruyucu özellikte kompozit bir duvar kaplaması tasarlanmıştır. Bu ürünün tasarlanmasındaki amaç çocukların duvara çarpmaları sonucu doğabilecek yaralanmaları önlemektir. Ayrıca tekstil döküntüsü içeren nonwoven kumaşlar için yeni bir uygulama alanı yaratılmaya çalışılmıştır. Tasarlanan duvar kaplaması üç katlı yapıdadır ve bu katlarda kullanılmak üzere farklı tiplerde nonwoven tekstil malzemeleri seçilmiştir. Seçilen malzemelere kopma mukavemeti, yanma, basma dayanımı, yırtılma mukavemeti deneyleri uygulanmıştır. Bu deneylerin sonuçlarına göre tasarlanan duvar kaplaması için en uygun kombinasyon seçilmiş ve önerilerde bulunulmuştur

DESIGN OF PROTECTIVE COMPOSITE WALL-COVERING FOR KINDERGARTENS

A protective composite wall-covering composed of nonwovens was designed for the kindergartens. This wall-covering is aimed to prevent the injuries thay may occur as a result of children’s hitting the walls by accident in the kindergartens. It will also be a new application area for the nonwovens that contain recycled textiles. The wall-covering is composed of three layers, which are nonwovens of different types. The strength, burning, compression and tearing properties of the nonwovens were investigated. The appropriate components were chosen for the designed wall-covering according to the test results and some suggestions were recommended

___

  • 1. Divita, L., Dillard, B.G., 1999, “Recycling textile waste: An issue of interest to sewn products manufacturers”, Journal of the Textile Institute, 90/2, pp.14-26.
  • 2. Koch, M.C., 1998, “Managing textile waste”, PhD Thesis, Graduate Faculty of North Carolina State University, Raleigh, NC.
  • 3. Böttcher, P., 1994, “Textile recycling: current status and development trends”, ITB Nonwovens, 4, pp.4-7.
  • 4. Kunath, P., 1994, “Technological progress in needled nonwovens using recycled materials”, ITB Nonwovens, 4, pp.34-38.
  • 5. www.lot.com.tr
  • 6. www.homteks.com
  • 7. Bitz, K., 2003, “Nonwovens hit the wall”, Nonwovens Industry, 10, pp.28-32.
  • 8. Ponting,G.,2002, “Decorating: Anything goes, well almost”, www.nhic.org.uk/Pages/pp_04_2002_03.htm
  • 9. Akyıldız, N., 2005, İTÜ Maçka Anaokulu ve Kreşi Müdürü, kişisel görüşme.
  • 10. Ünal, A., 2005, Altınçağ Çocukevi Müdürü, kişisel görüşme.
  • 11. Aköz, N., 2005, İTÜ Sedat Üründül Anaokulu Müdürü, kişisel görüşme.
  • 12. SHÇEK, 1996, Özel Kreş ve Gündüz Bakımevleri ve Özel Çocuk Kulüpleri Kuruluş ve İşleyiş Esasları Hakkında Yönetmelik.
  • 13. EDANA ERT–40.3–90, 1990, “Nonwovens mass per unit area”, EDANA, Brussels.
  • 14. BS 2544, 1967, “Determination of thickness of textiles and textile products”, British Standards, London.
  • 15. EDANA ERT-20.2-89, 1989, “Nonwovens tensile strength”, EDANA, Brussels.
  • 16. EDANA ERT-70.2-89, 1989, “Nonwovens tear resistance”, EDANA, Brussels.
  • 17. TS 5775, 1988, “Dik konumdaki tekstil numunelerinin tutuşma ve yanma özellikleri”, Türk Standartları Enstitüsü, Ankara.
  • 18. ASTM F 793–93, 2004. Standard classification of wallcovering by durability characteristics, ASTM, West Conshohocken, PA.
Tekstil ve Konfeksiyon-Cover
  • ISSN: 1300-3356
  • Yayın Aralığı: Yılda 4 Sayı
  • Yayıncı: Ege Üniversitesi Tekstil ve Konfeksiyon Araştırma & Uygulama Merkezi
Sayıdaki Diğer Makaleler

An investigation of heat flow through kapok insulating material

Peng CUI, Fumei WANG

TEK KULLANIMLIK DOKUSUZ YÜZEYLERİN ANTİMİKROBİYAL, SU VE KAN İTİCİ BİTİM İŞLEMLERİNİN CTAB VE FLOROKİMYASAL KULLANARAK AYNI ANDA GERÇEKLEŞTİRİLMESİ

Majid MONTAZER, Fatma RANGCHI

FİLAMENT ÜRETİMİ ESNASINDA FİLAMENT İÇİNE YA DA KANALINA KATI VE SIVI MALZEMELERİN YERLEŞTİRİLMESİNE YÖNELİK YENİ BİR ÇALIŞMA

Nuray UÇAR, Ali DEMİR, Mehmet UÇAR, Emre BESKİSİZ

A study on specifying the effect of laser fading process on the colour and mechanical properties of the denim fabrics

Arif Taner ÖZGÜNEY, Gonca ÖZÇELİK, Kadir ÖZKAYA

Simultaneous antimicrobial, water and blood repellent finishing of disposal nonwovens using CTAB and fluorochemical

Majid MONTAZER, Fatma RANGCHI

BAZI EĞİRME PARAMETRELERİNİN FİLAMENT ÖZLÜ DREF-3 İPLİKLERİN MUKAVEMET ÖZELLİKLERİ ÜZERİNDEKİ ETKİSİ

Sevda ALTAŞ, Hüseyin KADOĞLU

The effects of inlay yarn amount and yarn count on extensibility and bursting strength of compression stockings

Yasemin KAVUŞTURAN, Nida ÖZBAYRAK

KOMPAKT İPLİKLERDEN ÜRETİLMİŞ DOKUMA KUMAŞLARIN TUTUM ÖZELLİKLERİ

Arif Taner ÖZGÜNEY, Cankut TAŞKIN, Gonca ÖZÇELİK, Pelin GÜRKAN ÜNAL, Arzu ÖZERDEM

KONFEKSİYON İŞLETMELERİNDE ÖRGÜTSEL ZAMAN YÖNETİMİ İÇİN ABC ANALİZİNİN UYGULANMASI

Mücella GÜNER

ATMOSFERİK PLAZMANIN YÜN LİFLERİNİN BASILABİLİRLİĞİNE ETKİSİ

Esen ÖZDOĞAN, Aslı DEMİR, H. Aylin KARAHAN, Hakan AYHAN, Necdet SEVENTEKİN