AA2014 ALÜMINYUM ALAŞIMI INGOTUN İÇYAPİSİNA HOMOJENIZASYON SİCAKLİĞINİN ETKISI

Endüstride demirden sonra en çok kullanılan alüminyum alaşımları, mekanik özelliklerinde gerçekleştirilen iyileştirme ile önemini bir kat daha artırmıştır. Malzeme özelliğinin tam olarak belirlenmesi ile tasarımcılara doğru malzemeyi seçme olanağı sağlanmaktadır. Bu çalışmada, mekanik özellikler üzerinde büyük etkiye sahip olan mikroyapı ve tane boyutunun homojenizasyon işlemi ile değişimi incelenmiştir. Homojenizasyon işlemi için 400, 440, 480, 500 ve 510 o C sıcaklıkta 4, 8 ve 24 saat fırında tutulan numunelere daha sonra havada, suda ve fırında soğutma işlemi uygulanmıştır. Isıl işlemi takip eden ilk hafta içerisinde tabii yaşlanma sertleşmesi hızı çok yüksek olduğundan deneyler 7. günün sonunda yapılmıştır. Homojenizasyon işlemi ile değişen tane büyüklüğü ve içyapı incelenmiş, ayrıca mekanik özelliklere olan etkisi araştırılmıştır.

THE EFFECT OF HOMOGENISATION TEMPERATURE ON THE MICRO STRUCTURE OF ALUMINIUM INGOT ALLOY (AA2014)

In Industry the improvements in mechanical properties of Al alloys, which are used most commonly after steel, has increased its importance. The full evaluation of material properties would lead the designers to make right chooses. In this study the variation of micro structure and grain size, which has great effect on the mechanical properties, has been investigated against homogenisation process. For the homogenisation workpieces were annealed at 400, 440, 500 and 510 o C for 4,8 and 24 hours respectively and then they were cooled in the air, waters and in a furnace. The workpieces have been rested at room temperature for a week in order to protect then from natural ageing. Then they were etched by the % 0.5 HF separator and pictures were taken at various magnifications. The homogenisation process changing by grain size and microstruture and their effects on the mechanical properties have been investigated.