Sac Şekillendirme İşleminde Sürtünmenin İncelenmesi
Derin çekme işleminde sürtünme, baskı plakası-sac metal-kalıp yüzeyleri arasında "radyal çekme bölgesinde" ve zımba-sac metal arasında "gerdirme bölgesinde" bölgelerinde gerçekleşmektedir. Bu bölgelerde oluşan sürtünme katsayısı, zımba kuvveti değerleri ve optik tarayıcıdan elde edilen genleme dağılımları kullanılarak iki yöntemle hesaplanmıştır. Bu hesaplama yöntemleri hem oda sıcaklığında hem de yüksek sıcaklıklarda kullanılabilir.Elde edilen sürtünme katsayısı değerleri diğer yöntemlerden elde edilen sonuçlar ile karşılaştırılmıştır. Konunun incelenmesi, elde edilecek sonuçların sürecin teorik modellenmesinde kullanımı ve kullanılan yağlayıcı maddelerin değerlendirilmesi açılarından da oldukça önemlidir.
___
- 1. Kaftanoǧlu B., 1973, Determination of
coefficient of friction under conditions of deepdrawing
and stretch forming, Wear, 25/2:177-
188.
- 2. Subramonian S, Kardes N, Demiralp Y, Jurich
M, Altan T., 2011, Evaluation of Stamping
Lubricants in Forming Galvannealed Steels for
Industrial Application, Journal of
Manufacturing Science and Engineering,
133/6:061001-9.
- 3. Yanagida A, Azushima A., 2009, Evaluation of
coefficients of friction in hot stamping by hot
flat drawing test, Annals of the CIRP, 58/1:247-
250.
- 4. Bech J, Bay N, Eriksen M., 1998, A Study of
Mechanisms of Liquid Lubrication in Metal
Forming, Annals of the CIRP, 47/1:221-226.
- 5. Schmoeckel D, Prier M, Staeves J., 1997,
Topography Deformation of Sheet Metal during
the Forming Process and Its Influence on
Friction, Annals of the CIRP, 46/1:175-178.
- 6. ] Berglund J, Brown CA, Rosén BG, Bay N.,
2010, Milled die steel surface roughness
correlation with steel sheet friction, Annals of
the CIRP, 59/1:577-580.
- 7. Makinouchi A, Teodosiu C, Nakagawa T.,
1998, Advance in FEM Simulation and its
Related Technologies in Sheet Metal Forming,
Annals of the CIRP, 47/2:641-649.
- 8. Vollertsen F, Hu Z., 2006, Tribological Size
Effects in Sheet Metal Forming Measured by a
Strip Drawing Test, Annals of the CIRP,
55/1:291-294.
- 9. Azushima A, Kudo H., 1995, Direct
Observation of Contact Behaviour to Interpret
the Pressure Dependence of the Coefficient of
Friction in Sheet Metal Forming, Annals of the
CIRP, 44/1:209-212.
- 10. Figueiredo L, Ramalho A, Oliveira MC,
Menezes LF, 2011, Experimental study of
friction in sheet metal forming, Wear, 271/9–
10:1651-1657.
- 11. Fratini L, Lo Casto S, Lo Valvo E., 2006, A
technical note on an experimental device to
measure friction coefficient in sheet metal
forming, Journal of Materials Processing
Technology, 172/1:16-21.
- 12. Weinmann KJ, Kernosky SK., 1996, Friction
Studies in Sheet Metal Forming Based on a
Unique Die Shoulder Force Transducer. Annals
of the CIRP, 45/1:269-272.
- 13. Yanagida A, Azushima A., 2009, Evaluation of
coefficients of friction in hot stamping by hot
flat drawing test. Annals of the CIRP, 58/1:247-
50.