Piramidal Bir Yüzeyin CNC Freze Tezgahlarında Düz Alınlı Parmak Freze Çakısı ile İmalatın Araştırılması
Bu
çalışmada, piramidal yüzeylerden biri olan eliptik paraboloidin CNC freze
tezgahında düz alınlı parmak freze çakısı ile imalatı amaçlanmıştır. Bu şekilde
bir imalat için, eliptik paraboloidin imalat denklemleri çıkartılmış ve takım
yollarının hesabı için, Fanuc işletim sistemli makro programlama ile otomatik
NC programının nasıl hazırlanacak' gösterilmiştir. Hazırlanan bu program ile DM
2900 tipi CNC freze tezgahında, örnek olarak paraboloid bir yüzey imal
edilmiştir. Yapılan bu imalat sonunda, imalat denklemlerindeki parametrelerin
hem imal edilen yüzeyin işlenme hassasiyetini hem de imalat zamanını etkilediği
görülmüştür.
___
- 1. Daoyuan, Y., Zhengcheng, D., Xiong, Z., and
Jinning, L., Local Discretization Without
Tolarence in The CAD/CAM and NC
Programming of a Sculptured Surface, Journal
of Materials Proccesing Technology 57 195-
200, (1995).
- 2. Vickers, G.W., and Quan, K.W., Ball-milis
versus end-Milis for Curved Surface Machining,
Trans. ASME. Journal of Engineering for
Industry, 22/Vol.11 I , Februarv (1989).
- 3. Choi, B.K., and Jun, C.S., Ball-end Cutter
Interference Avoidance in Nc Machining of
Sculptured Surfaces, Computer-Aided Design
Vol.21 No.6July/August (1989).
- 4. Elber, G., and Cohen, E., Toll Path Generation
for Freefrom Surface Models, 2nd ACM Solid
Modeling, 93-5/Montreal, Canada, (1993).
- 5. Choi, B.K., Lee, C.S.,Hwang, J.S. and Jun, C.S.,
Compound Surface Modelling and Machining,
Computer-Aided Design, Vol.20, No.3 April,
(1988)
- 6. Hwang, J.S., Interference-free Tool-Path
Generation in The NC Machining of Parametric
Compound Surfaces, Computer-Aided Design
Vnl 7d Mn 17 nerember ( 1 QQ71
7. Bobrow, J.E., NC Machine Tool Path
Generation From CSG Part Representations,
Computer-Aided Design, Vol.17, No.2, March,
(1985).
- 8. Park, S., Yang, M.Y.,and Lee C.W., Simulation
of NC Machining Using a Ball End Mill, Korea
Institute of Science and Technology,
CAD/CAM Laboratory, (1998).
- 9. Golub, A.D., and Yang, D.C.H., Improved
Trajectory Generation for Precision CNC
Milling of Arbitrary Contours and Surfaces,
Precision Machining: Technology and Machine
Development and Improvement ASME PED-
Vo1.58., (1992)
- 10. Dereli, T. ve Filiz H., Automatic CNC Code
Generation In Process Planning of Rotational
And Prismatic Parts, Politeknik Dergisi, Cilt:3
Sayı:2 s.1-25, 2000.
- 11. Dereli, T. ve Filiz H., Optimisation of Process
Planning Functions by Genetic Algorithms,
Computers & Industrial En getıering, Vol. 36,
No.2, 281-308, 1999.
- 12. Karagöz, Y., Nümerik Kontrollü Tezgahlar İçin
Programlama (CAM) Teknikleri, Mühendis ve
Makine-Cilt 41 Sayı 483. Nisan 2000.
- 13. DM 2900 Operation Manuel, Dyna
Mechatronics Inc. Ltd. 926 W. Maude Ave.
Sunnyvale, Ca.94086 U.S.A., 1996.