___

• Hancock, R., “Friction welding of aluminium
• cuts energy cost by 99%”,Welding Journal, Cilt
• , 40, 2004.
• Mishra, RS., Ma, ZY., “Friction stir welding and
• processing”, Materials Science and
• Engineering, Cilt 50, 1–78, 2005.
• Awang, M., Mucino,VH., Feng,Z., David, S.A.,
• ”Thermo-Mechanical Modeling of Friction Stir
• Spot Welding(FSSW) Process: Use of an
• Explicit Adaptive Meshing Scheme”, SAE
• International Paper, 01 1251-1256, 2005.
• Ma, N., Kunugia, A., Hirashima, T., Okubo, K.,
• Kamioka, M., “FEM Simulation for friction spot
• joining process”, Welding International, Cilt
• , No 1, 9-14, 2009.
• Yang, Q., Mironov, S., Sato, YS., Okamoto, K.,
• “Material flow during friction stir spot welding”,
• Materials Science and Engineering A, Cilt
• , No 16, 4389-4398, 2010.
• Bozzi, S., Helbert, AL., Baudin, T., Klosek, V.,
• Kerbiguet, JG., Criqui, B., “Influence of FSSW
• parameters on fracture mechanisms of 5182
• aluminium welds”, Journal of Materials
• Processing Technology, Cilt 210, 1429-1435,
• -
• Gerlich, A., Su, P., North, TH., Bendzsak, GJ.,
• “Friction stir spot welding of aluminum and
• magnesium alloys”, Materials Forum, Cilt 29,
• -294, 2005.
• Tozaki, Y., Uematsu, Y., Tokaji, K.,“Effect of
• processing parameters on static strength of
• dissimilar friction stir spot welds between
• different aluminium alloys”, Fatigue &
• Fracture Engineering Materials Structures,
• Cilt 30, 143-148, 2007.
• Badarinarayan, H., Shi, Y., Li, X., Okamoto, K.,
• “Effect of tool geometry on hook formation and
• static strength of friction stir spot welded
• aluminum 5754-O sheets”, International
• Journal Machine Tools&Manufacture, Cilt
• , 814-823, 2009.
• Badarinarayan, H., Yang, Q., Zhu, S., “Effect of
• tool geometry on static strength of friction stir
• spot welded aluminum alloy”, International
• Journal of Machine Tools &Manufacture,
• Cilt 49, 142-148, 2009.
• Karthikeyan, R., Balasubramanian, V.,
• “Predictions of the optimized friction stir spot
• welding process parameters for joining AA2024
• aluminum alloy using RSM”, International
• Journal Advance Manufacture Technology,
• Cilt 51, 173-183, 2010.
• Fratini, L., Barcellona, A., Buffa, G., Palmeri,
• D., “Friction stir spot welding of AA6082-T6:
• Influence of the most relevant process
• parameters and comparison with classic
• mechanical fastening techniques”, Engineering
• Manufacture, Cilt 221, 1111-1118, 2007.
• Yin, YH., Sun, N., North, TH., Hu, SS.,“Hook
• formation and mechanical properties in AZ31
• friction stir Spot welds”, Journal Materials
• Proccessing Technology, Cilt 210, 2062-2070,
• -
• Khan, MI., Kuntz, ML., Su, P., Gerlich, A.,
• North, T., Zhou, Y., “Resistance and friction stir
• spot welding of DP 600: A comparative study”,
• Science and Technology of Welding and
• Joining, Cilt 12, 175-182, 2007.
• Arıcı, A., Sınmaz, T., “Effect of double passes
• of the tool on friction stir welding of
• polyethylene”, Journal of Materials Science,
• Cilt 40, 3313-3316, 2005.
• Arıcı, A., Şelale, S., “Effects of tool tilt angle on
• tensile strenght and fracture locations of friction
• stir welding of polyethylene, Science and
• Technology of Welding and Joining, Cilt 12,
• -539, 2007.
• Squeoi, EA., Brunoi, G., Guglielmott, A.,
• Quadrini, F., “Friction stir welding of
• polyethylene sheets”, The Annals of Dunarea de
• Jos University of Galati,Technologies in
• Machine Building, Cilt 5, 241-246, 2009.
• Aydın, M., “Effects of welding parameters and
• preheating on the friction stir welding of
• UHMW-polyethylene”, Polymer-Plastics
• Technology and Engineering, Cilt 49, 595-
• , 2010.
• Arıcı, A., Mert, S., “Friction stir spot welding of
• polypropylene”, Journal of Reinforced Plastics
• and Composites, Cilt 1, 1-4, 2008.
• Oliveria, PHF., Filho, STA., Santos, JF., Hage,
• E., “Preliminary study on the feasibility of
• friction spot welding in PMMA”, Materials
• Letters, Cilt 64, 2098-2101, 2010.
• Bilici MK., Yükler, AI., Kurtulmuş, M.,“The
• optimization of welding parameters for friction
• stir spot welding of high density polyethylene
• sheets”, Materials Design, 32, 4074- 4079,
• -
• Peacock, AJ., “Handbook of Polyethylene,
• Marcel Decker Inc, New York, A.B.D., 2000.
• Santella, ML., Grant, GJ., Feng, Z., Hovanski,
• Y., “Friction stir spot welding of advanced high
• strength steel”, FY Progress Report, Oak Ridge
• National Laboratory, 2006.
• Costa, HM., Ramos, VD., Rocha, MCG.,
• “Rheological properties polypropylene during
• multiple extrusion”, Polymer Testing, Cilt 24,
• -93, 2005.
• Smith, AP., Spontek, RJ., Ade, H., “On the
• similarity of macromoleculer responses to high
• energy processes: mechanical milling v.s.
• irradiation”, Polymer Degradation and
• Stability, Cilt 72, 519-524, 2001.
• Capone, C., Landro, LD., Inzoli, F., Penco, M.,
• Sartore, L., “Thermal and mechanical
• degradation during polymer extrusion
• processing”, Polymer Engineering and
• Science, Cilt 47, 1813-1819, 2007.
• Gan, YX., Solomon, D., Reinbolt, M.,”Friction
• stir processing of particle reinforced composite
• materials”, Materials, Cilt 3, 329-350, 2010.