___

• H. M. Şahin, K. Kocatepe, R. Kayıkcı ve N. Akar “Determination of Unidirectional Heat Transfer Coef¬fi¬cient during Unsteady State Solidification at Metal Chill Interface” Energy Conversion and Management, (Accepted on 30 March 2005, in press).
• Fortin, G., Louchez, P., Samuel, F. H., “Factors Controlling Heat Transfer Coefficients at the Metal-Mold Interface During Solidification of Aluminum Alloys: An Analytical Study” AFS Transactions, Vol 100, 863-871, 1992.
• Hartley, J.G., Patterson, J.A.L., “The Influence of Temperature, Moisture Content and Binder Content on the Conductivity of Dried Bentonite-Bonded Zirkon and Silica Sands”, AFS Transac-tions, Vol 91, 183-190, 1983.
• Griffiths,W.D., “The Heat-Transfer Coefficient During the Unidirectional Solidification of an Al-Si Alloy Casting”, Metallurgical And Materials Transactions , Vol 30B, 437-482, 1999.
• Poirier D.R., and Poirier E.J., “Heat Transfer Fundamentals for Metal Castings”, The Mineral, Metals and Materials Society, ABD, 1992.
• Prabhu, K.N., Srinivas, G., Venkataraman, N., “Modeling Heat Transfer and Soldification Behavior of Gravity Diecast Al-Cu-Si Alloy (LM21) Plates”, AFS Transactions, Vol 101, 653-659, 1999.
• Kannaiah, P., Narayana, K.L., Roshan, H. Md., “Thermal Properties of Molding Sands: Casting-Over Probe Embedded Specimen Method”, AFS Transactions, Vol 95, 591-600, 1987.
• Hartley, J.G., Babcock, D., Berry, J.T., “The Ther-mal Conductivity of Bentonite-Bonded Molding Sands”, AFS Transactions, Vol 89, 469-476, 1981.
• Bandyopadhyay, B.P., Joshi, M.D., Chakraborty, P.N., “A Transient Method of Simultaneous Measurement of Thermal Properties of Moulding Sand Using Plane Heat Source”, British Foundryman, Vol 77, 318-321, 1984.
• Seshadri, M.R., Ramachandran, A., “Mold Materials Thermal Properties”, AFS Transac-tions, Vol 69, 616-624, 1961.
• Muojekwu, C.A., Samarasekera, I.V., Brimacombe, J.K., “Heat transfer and Microstructure during the Early Stages of Metal Solidification”, Metallurgical and Materials Transactions B, Vol 26, 361-382, 1995.
• Michel, F., Louchez, P. R., Samuel, F. H., “Heat Transfer Coefficient during Solidification of Al-Si Alloys: Effects of Mold Temperature, Coating Type and Thickness”, AFS Transactions, Vol 103, 275-283, 1995.
• Krishnan M and Sharma D.G.R, “Determination of Heat Transfer Coefficient Between Casting and Chill in Unidirectional Heat Flow”, AFS Transactions, Vol 102, 769-774, 1994.
• Biloni H and Chalmers B., “Predendritic Solidification”, Trans. Met. Soc. (AIME), Vol 233, 373-379, 1965.
• Prates M and Biloni H., Variables Affecting the Nature of the Chill Zone”, Met. Trans., Vol 3, 1501-1510, 1972.
• Ho, K., Pehlke, R.D., “Mechanisms of Heat Transfer at a Metal-Mold Interface”, AFS Trans¬actions, Vol 92, 587-598, 1984.
• El-Mahallawy N.A, and Assar A.M., “Effect of Melt Superheat on Heat Transfer Coefficient for Aluminium Solidifying against Copper Chill”, J. Materials Science, Vol 26, 1279-1733, 1991.
• Taha M.A, El-Mahallawy N.A, Assar A.W.M and Hammouda R.M., “Effect of Melt Superheat and Chill Material on Interfacial Heat-Trasnfer Coefficient in end-chill Al and Al-Cu Alloy Castings”, J. Materials Science, Vol 27, 3467-3473, 1992.
• Todoroki H, Lertarom L, Suziki T and Crumb A.W., “Heat Transfer Behaviour of Pure Iron and Nickel against a Water Cooled Copper Mold During Inıtıal Stage of Solidification”, Proceedings of 1997 Iron Making Conference, 731-742, 1997.
• Sun R., “Simulation and Study of Surface Conductance for Heat Flow in the Early Stage of Casting” AFS Cast Metals Research Journal, Vol 6, 105-110, 1970.
• Tadayon M.R and Lewis R.W, “A Model of Metal-Mould Interfacial Heat Transfer for Finite Element Simulation of Gravity-diecasting”, Cast Metals, Vol 1, 24-28, 1988.
• Davies, V.L., “Heat Transfer in Gravity Diecast-ings”, British Foundrymen, Vol 73 331-334, 1980.
• Chiesa, F, “Measurement of the Thermal Conduc¬tance at the Mold-Metal Interface of Permanent Molds”, AFS Transactions, Vol 98,193-200, 1990.
• Nyamekye, K., Wei, S., Askeland, D., Voigt, R.C., Pischel, R.P., Rasmussen, W., Ramsay, C., “A Rewiew of Permanent Mold Coating and Their Effect on Heat Transfer in the Mold”, AFS Transaction, Vol 101, 869-876, 1994.
• Assar, A.M., “Mould Surface Roughness and Interface Heat Transfer using Heat Flow Model”, Materials Science and Technology, Vol 13, 702-704, 1997.
• Özışık, M. N., “Finite Difference Methods in Heat Transfer”, Mechanical and Aerospace Engineering Department, North Carolina State University, ABD, 1994.
• Incropera, F., P., Dewitt, D., P., “Fundamentals of Heat and Mass Transfer”, John Wiley&Sons, Purdue University, School of Mechanical Engineering, ABD, 1996.Hallam, C.P., Griffiths, W.D., “A Model of the Interfacial Heat Transfer Coefficient for The Alüminum Gravity Die Casting Process”, Materials and Metallurgical Transactions, Vol 35, 721-733, 2004.
• Taha, M.A., El-Mahallawy, N.A., El-Mestekawi, M.T., Hassan, A. A., “Estimation of Air Gap and Heat Transfer Coefficient at Different Faces of Al and Al-Si Casting Solidifying in Permanent Mould”, Materials Science and Technology, Vol 17, 1093-1101, 2001.
• Wang,G.-X., Matthys, E.F., “Experimental Determination of the Interfacial Heat Transfer during Cooling and Solidification of Molten Metal Droplets Impacting on A Metallic Substrate: Effect of Roughness and Superheat”, International Journal of Heat and Mass Transfer, Vol 45, 4967–4981, 2002.
• Santos, C.A., Quaresma, J.M.V., Garcia, A., “Determination of Transient Interfacial Heat Transfer Coefficients in Chill Mold Casting”, Journal of Alloys and Compaunds, Vol 319, 174-186, 2001.
• Santos, C.A., Siqueira, C.A., Garcia, A., Quaresma, J.V.M., Spim, J.A., “Metal/Mold Heat Transfer Coefficients during Horizontal and Vertical Unsteady-State Solidification of Al-Cu and Sn-Pb Alloys”, 4th International Conference on Inverse Problems in Engineering, Rio de Janeiro, Brazil, 2002.
• Osorio, W.R., Garcia, A., “Modeling Dendritic Structure and Mechanical Properties of Zn–Al Alloys as A Function of Solidification Conditions”, Materials Science and Engineering A, Vol 325, 103–111, 2002.
• Siqueira, C.A., Cheung, N., Garcia, A., “The Columnar To Equiaxed Transition during Solidification of Sn–Pb Alloys”, Journal of Alloys and Compounds, Vol 351, 126–134, 2003.
• Peres, M.D., Siqueira, C.A., Garcia, A.,”Macrostructural and Microstructural Development in Al–Si Alloys Directionally Solidified under Unsteady-State Conditions”, Journal of Alloys and Compounds, Vol 381,168–181, 2004.
• Santos, C.A., Siqueira, C.A.,Garcia, A., Quaresma, J.M.V., Spim, J.A., “Metal–Mold Heat Transfer Coefficients during Horizontal and Vertical Unsteady-State Solidification of Al–Cu and Sn–Pb Alloys”, Inverse Problems in Science and Engineering, Vol 12, 279–296, 2004.
• Sá,F., Rocha,O.L., Siqueira, C.A., Garcia, A., “The Effect of Solidification Variables on Tertiary Dendrite Arm Spacing in Unsteady-State Directional Solidification of Sn–Pb And Al–Cu Alloys”, Materials Science and Engineering A , Vol 373, 131–138 2004.
• Spinelli, J.E., Rosa, D.M., Ferreira, I.L., Garcia, A., “Influence of Melt Convection On Dendritic Spacings of Downward Unsteady-State Directionally Solidified Al–Cu Alloys”, Materials Science and Engineering A, Vol 383, 271–282, 2004.