___

• Ghani, A.K., Choudhury, I.A., Husni, “Study of
• Tool Life, Surface Roughness and Vibration in
• Machining Nodular Cast Iron with Ceramic
• Tool”, J. of Materials Processing Tech., Cilt
• , 17-22, 2002.
• Masuda, M., Sato, T., Kori, T., Chujo, Y.,
• “Cutting Performance and Wear Mechanism of
• Alumina-Based Ceramic Tools when Machining
• Austempered Ductile Iron”, Wear, Cilt 174, No
• -2, 147-153, 1994.
• Pashby, I.R., Wallbank, J., Boud, F., “Ceramic
• Tool Wear when Machining Austempered Ductile
• Iron”, Wear, 162-164, 22-33, 1993.
• Şeker, U., Çiftçi, İ., Hasırcı, H., “The Effect of
• Alloying Elements on Surface Roughness and
• Cutting Forces during Machining of Ductile
• Iron”, Materials & Design, Cilt 24, No 1, 47-51,
• -
• Şeker, U. and Hasırcı, H., “Evaluation of
• Machinability of Austempered Ductile Irons in
• Terms of Cutting Forces and Surface Quality”,
• Journal of Materials Processing Technology,
• Cilt 173, No 3, 260-268, 2006.
• Ucun, İ., Aslantaş, K., Taşgetiren, S., “Küresel
• Grafitli Dökme Demirin Sinterlenmiş Karbür
• Kesici Takım ile Yüzey Frezeleme İşleminde
• Takım Aşınması ve Ömrü”, 3. Ulusal Makine
• Tasarım ve İmalat Teknolojileri Kongresi,
• Konya, 16-17 Eylül 2005.
• Cakır, M.C., Bayram, A., Işık, Y., Salar, B., “The
• Effects of Austempering Temperature and Time
• onto the Machinability of Austempered Ductile
• Iron”, Materials Science and Engineering: A”,
• Cilt 407, No 1-2, 147-153, 2005.
• İzgiz, S., Küresel Grafitli Dökme Demirler,
• Ankara, 1988.
• Shanmugan, S., Krishnamurthy, R.,
• “Machinability Study of Pearlitic Spheroridal
• Graphite Cast Iron”, Int. J. Prod. Res., Cilt 30,
• No 1, 189-197, 1992.