___

• Abukhshim, N.A., Mativenga, P.T. and Sheikh,
• M.A. “An İnvestigation of The Tool–Chip
• Contact Length and Wear in High-Speed Turning
• of En19 Steel”, Proceedings of Institution
• Mechanical Engineers Vol. Part B” Journal of
• Engineering Manufacture, Cilt 218, 889–903,
• -
• Iqbal, S.A., Mativenga, P.T. and Sheikh, M.A.
• “Characterization of The Machining of AISI
• Steel Over A Wide Range of Cutting
• Speeds-Part 1: Investigation of Contact
• Phenomena”, Proceedings of IMechE Part B:
• Journal of Engineering Manufacture, Cilt 221,
• No. 5, 909–916, 2007.
• Marinov, V., “The Tool Chip Contact Length on
• Orthogonal Metal Cutting”, Proceedings of 5th
• International Conference on Advanced
• Engineering and Technology”, AMTECH 99,
• Plovdiv, Bulgaria, 149–155, 1999.
• Mativenga, P.T., Abukhshim, N.A., Sheikh, M.A.
• and Hon, B.K.K. “An İnvestigation of Tool Chip
• Contact Phenomena in High-Speed Turning
• Using Coated Tools”, Proceedings of IMechE
• Part B: Journal of Engineering Manufacture,
• Cilt 220, 657–667, 2006.
• Friedman, M.Y. and Lenz, E. “Investigation of
• The Tool–Chip Contact Length in Metal Cutting”, International Journal of Machine
• Tools Design, Cilt 10, 401–416, 1970.
• Sadik, M. I. and Lindstrom, B. “The Role of
• Tool–Chip Contact Length in Metal Cutting”, J.
• Mater. Processing Technol., Cilt 37, 613–627,
• -
• Zorev, N.N. “Inter-Relationship Between Shear
• Processes Occuring Along Tool Face and Shear
• Plane in Metal Cutting”, Internationl Research
• in Production Engineering, 42–49. 1963.
• Sartkulvanich, V., and Altan, T., “Effects of Flow
• Stress And Friction Models İn Finite Element
• Simulation of Orthogonal Cutting-A Sensitivity
• Study”, Machining Science and Technology,
• Cilt 9, 1–25, 2005.
• Gordon, M., B., “A Study of Friction And
• Lubrication in Metal Cutting”, Cheboksary
• State University Press, in Russian, Cheboksary,
• -
• Petruha, G. G. “Cutting of Difficult-To-Cut
• Materials”, Machinostroenie, Moscow, in
• Russian, 1972.
• Bagchi, A. and P.K. Wright. “Stress Analysis in
• Machining With The Use of Sapphire Tools”, in:
• Proc. Royal Society of London, A 409: 99–113
• -
• Grzesik, W., “Determination of Temperature
• Distribution in The Cutting Zone Using Hybrid
• Analytical-Fem Technique”, International
• Journal of Machine Tools and Manufacture,
• Cilt. 46, No. 6, 651–658, 2006.
• Oxley, P.L.B. “Mechanics of Machining: An
• Analytical Approach to Assessing
• Machinability”, London: Ellis Horwood, 1989.
• Tay A. O., Stevenson M. G., de Vahl G. and
• Oxley P. L. B., “A Numerical Method For
• Calculating Temperature Distributions in
• Machining From Force And Shear Angle
• Measurement”, International Journal of
• Machine Tool Design and Research, Cilt 16,
• -349, 1976.
• Vinogradov, A., A., “Physical Foundations of the
• Process of Drilling Difficult-to-Cut Materials
• Using Carbide Drills”, Kiev, Naukova Dumka,
• -
• Abuladze, N.G. “Character and The Length of
• Tool-Chip Contact Proceedings of Machinability
• of Heat-Resistant and Titanium Alloys”,
• Kuibyshev, Russian’, 68–78, 1962.
• Lee, E. H. and B. W. Shaffer. “The Theory of
• Plasticity Applied To A Problem of Machining”,
• ASME J. Appl. Mech., 18, 405, 1951.
• Toropov, A., and Ko, S-L., “Prediction of Tool-
• Chip Contact Length Using a New Slip-Line
• Solution for Orthogonal Cutting”, International
• Journal of Machine Tools and Manufacture,
• Cilt 43, 1209–1215, 2003.
• Poletika, M., F., “Contact Loads on Tool Faces”
• Moscow, Russian, Machinostronie, 1969.
• Zhang H., T., Liu P., D., and Hu R., S., “A
• Three-Zone Model and Solution of Shear Angle
• in Orthogonal Machining”, Wear, Cilt 143, 29-
• , 1991.
• Stephenson, D.A., Jen, T-C. and Lavine, A.S.
• “Cutting Tool Temperature in Contour Turning:
• Transient Analysis and Experimental
• Verification”, Transactions of the ASME
• Journal of Manufacturing Science and
• Engineering, Cilt 119, 494–501, 1997.
• Marinov, V. “The Chip-Tool Contact Length in
• Orthogonal Metal Cuttıng” Fifth International
• Conference on Advanced engineering and
• technology, AMTECH’99, Plovdiv, Bulgaria,
• –155, 1999.
• Sutter, G. “Chip Geometries During High-Speed
• Machining for Orthogonal Cutting Conditions”,
• Int. J. Mach. Tools Mf., Cilt 45, 719-726, 2005.
• Moufki, A., Molinari, A., and Dudzenski, D.
• “Modelling of Orthogonal Cutting With A
• Temperature Dependent Friction Law”, J.
• Mechanics Physics Solids, Cilt 46(10), 2103-
• , 1998.