___

• Karaaslan, A., Yumurtacı, S., Sönmez, N., “Lazer
• ışını ile birleştirilmiş farklı malzemelerin kaynak
• dikişlerinde sertlik değişimleri”, II Makine
• Malzemesi ve İmalat Teknolojisi
• Sempozyumu, Manisa, 54-59, 2001.
• Yavuz, H., Çam, G., “Lazer-ark hibrit kaynak
• yöntemi”, Mühendis ve Makine, 46:14-19,
• -
• Beersiek, J., “On-line monitoring of keyhole
• instabilities during laser beam welding, 1st ed.”,
• Prometec Gmbh, Aerchan, 78-99, 1999.
• Nath, A.K., Sridhar, R., Ganesh, R., Kaul, R.,
• “Laser power coupling efficiency in conduction
• and keyhole welding of austenitic stainless steel”,
• Sadhana, 27:383-392, 2002.
• Wilson, J.,Hawkes, J.B.F., “Laser principles and
• applications, 1st ed.”, Prentice Hall, U.K., 3-24,
• -
• Sten, W.M., “Laser materials processing, 2nd ed.”,
• Springer-Verlag, London, 9-67, 1991.
• Benyounis, K.Y.,Olabi, A.G., Hashmi, M.S.J.,
• “Effect of laser welding parameters on the
• heating put and weld-bead profile”, Journal of
• Materials Processing Technology, 164:978-985,
• -
• Yılbaş, B.S., Arif, A.F.M., AbdulAleem, B.J.,
• “Laser welding of low carbon steel and thermal
• stress analysis”, Optics & Laser Technology, 42
• (5):760-768, 2009.
• Keskin, M.S., “Östenitik paslanmaz çeliğin lazer
• kaynağı yöntemiyle birleştirilmesinin
• incelenmesi”, 5. Uluslararası İleri Teknolojiler
• Sempozyumu, Karabük, 940-942, 2009.
• Zambon, A.,Ferro P., Bonollo, F., “Micro
• structural, compositional and residual stress
• evaluation of CO2 laser welded super austenitic
• AISI 904L stainless steel”, Materials Science
• and Engineering, A424:117-127, 2006.
• Chung, B.G., Rhee, S., Lee, C.H., “The effect of
• shielding gas types on CO2 laser tailored blank
• weld ability of low carbon automotive galvanized
• steel”, Materials Science and Engineering,
• A272:357-362, 1999.