___

• Carrilero, M.S., Marcos, M., J. Mech.
• Behav. Mater. vol. 7 (3), pp.179-191, 1996.
• Carrilero, M.S., Bienvenido, R., Sanchez,
• J.M., Alvarez, M., Gonzalez, A., Marcos, M.,
• “A SEM and EDS Insight into the BUL and
• BUE Difference in the Turning Processes of
• AA2024 Al-Cu Alloy”, International
• Journal of Machine Tools & Manufacture,
• vol. 42, pp. 215-220, 2002.
• Coroman, S., Modern Metal Cutting,
• Practical Handbook, Sweden, 1994.
• Sanchez, J.M., Rubio, E., Alvarez, M.,
• Sebastian, M.A., Marcos, M.,
• “Microstructural Characterisation of
• Material Adhered Over Cutting Tool in the
• Dry Machining of Aerospace Aluminium
• Alloys”, Journal of Materials Processing
• Technology, vol. 164-165, pp. 911-918,
• -
• Sanchez, M., Marcos, M., “Relaciones
• Parametricas en el Mecanizado”, Servicio
• de Publicaciones de la Universidad de
• Cadiz, Cadiz, Spain, 1994.
• Kendall, L.A., “Friction and Wear of
• Cutting Tools and Cutting Tool Material”,
• ASM Metal Handbook, Friction, Lubrication
• and Wear, vol. 18, ASM International,
• Ohio, USA, 1995.
• List, G., Nouari, M., Gehin, D., Gomez, S.,
• Manaud, J.P., Le Petitcorps, Y., Girot, F.,
• “Wear Behaviour of Cemented Carbide
• Tools in Dry Machining of Aluminium
• Alloy”, Wear, vol. 259, pp. 1177-1189,
• -
• Boothroyd, G., Kinght, W.A.,
• Fundamentals of Machining and Machine
• Tools, Marcel Dekker, New York, 1989.
• Şeker, U., Talaşlı İmalatta Takım
• Tasarımı Ders Notları, Gazi Üniversitesi,
• Fen Bilimleri Enstitüsü, Yüksek Lisans Ders
• Notları, Ankara, 2000.
• Trent, E.M., Metal Cutting, Butterworths,
• London, 1989.
• Bethencourt, M., Botana, F.J., Calvino, J.J.,
• Carrilero, M.S., Marcos, M., Proc. Electron
• Microscopy 98, vol. II, Cancun, Mexico,
• -
• Rubio, E.M., Camacho, A.M., Sanchez-
• Sola, J.M., Marcos, M., “Surface Roughness
• of AA7050 Alloy Turned Bars Analysis of
• the Influence of the Length of Machining”,
• Journal of Materials Processing
• Technology, vol. 162-163, pp. 682-689,
• -
• Gökkaya, H., Nalbant, M., “The Effects of
• Cutting Tool Geometry and Processing
• Parameters on the Surface Roughness Of
• AISI 1030 Steel”, Materials and Design,
• (2):717-721, 2007.
• Oishi, K., “Mirror Cutting of Aluminium
• with Sapphire Tool”, Journal of Materials
• Processing Technology, vol. 62, pp. 331-
• , 1996.