İKİ BOYUTLU PROFİLLERİN İŞLENMESİNDE TAKIM YOLU VE OFSETLEME İÇİN YENİ BİR ALGORİTMA GELİŞTİRİLMESİ

Bu çalışmada CNC freze tezgâhlarında cep frezeleme operasyonları için cep profiline uygun ve hatasız takımyollarının türetilmesi amacıyla yeni bir ofsetleme algoritması geliştirilmiştir. Bu algoritmada, dxf dosyayapısından cep profiline ait veriler okunmuştur. Ofset çizgileri ve ofset yayları profili oluşturan unsurlarınanalitik denklemleri kullanılarak hesaplanmıştır. Daha sonra hatalı kısımların atılması işlemini kolaylaştırmakiçin ofset çizgileri kesişim noktalarından kırılmıştır. Hatalı takım yollarının oluşmasına sebep olacak hatalı ofsetkısımları atılarak ofsetleme operasyonu tamamlanmıştır. Algoritma, AutoCAD programında hazırlanan DXFdosyası ve Delphi ile hazırlanan bir program ile uygulanmıştır. Böylece, farklı örnekler için ofsetlemealgoritmasının doğruluğu kanıtlanmıştır.

___

  • You, C., Sheen, B.,Tzu-Kuan Lin, T., “Robust
  • Spiral Tool-Path Generation for Arbitrary
  • Pockets”, Internatonal Journal of Advanced
  • Manufacturing Technology, 17:181–188, 2001.
  • Lai, Y., Wu, J., Hung, J., Chen, J., “A simple
  • method for invalid loops removal of planar offset
  • curves”, Internatonal Journal of Advanced
  • Manufacturing Technology, 27:1153–1162, 2006.
  • Choi, B., Park, S., “A pair-wise offset algorithm
  • for 2D point-sequence curve”, Computer-Aided
  • Design 31, 735–745, 1999.
  • Tiller, W., Hanson,E., “Offsets of Two-
  • Dimensional Profiles”, Structural Dynamics
  • Research Corporation, 1984.
  • Park, S., Choi, B., “Uncut free pocketing toolpaths
  • generation using pair-wise offset
  • algorithm”, Computer-Aided Design, 33, 739-
  • , 2001.
  • Yan, S., Shuilai, W., Shuiguang, T., “Uneven
  • offset method of NC tool path generation for
  • free-form pocket machining”, Computers in
  • Industry,43, 97–103, 2000.
  • Lee, E., “Contour ofset approach to spiral
  • toolpath generation with constant scallop height”,
  • Computer-Aided Design, 35, 511-518, 2003
  • Rohmfeld, R., “IGB-offset for plane curves-loop
  • remeoval by scanning of interval sequences”,
  • Computer Aided Geometric Design, 15, 339-375,
  • -
  • Jeong, J., Kim, K., “Generating Tool Paths for
  • Free-Form Pocket Machining Using z-Buffer-
  • Based Voronoi Diagrams”, Internatonal Journal
  • of Advanced Manufacturing Technology,
  • :182–187, 1999.
  • Held, M., ”Voronoi diagrams and offset curves of
  • curvilinear polygons ”, Computer-Aided Design,
  • Vol. 30, No. 4, pp. 287-300, 1998
  • Jeong, J., Kim, K., “Generation of Tool Paths for
  • Machining Free-Form Pockets with Islands Using
  • Distance Maps”,Internatonal Journal of Advanced
  • Manufacturing Technology, 15:311–316, 1999.
  • Liu, X., Yong, J., Zheng, G., Sun, J., “An offset
  • algorithm for polyline curves”, Computers in
  • Industry 58, 240–254, 2007.